 Ladies and gentlemen, keep your hands in the right of time. And let's get ready for Hot Makes! Ladies and gentlemen, welcome to Hot Makes right here on the Edgatech, where we like to educate you and have fun and all that fun stuff. Ladies and gentlemen, I'm Dirty Jay. This is The Pooch, how you doing? I'm The Pooch and I'm fantastic, man. How was your weekend? Man, my weekend was awesome. It was super cold here, like super cold. I think I took some screenshots and was shooting them out. There was negative eight for a while yesterday. I think I went negative nine this morning when I got out to my car. So, oh, man, you got that feeling of vortex. 20-something wind chill, you know, but it was freezing. Oh, well, did you get the day off? It's President's Day weekend, man. So you're working the long weekend or no? Come on, it's President's Day. We don't get President's Day. What kind of holiday is President's Day? I don't know. Have a good weekend? Yeah, yeah, it was good. Actually, I actually did close the shop for President's Day, mostly because my kids had the day off school. And so I was hanging here with them. But we had a good old time. You know, it's been kind of rainy. I mean, thankfully, we don't have the polar vortex to contend with, but it has been kind of cold or rainy or here, but not in the negative nine. Polar vortex or it's just stinking cold, but it's cold here. And we're supposed to get some more snow tonight. We've got a ton of snow in the last couple of weeks, but we're supposed to get more tonight. And then we're going back up to the 20s, baby. Heat wave. Ooh, heat wave. Heat wave in the 20s. How much snow is it talking about? You get that roof rake out? You get the roof rake out and get some raking done? I need to make it so cold that it snowed Saturday again. It was snowing Saturday. I had to go out and shovel in snowblow because my in-laws came over for a little while to celebrate my father-in-law's birthday, so happy birthday. And so I jumped out there and I was out there for maybe a half hour and it was, you know, I don't even know, negative, whatever. And I'm just like, nah, I'm going back in. So I did not roof rake yet, but I need to, I need to. Well, and then it was also Valentine's Day, right? So I hope you did something nice for the Mrs. Yeah, I did. I didn't take a picture of it, but I actually, behind the scenes in our little editing program, she can see it too. So while she was sleeping, I created a design and then I burned it in a frame on the laser, on one of the lasers. And it was actually, yeah, I removed it from the editing program so she couldn't see it, but I burned it in the laser in a frame and it said like, you know, I love you, Lindsay, you know, the classic. And then in the center, it had all the, like my vows. Like we wrote our own vows. And I, mine were hilarious and a lot of you guys would understand most of them if I played, you know, if I actually showed you what they were, but, but like bullet points in the different parts of my vows, you know, in the center. And I thought that was, you know, I thought it was a very thoughtful, nice, romantic thing to do. And she really liked it. So. To, you know, to organize people, they appreciate a good bullet point list, Val. So that's good. Solid. In retrospect, I should have used heart bullet points. I thought about that afterwards. Man, that's one of those things, you know, you're like, oh, that would have been really cute. You know, but yeah, next Valentine's Day, right? Yeah. I didn't know I didn't put any tongue oil on it. So it's just dry. All right. No oil on it. Yes. No, God, no, God, please, no. That joke is never going to get old, my friend. And never. I know, I know. How about you? It was good. Like I said, it was a good weekend, I hung with the kids. Allie came away, my girlfriend Allie came over and hung with us too. We had a good Valentine's Day together. And how about you guys out there in Chatlan, tell us what you did for Valentine's Day. We've seen some pretty epic makes that have been Valentine's related. We did some last week. I think we got a couple still in the queue from this week. So we'll take a look at that. And while, you know, while I'm talking to the people out there, I'll just say, if you're new to the stream, welcome. This is HotMakes, the show where you, the community, tag things HotMakes on the Twitters and soon to be Instagrams. Give us the tag. There it is. And then we collect all those things because you don't have that kind of time to be on Twitter. You know, Jim does, but we don't all have that kind of time to be on Twitter, looking through all the awesome things that people have been sharing all week. And so we share it with you, right? That is 100% true. And the time I have is not actually enough time. So a lot of times I first see a lot of things on Monday when I'm putting together the HotMakes for the show. So whoa, I'm a fake one. We got your penguin now. Look at that. Tech with Hudson, he says, he sent an email with his question. I'm assuming your email. So Jim's going to check out his email and we'll see what Tim's question was. Hopefully, he just sent an email to anyone. He just sent an email. Now he's some lobster, so today I'm just to throw it out there. I made myself a white chocolate, butterscotch iced espresso drink. What's kind of tea? Are you still on tea? I'm still on tea, but I've been honestly, I've been doing the chai tea with a little bit of rice milk in it. I know it's really teamed by the standards, but I gotta tell you, since I think it's been three weeks plus now without coffee and I think it's like I know what the world is like normally again too. So I haven't been having my heavy crash. I've been having a lot less sugar, because I've never been a black coffee person, so it's like I do the cream and the sugar