 Hey everyone shaper 1000 here today. We got this drill. Well, it's not a drill. It's a it's an impact driver It's a bower it's from Harbor Freight. I gave 40 bucks for this back in 2018 I think it was so it's going on five years old The first thing that happened to it was the LEDs went out the front. There's three LEDs in the front of this thing One there one there and one there now That didn't bother me too much But the problem now is the trigger You got to really push real hard and sometimes it gets stuck Like there, that's all the fat. That's all the trigger you got Like right there. You got to really push on it so We're gonna take this apart and see what's wrong with it still got you know A good battery life in it. I've only charged this thing like three times since I've had it and I use it a lot So that's what we're going to do. We're going to try to see if we can't figure out What's wrong with this trigger? I'm going to use my 62 and 1 precise electric screwdriver set. I use this quite a bit. This thing is handy. I did a review on it soon All right guys, let's go ahead and jump into this. Let's get it taken apart Let's see what we can do with it. Okay. I got my light set up here I don't know how well me you can see the reflection here, but Maybe if I move that up there that'll help. I don't know so anyway, let's go ahead and Open our little tool pouch up here. This is rechargeable Like I said, I've done a review on it. I've used this thing several times This thing's amazing. I love this thing you got a little magnet here You can put your screws on so they don't So they don't roll all over the place. We'll set that there Now let's see what this takes We need to take this off first so Like I said, it's not working properly It's almost You know, you don't even want to use it. So If if we can't fix it, you know, it's 40 bucks. I'll get another one slaps me four years That's $10 a year. You know, you can't do that with a Milwaukee or the walled or Makita All right, so it looks like we've got Torrex in the front there. They might all be the same, but let's just see Get along one here. I'm sure what size This tray is magnetic too next size. I think the other this one might be too big and it is okay Now let's get our little tool out here and then it Locks into place Magnetically, it's got a light on it. Of course, it's very quiet because it's so tiny that off bit Okay, let's see if these are the same size These ones are so smooth these over two different kind of screws so far Okay, so anyway This is the same size. It just had some dirt in it So I got it. It just wiggled it a little bit So far Think these are all the same size Yeah, I'll get this one now So much gunk in there. There it is a little bit of rust rust and dirt now Okay, so I'm gonna speed you up. I still got two four six seven more. So Now I got five more. So I'll speed you up This screw here does not have to come out. There's a place for it on either side That's to hang a metal clip so you can hang it off your belt. I don't you know, I don't use it So I don't have it on there All right, so let's see if we can get this apart here This is a 20 volt. I guess that's for 40 bucks. It has been very good to me. So All right, here's the problem. It's a piece of plastic there That may have been it may have been sticking down in there and keeping the The trigger from going all the way and I don't know what it's from It's not from it's not from here. I think that was it. Let's stick this back on here. Let's try it I don't know where it came from. I mean it wasn't surprising me because I have dropped this thing the height of the house before on to the driveway out there and it still worked fine Guessing I was guessing off that trigger, but I don't see any brook on there, but that was sticking there and I'm guessing that's what it was There's another piece. Let me see something here. It's not off of that because and it is at first one was first started acting out It saw this don't look that great It It didn't want to switch from forward to reverse Came out of there came out of the inside of here. Is that light helping any? Yeah, see she came out of the inside of there So that's what happened to that But it's kind of it really can't go anywhere You know what I mean? It's kind of snug in there That may have happened Of course, you know plastic gets old and brittle especially, you know if you're in a real warm climate Area like you know we're in Florida, so it's always hot no matter what I do with this thing. It's always hot slain in the sun But I think that's what it was these were keeping this from Let's put this on here Back on here. Let's try it out. It's a quick video for you Monkey asked me the other day if I was gonna do a video day for Christmas until Christmas. I said no, but But I'll try don't you know, I mean, it's not a I did it last year Put this up Here there we go Get this lined up down here Just like that Okay, now let's put our battery in it's not gonna hurt it's not gonna shock me. That's it See before remember we was only getting about right there and had to push real hard. We got it Okay, now Let's just go ahead and put this thing back together I know you should pull the battery out Yeah, I'm putting this one This one up top. So that way if I ever have to drill it out It'll be easier to get to so put it up here on top but yeah, I Didn't check them lights, but I'm not Like I said, I'm not gonna worry about these lights They were the first thing to go and I was like wow But I had had it almost a year before they went so all right. Let's get you sped up Okay, so I want to show you something this when you're Lot of the restorer guys restoration guys and And the people that that restore tools they'll tell you because if you if you're gonna be taking if you think you might be taking something apart again And you just screw and screws into Plastic it'll strip out pretty much first or second time So what I'm gonna do I'll show you what they do and what I've done for years But it was good to hear them talking about it was Okay, when you start not a good angle, but when you start that screw back it backwards until you I don't know if you can see that Let me see if I can get you in here a little better shot Okay, now see back it up and you'll feel click it might not be the best one, but I can feel it like clicking Sometimes you can see it go until you felt click and then it'll start right in Just like that. Let's let's see if we can do one more here for you So you put it in