 Hello, this is Laptop Media, and today, we will show you how to open the HP Z Book Studio G9 and what's inside of it. Interestingly, you need to pop the middle part of the back foot with a plastic tool to reveal one Torx head screw. The other four are visible, and after you undo them, you need to pry the bottom panel with the same tool you used for the foot. Remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. Once you're inside, you'll need to unplug the battery connector from the motherboard and remove the SSD from the single M.2 PCIe X4 slot, which fits Gen4 drives. This device comes with an 86Wh battery pack. It lasts for 15 hours of web browsing, or 13 hours and 30 minutes of video playback. To take out the battery, you need to undo a total of 7 Philips head screws. Thanks to the two Sodom slots, the device supports up to 64GB of DDR5 memory, working at 4,800MHz. As you can see, the cooling comprises a vapor chamber, which is connected to two heat spreaders. Two fans are then blowing the heat away from the chassis. If you'd like to see more disassembly videos of the latest notebooks we would highly appreciate if you hit the like button and subscribe to the channel.