thing. And so just cutting that down has been good for the energy and stuff like that too. And so I think it's been a good exercise. I absolutely try to, yeah. Ethan says hi, hello back Ethan. I hope you're helping your dad with the testing we were on with them last week. If you haven't checked out their awesome little app, that 3D scanner app. I actually got a comp version from Martin and Ethan and I was playing with it and it's pretty cool man. I gotta say, I'm still getting the hang of it because it takes a little bit of practice to get the right, because it'll kind of lose the tracking and then you get all weird and stuff like that. I think you need a friend or honestly, I still have to get the little mirror attachment because I think that'll make it a lot easier to scan things. Like doing the selfie thing is really tough. You can't get the back of your head. It looks like you have a hollow head and stuff, but anyway. Oh, Bernard James is turning out to be scary. Yeah. You know what's funny is Andrew made it look so easy, right? So. Yeah, you really did. You really did. Bernard James, thank you so much, we can start over. Oh, we're starting over? Okay, do the intro. Ooh, ladies off. Just joking. It seems that there are men, boys and girls. You're penguin again. Welcome to the main event. All right. Hey, what do you got next to there? What is that? This? Yeah. This right here is the Prusa Mini from Loyal Moses. Whoa, it finally came. Yes. Thank you to Loyal for that. Yeah. I am so pumped. You can't, I'm like literally, I have four printers around me in boxes currently. Yeah. And there's this one and one other one that I am absolutely just totally stoked about. You know, yeah. That's, I mean, this one is gonna be so awesome. I'm gonna attempt to bring it to my desk at work and see how long it takes before I get in trouble. But because it's so little, I think it'll be perfect. We can just print stuff all day. What? It's always better to just play dumb. Honestly, you've shown amazing restraint having not already taken it out and built the thing. I had, I got it last week, you know? And I promise. Oh my gosh, you've been sitting on this a week? I've had it, I got it like Thursday-ish, I don't remember. But the problem is I promised I would livestream it. I told Loyal Moses now, I'm gonna do this on a stream. And so I'm gonna do it, I think I'm gonna do it Wednesday. Wednesday after work, we're gonna knock this thing out and we're gonna get this thing running. I'm so pumped. I just watched Billy Rubin. Did you see? She did one too recently. I was on chatting with her on her livestream and that was a lot of fun, a lot of great people there. And I'm seriously, I'm so pumped for this. Now the second one I'm really pumped about in Loyal Moses, if I know you're watching her, maybe you're not here yet, but thank you. Thank you, thank you, thank you. Because in the end of October, I think, or maybe it was early, the first weekend or first week of November, whatever, you grabbed this for me and he bought this for me. And I can't thank him enough. I'm so excited to try a Prusa machine finally. But there's one more that I'm like beyond excited about. Prusa? Are you ready to see this? Yeah, yeah, yeah. What do you got? This is a classic pose. Now are you ready? Yeah, are you ready? Wait. Look at this. Okay. Hey! Look at this. Yes! That right there is just, I came home today and it was sitting on my doorstep. Oh no. Naomi, Naomi, you know, she likes to watch behind the scenes when we're on live. If she's watching, thank you so much. I was already chatting her, she's already up. It's super early out there too. But I was chatting her, I said thank you. I do have one from production coming as well. I ordered one from the Kickstarter. But I do believe this one was straight from Naomi. Thank you. I, or not this one, but you know, that one. I am so pumped to put that thing together. I know some other people have them and really like them. Yeah. And really like to call them. Yeah, that would be awesome. I'm eager to hear what you think about it, man. Yeah. Yeah, cool. Yeah, what do you think of? Start cranking them out. Well, you know me. I've always been a fan of the belt printers and I've heard nothing but good things. So, you know, it'll be really cool to have one that we can feature on the show once you get it together and you can show us what you got. Show me what you got. I'm serious. When I get my production one, what I really want is, I want to set them both up at like the sides of the table and like print swords and let's joust. Three printer jousting. Yeah. I can't, that's going to be awesome. But I'm really pumped for both these printers, the Prusa because I'm super stoked to have one and the 3D print mill because it's a belt printer. I mean, I mean, ever since I've seen Carl's, Carl's stuff is awesome. And ever since I saw his, the first Murph I went to, I was just like, this is amazing, you know? That's fantastic, dude. Yeah, I know lots to look forward to this week in the build world. So you're going to do the mini build on Wednesday and then maybe later in the week or next week, the CR-10 or are you going to just get the CR-10 together and not do a build on stream? The print mill? I'm sorry, the CR-30, you're right. The CR-30, yeah. Yeah, I have an Ender 3 Max down here too, I have to get done. Oh my gosh, man. But yeah, we will find out. I'm going to attempt, I think that one's going to take a little bit longer than the mini. Yeah, yeah. Well, cool. Speaking of, Gregs Baker Coiner, thank you so much. Hope printers means more money. I don't know about that, but it means more fun. You know, that's what that means. Speaking of crazy stuff that happened since we were here last, did you see the cat lawyer? Sure did. The cat lawyer, we got to jump into the cat lawyer. Real