 Welcome to our brand new series OSD TechBytes. Today we are live in our Synthagon Customer Center here in Weiblingen. We are standing in front of our TPR500 tablet press in one of our clean rooms. In this episode of our OSD TechBytes, we would like to talk to you about the features of the TPR500 when it comes to cleaning. The surface here you see is the remainder when the turret has been removed. It's very easy to clean and only leaves a few openings where powder actually could agglomerate. But there are also more features that we would like to show you in this episode. Follow me. In order to further improve the cleanability of the machine, we came up with the step design of the TPR. This way we can keep the lower compression rollers in the processing zone and therefore have a completely sealed area. That means the processing zone and the mechanical area below are completely separated. This also helps with the fact that there is almost no heat transfer from the drive to the processing zone above. And of course, no powder can reach down into the drive section. When it comes to cleaning of your machine, an essential part of it is cleaning off your punch seals. So our neat design offers you the chance to take out the punch seals located in our segmented seal plates. By pushing them out just with your fingertips, you can easily clean them or even have a second set of the segmented seal plates already prepared and put them back in so you could go back to production in no time. Thanks for watching the latest video of our OSD Tech Bites. Stay tuned for the next episode.