 Hey guys shabber one thousand here Let's see if we can fix this broken throttle cable for this boat motor here. Okay guys I've already pulled this out this part out of the sleeve yesterday So there's not much for this. See this is just want to slide back Maybe slide back like that. No, okay? There's what the little tiny end looks like I've got a cable here That came off of the scooter and this was the issue with it how it was starting to fray and So I want to try to cut this cable down and maybe make a couple of them ends out of solder or something But we'll see Now to get this twist the rattle off we got to take this screw out and this screw out So let's do that right now that comes off like that and that comes off there Then that'll come off there See that's just kind of Just like just like the one on the scooter Okay, almost identical Say there's that one are pretty much identical. It's just longer longer sleeves. Let's go ahead and pull this out of here Okay We'll get a measurement on that go from there. See this might work See where yet? I may be able to this cable may work on this Let's say perfect So I got a cable. I just got to figure out how to make This little tiny end right here because it's a lot bigger This is a lot bigger than this end So I'm probably going to try to make this piece out of a drop of solder on the end of the cable But first let's get a measurement and we'll cut this cable now Okay, guys, I think I've got my length here. I May have cut the new one just a tad bit long just in case now What I got to do is I got to take this new Cable that we have here run it through here and Run it through Or yeah Because this comes up like that and we're gonna have to run it up through this casing Okay, and then it will There's the other end of it. It will come out through there but first I'm going to score some oil down in there and Get this all cleaned up so that don't happen again. Okay guys. I've got my cable run down through there Okay, and it is out Over here say that Okay Now let's hook Hook this up to the throttle See if I can do this so you guys can see it anyway, there's Through there like that and you flip this around goes on here. There's a hole Right there on both sides Okay, so you got to make sure you line it there it is Okay Now you got to get this one on there just like that Now let's tighten our screws up. Okay, so now I gotta do Is make my end for that We'll be all set Let's get some stuff out done this before and it has work But and then I just filed it down to meet the meet the contour of what I need I'm gonna let that cool, then we'll do a little filing. There we go guys Just like new Awesome Yeah So Monkey asked me why I was gonna keep this cable if it wasn't any good. Well, that's why monkey because I Figured maybe I could use it on something something else somewhere down the line. So All right guys This is not really well It's kind of a how-to but I understand a lot of a lot of people that you know You don't have the tools or don't have the solder or you know if They're not expensive, but I knew I could fix that one. So I knew I had a cable that may work But if if you're you know, you're kind of handy, but you're not real good at soldering or anything or filing down Yes, that's just ordering a one But if you got a friend that can do it call your friend over have a couple drinks and do a little cooking out and fix your engine So anyway, that's why don't throw anything away monkey So guys just want to say, you know, thanks for watching and remember guns don't kill people Husbands who come home early kill people All right guys listen. Take care. Shea barely met the man legend gone for now. Bye. Bye guys