quick, if you didn't see this yet, I'm hoping you guys can hear this. I did share the audio. So a little bit of history. This lawyer was using his assistance PC to jump on a deposition, we'll call it, a trial. And in last minute, he had to use his, I think it sounded like he had to use his assistance PC who has a daughter who is using a cat filter on Zoom. And they couldn't figure out how to get it off. And it was amazing. The world is on fire right now. It was all over the news. And honestly, I mean, it's funny and that kind of thing happens and it's happened before and it'll happen again. But why this got picked up? So, I mean, just show it. Oh man. All right, let's do this. I'm gonna make this full screen quick. Here we go. You ready? Yeah. All right, look. Mr. Ponton, I believe you have a filter turned on in the video settings. You might want to look at that. You're so good. We're trying to, can you hear me, Judge? I can hear you. I think it's a filter. It is and I don't know how to remove it. I've got my assistant here. She's trying to, but I'm prepared to go forward with it. I'm here live. I'm not a cat. I'm not a cat. I can see that. I think if you click the up arrow next to this, yeah, I, so, so, I don't want to get that. That was from the Associated Press. Thank you, Associated Press for throwing that out there. We'll shout out to you guys. But my favorite part, I'm here, I'm ready. I'm not a cat. I love that he clarifies that. Yeah, let's just make sure everybody knows. It could have been a cat lawyer. Yeah. It's like Tootsie's the driving cat. You remember that from the old Saturday Night Live sketch, but now it's lawyer cat, as Lou has said. Right. So why, why is this particularly exciting to you? Why is it exciting to me? Well, what does the cat have to do? What it would, I just love that technology, not only like totally crack. I mean, it worked like it was supposed to in this situation, right? But it totally jumped into a trial. And that is my favorite part. It's like, you know, you got everybody serious. You know that guy's a lawyer. I mean, that guy, whoever a girl, whoever it was, that whose lawyer is supposed to be, is like, what the heck's going on? You're a cat? I'm supposed to win this case, you know what I mean? I know people are supposed to take this seriously. Yeah, yeah. And I absolutely think that is phenomenal. What do you like about it? What do you think? Well, I thought you were gonna lead into, you know, the latest in 3D printing memes that relates to this because I saw something that you tweeted at me earlier. Yes. Well, I thought you meant video takeaway, right? In other words, let me just pull that up too. So this week, just so you guys know, if you haven't been here the last couple of weeks, things has graciously sponsored our streams until the end of this month, at least, and yeah, whatever. And they are doing a $50 gift card to Amazon to a winner, one winner a week, from like three weeks to go all the way to the end of this month. And we are so excited to have things aboard on the stream. You can see their logo on the bottom of the screen there. But Chaos Cortec came through again. They, well, here's what I love about that. They've turned into like the 3D printing memification of, you know, what's the greatest and greatest and this is beautiful. So show us. A hundred percent true story. Let me pop this open on the screen. So check this out. Chaos Cortec on FANGS. We will get you the link. As a matter of fact, it's on my screen. I'm gonna post it right now in the chat. There you go. They have already modeled lawyer cat or cat lawyer and they have a MMU version as well. Check this out. I mean, he looks so disappointed that he's a cat. That was the best part of the eyeballs, like moving around like I was like, how do I turn off the filter? This is great. So what do you think out there if you're watching? Do you think this is funny? I think this is hilarious. I mean, this was just released too, right? I mean, didn't this just come out like this weekend? Yeah, I mean, literally just got released. Let's see, February 14th. So Friday it got released. I'm sorry, yesterday. It was a Valentine's Day gift for everybody. Right, so this is not been shown anywhere else yet that I know of in the 3D printing community. There's been no, it's perfect. There's been no videos yet on this and we have to show it to you because I think this is amazing. Sad lawyer cat. Well, yeah, I don't know. I want to get a good deal on hiring him as your lawyer. I mean, I think this guy's business has probably went through the roof. You think so? Or the other way? Because I'm like, to me, I'm like, come on man, we've been in quarantine forever. People have been using Zoom. I mean, I guess not everybody, but if at this point you haven't figured out how to like log in ahead of time and test, especially ahead of something big like a deposition, like make sure everything's working right ahead of time. I mean, even our silly show, we get on a couple of minutes ahead of time, make sure the mics are working, make sure the cameras are working, you know? I agree, I think we need to reach out and have the team from Chaos Cortech on. What do you think? Oh, Chelsea and Garrett are awesome. We should totally get them on, that would be great. I mean, maybe they'll do character versions of us. I don't even know, I don't even know. I can't wait to see what the next big meme is. And honestly, I think they're onto something really great with this because it transcends just the 3D printing community now and everybody's like, oh my God, that's hilarious, I want that. The funny thing blew up, right? And it's just because people saw it everywhere and it's great, it's bringing in new people, it's fun, it's entertaining and it's great, I love it. Right, now I 100% agree and I love featuring