 Hi, this is Chichu again. Now what we're going to do in this video is frame Daredevil number one. I just recently got my hands on this and I probably haven't mentioned this before, but I'm a comic book collector. I actually did a stint as an independent publisher in the early 90s and I have been collecting comic books for about 25-plus years or so, about 25 years, actually a little bit more I think. And every now and then I go on a little buying spree and buy some comics and filter through some of their comics that I might have. Sometimes I sell them and acquire more money and buy more comics, right? I sort of cycle through the things. And what I do have is a fair bit of frames. I got my hands on a fair bit of frames like this and really big as well. And what I've been doing is framing my comic books and just putting on the wall because I like looking at them. I like reading them. And you will see some of the comic books that I have and some of the comic books that I will be reading. I've put up a bunch of videos for that. And the first set of comics that we'll be reading is some anthologies, some collections from the Golden Age from 1945, 52 and 58. And we're going to read three anthologies from the early 80s up to 1990. But for now, what I'm going to do is I'm going to be reframing some comics. I'm going to be taking some comics out and putting some new comics in. And I got the inspiration for that because I got my hands on the Stair Devil. So what we're going to do right now is take this Stair Devil, get it ready and frame it here. And this one here is showcase number 16. It's the first silver age appearance of the Spectre. It's one of the first comics that I did frame. I think it's the first comic that I've free for some reason. And what we're going to do is just take this out and put Stair Devil in it. And I'm going to do this to a few other comics as well, some of the frames I have as well. And I might show you those ones just to see how this video turns out. Okay. So what we're going to do first of all is take this guy out. I'm going to put the Daredevil on the side there. I'm going to put the Daredevil in mylar before we put in here without a backing board. And for your collectors out there, if you want to know what great this is, there's a tear right there. There's a top of it, right? You don't notice it in first glance. That's one reason I did buy this. It was more affordable than more expensive ones. But it's in pretty good shape. It's a little tan. It's a little yellowing. But the corners are not bad. It's got a nice spine to it. And the bottom is pretty good, right? So the only thing that's really hurting this comic is this tear right there and the tanning. But I like it. This is great coffee. It's the best coffee I have. And I want to look at it on the wall. So we're just going to put it in the frame. Okay. So what we're going to do is just put this on the side. And first order of business is to take this guy out. Okay. So I'm going to flip this. That's going to be the top. Now what I've done is put some heavy duty staples here. And I got some tools that I used last time to pull these things out. So I'm going to bring these guys out and take this out. Take this guy out. Just to hold the cardboard behind it. And these frames, I was lucky enough to get my hands on a bunch of these frames that someone I knew was getting rid of. They just asked me if I wanted it. And I was like, yeah, because they were doing a movement. Well, they are done the movement. They're just trying to make space. And they didn't have time to store these things. So what I'm doing right now, these little metal things here, if you can see them. I'm just pulling these back. And those hold the mat, I guess. That's what we call this. Or that's what they call it. I'm not an expert at this, obviously. A little exacto knife. Let's see if we can pull this out. It's taped on at the back. So it's in a good, sorry about the rough noise that it's on. And that's okay. And here's our first Silver Age Appearance of the Spectre. Okay. Showcase number 60. And I'm going to take this, and this guy's in, it's not in bad shape actually. It's probably very fine. It's very fine minus, fine plus somewhere in there. So I'm going to put this away. Now I'm going to put this aside right now because I don't want this thing getting wrecked. It is, I should have sleep that good. I do want to show you guys what I do here. So I'm going to move this over. So I got myself, and I'm just going to make sure this is going to fit, and it is. I got some Silver Age boards. I wasn't initially going to put a board behind it, but since I've got packing tape on there, I think it's a good idea. I don't want to stress out the comic. I'm just going to make sure this is a good size that it fits. I'm going to fit it onto the Mylar like this, right? It actually makes it easier to go to Mylar, so it's not a bad idea to do this. What we're going to do is take this guy out. And I'll show you guys what this thing was like for those of you. It's one of the best investments you could have made in the last few decades, right? So the board for this might as well use a fresh board, right? If this is going to be too tight, then we'll do it without the board. Still tight. So I'm just going to, when I do this, what I end up doing, I try to level it off at the bottom and make sure the tops, just the corners inside the Mylar, right? I like to give these a little bit more protection. So I'm just going to tap these. Brings it down, and it looks pretty good right now. Very centered. Pretty centered anyway. So I'm going to put this thing on the side, bring back our frame. Like this guy, I got to center this. This is a little off. Take measure. I just want to make sure this thing's sitting okay. It's about two and a quarter, a little bit more, and that's about two and a quarter, a little bit more. And one sixteenth more. Turn one sixteenth more. Yep, that's pretty good. It's fine. Let's just measure the column as well. Mylar is a little bit more at the top, so that's about three quarters of an inch. So that's good. I'm going to take this out. Now what I do need to do is clean the glass here. So not a professional, because obviously, right? I just want to make a wall that looks pretty. And this guy I'm just going to press down a little bit without my finger, so I don't leave fingerprints on there. Look this around. Maybe it's a little tough. So this thing's in there right now. I'm going to bend tops of these down, just so it holds them. I'm going to flip this thing around nicely centered. And you can tell there was another picture behind these, but I didn't like that. Back again, it goes. It's sitting nice. Reflection, so we're just not showing as well. There we go. It's a little bit closer. You're seeing the reflections in the back. So we're going to pull this back. Pull all these guys back. Now what I have is a nice little stapler gun. So this is going to sound a little short, but that's pretty. A little specks in there and stuff, but that's okay. I can live with it.