 If you have CQG or Rhythmic data in Ninja Trader or other brokers, you'll be able to use that data in Bookmap simultaneously. In this video, we'll show you how to have two Rhythmic or CQG connections at the same time, one for Bookmap and the other for Ninja Trader. We'll start with Rhythmic. In case you have Rhythmic data, for example from Apex or any other broker, please follow the next steps. Step 1. Ask your broker to enable the market order data from your Rhythmic account, otherwise the data order flow won't be displayed on the Bookmap chart. Step 2. Make sure you have the Ninja Trader 8. Enable the Plugin Mode in Ninja Trader for the Rhythmic connection. For this, go to Connections, then Configure and check the Plugin Mode. Step 3. Under Connections, make sure the Rhythmic connection in Ninja Trader is disabled and then open RTrader Pro. Click the link above to watch how to configure the connection from Bookmap to RTrader Pro and Rhythmic. Here, I already followed the instructions of the video and everything is set. Type in your Rhythmic credentials in RTrader Pro and make sure that under System, the right value for your subscription is selected. Apex, Top Step or others. Make sure Allow Plugins Mode is enabled. Step 4. Launch RTrader by clicking on the arrow. Step 5. Open Ninja Trader, go to Connections and connect to Rhythmic. Step 6. Open Bookmap, go under Connections and connect to Rhythmic by checking the relevant box. That's it, you're done. Now you can use Rhythmic with Bookmap and Ninja Trader at the same time. If you have a CQG account for data, you can also connect it by creating a direct connection from Bookmap. Please check the video guide in the description for connecting to CQG. Note that CQG does not provide full depth data. Also, you need to ask your broker to have your account provisioned for both Bookmap Private Label and CQG Continuum in Cust. In simple words, you need to have two data connections to use your CQG credentials on both platforms.