their stuff and I'm so happy that Joanna reached out and said, hey, you gotta put this on. I would have probably not seen it before the show. So thank you if you're watching, Joanna, I'm so glad because I'm printing that, I'm gonna literally, I'm downloading it and I'm gonna print it. I have my, you know what? That could be my first print on this on Wednesday. Well, maybe not, or one of the first, right? Yeah, I like it. But yeah, I got you, I mean, yeah. Gary, what do you think of the 3D modeling meme thing? Ask our personal assistant, Gary. Yeah. I think it's pretty cool. I think, I don't know, I think it would be cooler if it was like a gear face filter, but, you know, that's just me. But you already have a 3D model. Let me, do we have a, we do have a 3D model. Yeah. Yeah. Gary, let me ask you this, do you ever accidentally, like when you're doing your Zooms, do you ever accidentally like have a human filter on and then you can't figure out how to turn it off and, you know. Yeah, typically, typically it looks like a lawyer. Have you seen Better Call Saul? Usually it looks like Saul Goodman. I love it. Perfect. I love it. Hey, you know the best part about Gary's, if he was stuck on, it could be anybody. It literally could be a face of anyone. It really could. Well, you know, while we're talking about things and this and all that, you know, we have the form, the form link is in the description, correct? So we're doing a giveaway at the end of the stream, just like we've done every time. So check out the form link in the description. If you want to enter, it's for a $25 gift card to whatever Amazon is in your vicinity. So it could be Amazon US, it could be Amazon Sweden, it could be Amazon Canada, anywhere that Amazon is, which is pretty much everywhere, right? It's right near ubiquitous at this point. It looks like we only have about 53 entries currently. I'm just looking at it now. So I mean, there's 106 people watching right now and only 53 of you are entered. So make sure you go to that. If you have to go and come back, I totally understand. But go to the link, Nightbot has been throwing it out for forever, but just in case we need to do it one more time, I'll throw it in there so everybody can see it if you're watching on Facebook too. Yeah, I'm so, I am so excited for that. I love Amazon, I love gift cards and thank you so much, thanks for that. And thank you for that amazing lawyer cat model that you're hosting on your site too. Well, all that said, is there any other pressing items that we should jump to before we start doing some hot makes this week? You're prepared to go forward with it? No, I think let's do it. You know what, I loaded a bunch up. What do we do this week? I think we found like 25. We got, and that's not even all of them from what I hear. No, I definitely, there was more, but I know I tried to pick out some good ones and I think I sent them to you. You're gonna run the show today, I love it. That's right, I have the con. Yes. Wait, wait, go back. Is this officially? We're gonna tell you what we think about this and then we're gonna move to the next thing. Oh, sorry, it wasn't time yet. For first, we need a bumper. Take care, can you throw the hot makes bumper up? Rookie ball, I jumped the gun. Okay, play it. Now it's time. Now it's time. All right, first thing this week coming at you from Jasmine, Florentine, we have some paper robots. I had never seen little origami robot like this before, have you, Jim? I'm gonna make it big. No, but I love it. And it moves? It moves, look at this, he's little, he does this. Just like a real octopus, right? I don't know, is that what, I mean, I guess hopefully it's just an ink too, right? That's awesome. I love it, it moves by sound. Is he snapping and making it go in? Is it sound triggered? I'm not picking up the slide. Oh. It's like the clapper for automated octopus, octopi. It gets scared and shrinks up. Yeah, well, that happens. That's like me on a new date. Okay. You going on a lot of dates these days? No, I have no idea. Oh, that was terrible, all right. Oh, all right, moving on. What we got? Oh, the lightspeed, Steven. What's happening? I love it, I love it. You know what, oh, it's scrolled, look at this. Okay, the most expensive 3D-printed speaker box ever, but it's got Bluetooth. Well, this doesn't really talk about the expense, but it was originally the Prusa Boombox. Has anybody in the chat printed this before? That was, was that Steven? Yeah, oh, here we go. Oh, wait, I don't want to get demonetized. Let me kill that. It started playing the music. I mean, it looks pretty cool, right? I mean, I dig the hexagon paneling on it. I hadn't seen this before, but it sounded like it sounded pretty good. Yeah, someone asked, what makes it expensive? Yeah, it's printed in gold PLA, like real gold. No, I don't know. He didn't say, he just said it was expensive. I think if I remember right when he tagged us in it, didn't he say he tried it with like a bunch of different rolls of filament or something? And- It could be, just because he had to iterate a bunch of times. I'm a little hesitant to want to like go too far down the commenting rabbit hole because you never know what you're gonna see. But you know, the hot make, it is hot. I agree. I think it's a cool and it's a practical print. Had to reprint it three times, says the llama. There you go, nice. And those buttons, look how tiny those little buttons look at the time. I love it. I love it. Pretty cool. Hot, hot, hot, hot, hot, hot. Hot, hot, hot, hot, hot. That's it. What do we got next? Moving on. Okay, so this is from Fred or FR3D, the 3D printing. That just ends there. One more model, storage tanks for his modular pipe system. Okay, with some advice from SBNGIR, now allows for stacking them. We'll be available to his Patreons, figurines by