there and you can and if you just start screwing Well, it's gonna make new threads every time then you aren't out of plastic So back it off see it just dropped in it started Now we can Gonna go straight in One more for you In case you didn't see that one And now I'm gonna turn it I'm gonna turn it backwards There dropped in sometimes you can barely feel them, but if you go real loosely you'll feel it Like you'll feel it going and then it'll like drop even if you can't see it. You'll usually Usually feel it drop into that hole and that's where you started at See you don't strip that plastic out there that one dropped in really I know you didn't see that one so All right guys Well, that's pretty much that Make sure these are tight Let's get you back out here again I got touch screen on this thing and I can zoom in and out It's a little oops It's a little slower than if I just use the button, but the button I've got my Shotgun mic on and it kind of covers up The regular button up there and you got a kind of feel for but All right, so There we go. That was that was our problem right there Right there I can't see that going anywhere. I mean That's what it was. Let's try it one more time. Very nice I am very happy with that. I like when jobs go good like that. Hey guys, so there you go We fixed it. I am I going to fix this? No, no, I'm not A lot of guys would and there's nothing wrong with that, but as you can see This plastic is shrouded All the way around that handle it can't move up and down. It can't move left and right I mean a little bit, but you know, that's just natural. So I would say when I dropped it off the roof that time That's what happened that plastic got down in there and it wouldn't let the trigger go all the way I would say that's what That's what that issue was from In fact, if you look that trigger there right there I may have been I may have hit something on its way down But yeah, that's uh Yeah, I'm not gonna put those back in. I don't feel a need for it. If more of it breaks off Then I'll do something with it, but I'm gonna worry about it right now. All right guys, so there you go There's another video for you and I'm gonna put my stuff away get it all Packed back where it belongs in the In my little a little case here. I appreciate you guys watching I am In this thing I forgot to show you this too It won't slide out until you and this is a metal case Well, it's aluminum. It's an aluminum key. I think I think it's aluminum But it's you know, it's stout so yeah, um Lost track of what I was going to say you guys so anyway Hope you like my light show Of the house. I'll show you what we did inside and Put this back in here so it doesn't get all mucked up or Stick to a bunch just maybe stick inside there. I don't know But uh, yeah, I worked Two evenings. I didn't film setting them up this year Although the ring picked it up and I'm sure the other security cameras picked them up picked it up But yeah, and I tried to you guys my Eagle-eyed viewers will know I I done some done a couple things a little different this year I tried to do something a little different every year. So it's not the same thing so So you don't get bored with it and you know monkey and her mom they It was out together for a while monkey had an appointment and then while they was out They went to the mall and did a little Christmas shopping for the grandkids and uh So it looked really pretty for them when they got home so That's what I like about that. I'm just fiddling with this thing Uh, that you know, they can enjoy that. I've been opening wrong into the box guys All this time I've had this thing for what a year. I've been opening that size for food in a sec But yeah, so um I should charge it up. Well, I haven't charged it Uh, well, I can say once. Yeah, I charged it one time when I first got it But I haven't charged it since and I like I said this thing's been a godsend to me. Um I use it quite a bit. We got a lot of little things that Have screws, you know, you got to take a screw up put a battery in something or change the battery or whatnot But so anyway guys again I've got to put this in but I'll go ahead and charge it since it's out I make sure it's charged up for next time Thanks again for watching. Hope you guys this Christmas season is going well. If you don't celebrate Christmas I hope your month is going well And uh, I appreciate all your support And thanks again for watching guys. Uh, Shaybearer the mental legend. I'm gone for now My camera was crooked Sorry guys. I'm not a professional. I'm a youtuber We'll see you in the next one. Bye. Bye guys and take care Bonus footage. Okay, so we got these tweezers They came with this kit I don't know how well but you they're very very tiny um Just a little cap that goes on it because this will stab you that's how tiny they are it comes up to it like a needle point so That we've got these plastic little things you can pry off different things your little guitar picks different thicknesses To pry open a phone. I don't have one. Yeah, I do Here, you know to pry off a phone or Not laptop but your notebooks um Also, that's what this for this is for It's also got a little thing here for your Uh, to take memory cards out of like your phone and stuff Just got this little deal Kind of pointy on one side and more around on this side Um, and this is to put on your glass Like for fixing iPhones and stuff you put that suction on there and you and you heat that and you can pop it off I don't do a lot of that because I don't even mess with that kind of stuff But this thing I found really cool It's a magnetizer de magnetizer Uh for those this is for those of you that didn't see my uh video um just Take that stick it through there And magnetizes it now you're trying to get down into something and this keeps sticking to something. What do you do? You de magnetize it run it through that end It's no longer magnetized I just thought that was pretty cool. I wonder if I can magnetize this thing. Let's see. Well, that might not well Yeah, it did magnetize it So let's de magnetize it Run it through here again It's not magnetized anymore Yeah, that's pretty cool Well, this thing's still magnetized There we go Just wanted to throw that in there and show this to you. Oh, this is a C usb-c so Same thing my phone takes I got a little uh light there So when you plug it in, you know, it's charging and then you'll know when it's charged so All right, just a little bonus footage there for you Enjoy the rest of your weekend guys