hint of the game unit nine. Okay, some interesting modeling. I'm not, again, like it's hard when we don't get the context of the application. Is this from a game, figurines by hint of the game? I don't know. But I like the patina on it, the finish looks fantastic. Probably involves some sanding, which I'm not into, but you know, teach their own. Can you bring it up closer? Like, how's the? Let me see. I'm gonna enhance. Yes. Oh, look at the rust. Yeah, that's a, yeah. Yeah, I can't talk about it. Nice. Tanks. Tanks. Very cool, very cool. Thanks for sharing that, Fred at FR3D. Next from Christy Elson, new one. She loves the contours on the scrappy bit of wood and it reminds her of lines in the sand. Let me see if I can embiggen this one as well. This is like some incredible modeling. I've never had the patience or the steady hand for this type of work, you know? I suck at finishing work. Yeah, broad strokes, we're broad strokes makers, right? That's what I say. But that's so cool. I love the texture on the house and man, that's, I have a fun project coming up and it's a ship, a pretty good sized ship, but I'm a little nervous about finishing it. I don't, yeah, we'll go. Maybe I'll have to like, I'll get a hold of one of these guys that are awesome at finishing something and have them do it for me. Because you know what I'm saying? You got your little dinghies here. I mean, this makes me wonder if it's gonna be like flooded at some point, so these little walnut shells like floating stuff. Oh yeah, that's cool. And it's not, what's not clear to me is like the medium of creation is too. Because it, I'm not seeing anything that looks like obviously 3D printed. So it's not necessarily just that, this could just be some small modeling and obviously the boats, like I said, they look like halves of a walnut shell or something. You know? Yeah, it looks like. It kind of reminds me of a, I don't know, like an old, what a, Chateau or Shack or whatever, you know, like, I don't know. A Chateau and a Shack are very different things. Yeah, they're very different things. You know what I, like, somewhere like off the grid where you have, you gotta get your, you gotta get your walnut, walnut boats and like. Your walnut? Yeah, your walnut boats. Yeah, yeah. I love it. I love it. I like to enjoy a good snow banana in my walnut boat. Snow bananas. We're gonna get the snow bananas later, Gary. Yes. Anyway, that was good to share. Thank you so much for that. Next, the amazing, the, just ever, what's the word I'm looking for? Just consistent, constantly innovating, Matt, mistress of the dye? I don't know. That doesn't sound exactly right, but you get the idea. Steph, for a long time has been doing these resin dye. If you haven't seen her work before, go follow Steph Sharp on Twitter. She does some of the most amazing cast resin work out there. And if you're, especially if you're into D&D or, you know, any of the other dice wielding games, dice craft, I don't know what it is, but, you know, she's got all the different shapes and sizes and stuff like that. This is a, this is a unique one. This is kind of different from, I feel like what we've seen before almost looks like she's got some embedded floral pattern or something in there. What are you seeing? You know, I think when I, is that like a full flower in the one on the left? It says white feathers, pink flowers and sharp. I mean, it looked like a full, like a flower, like a full flower. I don't know. I am amazed every time we see her stuff. Yeah. Yeah. Well, it's cool. And thank you, Zolan for sharing this with us. So I dig it, I dig it. Digging it. Digging it, gigging it, gigging it. Giggity, diggity. That's who I knew. Giggity, giggity. Diggity. From Sammy Hendrick, QBN Flacco. My 3D modeling app experiment with translucent CMYK filaments. Now this is interesting. It looks like we're starting to see like the, we've seen a couple of people mess with, you know, like Jason Proust has done some of that work with the different CMYK in the palette to create kind of the multicolor lithophane. This looks like kind of a similar effect, but using, I guess it's not dithering when it's lines like this, but the translucency as he holds it up, you know, the line shading. What do you call this guys? Help me out in the chat. But are we getting the additive color effect by a different method? We're not using kind of points and dithering, but actually like these individual lines. I, let's see if he says anything about this technique. I think that's awesome. I think it looks cool. It's a very cool looking lithophane, right? I mean, it's not really a lithophane because I don't think you'd have to hold it up, but. Yeah, well, it's definitely, I mean, it's translucent. And so it's definitely working with the light, but what's interesting is it's using this line effect and he goes on to talk about, and Andrew Sink chimes in, that he wants to be able to use the app for playing with a pen plotter as well. So, you know, doing kind of the little line art to create the appearance of different shapes and stuff. So neat. I'd be curious to hear more about it and it'll be interesting to see how this develops. Who's in a name says he calls it above his understanding. Yeah, well, it's, you know, we're all learning, right? Very good. 100% agree, 100% agree. Very good. What do we got? Coming at you next, RAM design, RAM design two. I love this. Not to be confused with RAM design one now, RAM design two. Two. Because, you know, he was frustrated that somebody else had already gotten RAM design. His next big hot makes is just gonna be the studio to do the final print, but this is using solid works and then Ender 5 Pro, Ender 3 Pro, as well as it looks like some resin work here and any cubic mega S and a cube pro trio loves doing custom car models for car owners. He will post the time lapse on the prints in a couple days. So this is just a render at this point, but we're kind of getting to see the whole process as it gets going. So we got, I mean, look at that, right? Hot, hot, hot. What do you think in the crowd? Is that hot or not? Because I think that is hot. I would, I would try that. Will Smith thinks it's hot. Look at the, I like the little stick shift. It's fun. I mean, the Chrome render, so solid works. I haven't done any work with solid works before, but it looks like, you know, some pretty cool looking renders there. And this is, it seems like a unique model. So I'll be interested to see how that, how that works out. RAM design, thank you for sharing. What is next? Seriously, Amazon. This was a, this is a, this is like a micro rant. This was my visual rant. I came home to this the other day while it was raining. I'm like, really? Really? You can't, you can't get it off there. You should expand that. Let, let us all see the glory that was that package in, in your, yeah. It was a nice, it was a nice ASMR, rain effect for the people too. Yeah. Yeah. So that's not hot, right? It's not, it's not. I don't even know who tagged this. But it was a, it was, it was frustrating. So, thank you. This is the opposite of a pooch rant right now. It's a, let's talk about, you know, or it could be a pooch rant. It's, it's, it is a pooch rant. And honestly, sadly, this is not the only time this has happened. It's like, it's just like the failing at the finish, you know, like, and some of the comments I got on this were epic. It was like, you know what? It's just where it landed after they threw it at your house, right? It's not, you know, they tried to chuck it onto the porch and it bounced off your house and back on or something like that. But I think I've been, I've been bitching about it enough on, on, on here from time to time, some of the fails that I've seen that now I think my, my delivery guy's just trolling me. Anyway. He watches. If you're- Yeah, and I did look this up. Here's something interesting. I'll just, I'll just teeter to the two of us for a second. What's interesting about this was I never tagged Amazon on this, but they chimed in. Like they're supported. Oh really? They actually chimed in later on. If you scroll down the feed there. And they said, we're so sorry. That's totally frustrating. But can you verify that it was actually like the Amazon delivery and not UPSO? In defense to Amazon, this time it was actually UPS. Nice. You know, you never know what you're gonna get. So there's a little micro rant injected in there for you for, for right now. So if your pooch is Amazon or UPS guy, right? If you're watching this, show us you're watching this next time, place it upside down in the gutter. Like, you know. On the roof. It's like- Yeah, yeah, yeah. It will know. It will know if they're really watching. It's like, boy, yeah. Better off dead or just throwin' stuff in. The reason they found you is the tweet was actually picked up by my sister AI. That works in Amazon. I suspect you're right, Yuri. I'm sure Amazon has some AI that just searches for Amazon and, you know, feeds it off so the customer support can be proactive. So I mean, I guess that's a good thing, right? It wasn't Alexa, actually. It was a lesser known Amanda. Oh, okay. Your sister. Yeah, your sister. Amanda. Amanda. I love it. Thank you for that. Coming up next. 3D print page. Amanda's the stepsister of Alexa. Right. The redheaded step child. Yeah, yeah. 3D print page thought he'd experiment by adding some sound and a few optic fibers. So do we have to turn on some sound for this one? You guys ready? I'm gonna blow it up big. Give it a listen. Oh, it's got the- I'll trust you. It's pretty quiet. Yeah. I can hear it though. It's like that, do-do-do. Nice. That's a sweet diorama, though. It is. I love, you know, it's got some LEDs in it. Like the finishing on it's fantastic. Oh, we get a little peak behind the- behind the scenes. There you go. Now you can hear it. Nice. So good. Man, if you have not seen the Mandalorian yet. Yeah. You really gotta check it out. It's pretty, pretty great. Even if you're not a super big Star Wars person. But that was neat. You know what would be cool is if it had that, you know that eyeball? I love that eyeball thing that pops out. Anyway, we lost him. We're moving on to the next series. I was- It got me left us. It was a very sneaky way to get up and run next door real quick. And then someone put me back on the screen. So I got busted. No hiding. Yeah, but I mean, you were just talking about the Mandalorian. No hiding. You were talking about the Mandalorian. And what you got. Let's get in big on that. Ooh, you got some Beskar. Nice. Darksaber proof. That's cool, man. So if you watch Tested, Adam Savage did a weathering on his piece that looks like this. And I think it might have to do the same thing because it looks amazing. But I got that. I found that on, when he did his video, I was one of the lucky first few people that jumped on it before they sold out very quickly. But yeah, I got some Beskar. Yeah. I just, look at the finish on that. It's cool. It's got kind of like that Damascus. Right. Yeah. Now I do have a friend and he might be watching Steve. His name is Steve. He has a cold Damascus piece of Beskar. And there's someone out there making him out of Damascus. And it is heavy and it looks amazing. So yeah. Michael Castles says he hasn't seen Mandalorian yet. He hasn't seen Mandalorian yet. He needs to. Yeah. I didn't mean to jump in there like that. I know we were in the middle of hot makes, but I had to show you that. That's a hot make right there. That is hot. I liked it. I liked it. Very cool. All right. All right. Back to back. And meanwhile, back to the man. From the people who brought us the Snow Banana. Exactly. The good people that brought us the Snow Banana. Ludwig. I don't know. I'm not going to give a shot. Well, should I give his last name a shot? Grief? Maybe? Grief? Anyway, 3D, 3D RCNC kind of up and coming. He did the Snow Mobile that we showed off last week. The Death Lobster at night, if you recall, where we were saying we weren't sure how big it was. And then later on, he posted it with the Snow Banana for scale. But this is his latest edition. We got the big paddle front wheels on this guy. And so this is interesting. We don't have any video on this one. We have a good question here from Nick about whether or not it could drive on water. So it looks like we need some more video from you, Ludwig. But we're eager to see how the little paddles perform there. But I don't see a banana here. No banana again. No banana. No banana or otherwise. We're going to need to talk to you because only bananas from now on. Only pulling clothes on that one. That is hot. Yeah, I mean, he's got some thought to the scoops on this thing. I love it. I guess it's front wheel drive. Or maybe he just hasn't put it on the back yet. I don't know. Or maybe you only need what we just haven't gotten the video. So Shane says there is a video of it. We just haven't gotten that link yet. So maybe we'll have to do a follow on of that. But I'm wondering with the paddles, tell us in the chat if you know, is it just to help the steering? Maybe they aren't the drive wheels, but in order to steer, you need those for the grip. Give me the, give me the dynamics of the whole thing. Yeah. Moving on. Tiny girl from Elise. Porcelain. This might be my pick of the week. You think so? Is this your pick? I think so. I'm going to get it big. Enhance. Yeah. There she is. Okay. Wow. Now, okay. Who can tell me what is this from a, is this from like an anime series, a game? Is this a specific cosplay? Is this her own design? What do we know? What do we know? She just says tiny girl plus big pink weapon. Here it is with a cat. I am, I am. Oh, this is, she uses a cat for scale. Yeah. But see the problem with using live animal, I have no idea how big that cat is. That could be a huge cat. It could be. Look at this. It could be monster. This could be like a Jaguar sized cat. Right. But I had a very large room. But if you show her, it shows like how big it really is. If you scroll down, I think actually too. Scroll. If you go back to the original post and scroll down, she has some pictures of how big it is. There you go. Yeah. Right there. Yeah. But she says, look at this, new followers. She's got a bunch of, so we did, we featured I believe the top left ones here a couple of weeks ago. Right. Right. And then I don't remember seeing these crossbows, but it looks like she's been quite busy. Here's somebody that would really benefit from ACR 30, I believe. What do you think? I was just thinking, man, I wonder if she's using one already. But if not, that's phenomenal. Maybe she is. I mean, some of these look like she's obviously got them segmented. And I can see some seams here. Yeah. But to need artistic effect. I mean, this one down in the bottom center here looks like it's massive that she had to piece it together. You know, I wonder what she, you think she's glooping? You think she's just a gloop or just a CA glue? But anyway, it looks like very creative stuff from Elise. Real quick. Nice work. Phenomenal stuff. I love the color too. I'm gonna like and I'm gonna follow her and she is from Canada, it looks like. Another, so another amazing contribution from the great white, our friends in the great white north, thank you. Yeah, I got something to throw in there real quick, okay. Toss it in. Here you go. Just toss it in. Check this out. Oh, you got the video, okay. Yes. That thing's ripping through the snow. It really is, man. It looks like it handles pretty dang well. Yeah, whoa. Got a little squirrely there, but that's kind of the part of the fun. So there's a video. You said you wish there's a video and users or users, viewers obliged and we got the link from Geary and there you go. See, that's the beauty of this show, Jim. It's like, we have not only our amazing digital assistant, we have each other, but we have an army of makers who have our back, right? That's true. Yeah. So thank you guys. From Blasto, the one of the kings of the cyber deck community, right? He's got the metal, the M3TAL, metal cyber deck, is finished. I'm gonna get big. We're going big. Enhance. Yes, I was just looking at a date here. I think it's the 27th. Yes, Cyber Deck Con or Cyber Cafe, I think it's called Saturday, I believe the 27th and I'll be a part of that. Are you gonna be a part of that too? Yeah, yeah, I'll be there. Nice. Yeah, we'll be there. It's gonna be awesome. You know, I'm learning and I'm just a fan of the builds. I love just looking at the attention to detail, the creativity. I wonder if I could crank one out in one shot on the CR30. Just like here, I printed a quick side of it. Like the bottom case, like, you know. You have keyboard and everything. It'd be like the longest, skinniest cyber deck ever. That might be an interesting challenge because you could have the fold up. So if you made it a printed place, like the screen folds up and then the keyboard and then, you know, any additional control box is behind it or something, you know. I'm gonna try it when we get the challenge going. Throne down, look at this. I'll bet you that keyboard looks like a really clicky, clicky clicky. Ah, I love it. I wanna see Blasto next time you post to a video. I need some good audio of the kchink when you like hit those keys. Looks like a good mechanical, maybe, I don't know. The Virtua Cyber Deck Cafe is watching. I believe that's Joe. He said the Virtuscope can be printed in one shot. And also Blasto did say Cyber Deck VirtuCon, or VirtCon, February 27th, whoop, I'm pumped for it. Yeah, if you're interested in learning more about Cyber Decks, building Cyber Decks, being cool Cyber Decks, VirtCon. Let's grab a link, Geary, if you got time, can you grab a link for the Cyber Deck VirtCon and let's toss it in so everybody can check it out. Put it in the card. Just give me a second. Thank you, Geary. Very cool. Thank you for sharing that. I wonder if Geary will be part of it. I wonder if Geary will be part of it. He's virtual. He is virtual. Look at this, man. This looks delicious. You don't like it being primed if I wasn't. Abby Brown is added again. Abby Math, teacher. First of all, I don't know how she knew that I like Neapolitan ice cream, but ice cream sandwiches even. It's like ice cream sando. Man, it's a practical box too. I just want to eat it. It looks delicious. What do you think? Yes. And I like that she's just got, she made a little gift of it even. I can't, unfortunately, I can't blow it up. I'm trying so hard to eat good and this weekend didn't help because we had like a heart-shaped pizza this weekend, but I love pizza too. That's the problem, but this does not help me. If I had these sitting around with stuff in them, I would be dying for ice cream sandwiches all day. Look what she's got here. Okay, so scrolling down, she's got her palette geared up. I'm seeing some Proos cement and some other good color choices. Right, looks like multiple shades of brown are harder to come by sometime too. So she got the dark and the... We are missing the banana for scale again, someone noted. Yeah, but look at that. Even the purge block looks delicious there, right? Oh yeah. There it is, look at this. Look at how happy these are. Thank you for sharing that, Abby. Abby's model is available on Colt's 3D. Looks like right here, if you want to support Abby and her work, it looks like $3 is all it takes to get your ice cream sandwich, pencil holder, pertinence case. So very nice. And I'm just posting now the link for VertCon. You can go and sign up through that link, it's virtual, you'll see me, you'll see Pooche, you'll see everybody. Pooche, that's like the French pronunciation. It's a Pooche. Le Pooche. Le Pooche, yeah. All right, what do we got next? We have a lot left, don't we? There's about 10 left, so how are we on time? We got about 10 minutes, we'll get through this, we'll get our drawing out and we'll call it a night. Coming from WarCocky, look at this. Look at this beautiful, thick, ropey, glowy extrusion with a 7.0 millimeter nozzle, I guess, I don't know, this is a neat print though, I like it and he's got the LEDs in there. That's a great display piece, Chris. I absolutely love that. I need to get that model and print it. This is his custom SKR Caraboo 3D 320. He made it into a lamp. It needs some work to be easier for FDM. He might try to make his own, but if he wants to try, he's got it on Colts as well. Let's see what that'll set you back on Colts. $4.55, you know, I haven't posted anything on Colts before, but why do you suppose it's the random change numbers? Is there something about, is that like, just when people pick or, huh? Maybe. If you know, tell me in the chat, what's up with the pricing in Colts? Yeah. Anyway, there's where to get it. Very neat, very neat, Chris, well done. And just so everybody knows, it looks like there's gonna be a design competition during the Cyberdeck VertCon, and the winner gets a 3D printer. So, that's phenomenal. That is phenomenal. What a deal, man. What kind of, can you say what kind of 3D printer? I don't know that it matters. I mean, that's a cool prize, no matter what. It could be a Tico. Says it's gonna be a Voxelab Proxima monochrome resin printer. Ooh, resin even, very nice. Look, speaking of resin, it's a T-shirt design competition. Oh, nice. Back, look at this, Steph doubling up two times on the same hot days. That's hot, hot, hot, double hot. Every day is a surprise, look at this. We got a nice little galaxy kind of finish, you know? It's like what I see when I look into your eyes, Jim. Darkness. Darkness and angsty. I love it. I need to try this. I see evidently. I suppose you haven't done any of the rest of it. I think it's like this too, and they just did a space bar, you know? And I really love their stuff, but they did, yeah. Everything came with a space bar. Utility, or do you mean like a cantina in Star Wars? Like a keyboard utility. Oh, I see, okay, very good. Very good. All right, we're marching on again. We gotta finish plowing through here. I got eight left here. All right. We got a lot of love this week. A lot of love, because it's Valentine's week. Willow added again. Yes. It looks creative. Unfortunately, we got word that she's sleeping now, because she's in, where's she in Norway? Holland, she's somewhere where it's nighttime right now. But teeth are painted, and everything is now permanently installed. Let's make this big, like this, look at this. I would not want to encounter that in a Dark Woods. I love the eyeballs. I love everything about this. Look at that. Yeah, you get the, the, I don't know what you need. I love it. So, so a little bit of a teaser. I've been in contact. Tease me. And, and she's sleeping during our show normally. She lives in an area that is nighttime right now. Area that is nighttime right now, yes. But, yeah, yeah, seven hours ahead of us. But, but stay tuned. You never know what's going to pop up soon. Oh, Nerdy J is working, working some magic. Maybe we'll have Willow on. Who knows? That would be a good guess. I'm still pumping. That, that's amazing, the stuff she's doing. Oh, always, she's nonstop. Some of the, and just consistently too, right? You know, like her cosplay stuff is just fantastic. Okay, what do we got next? Let's get in here with this. Yuka. Seven. Keija design. Kiaia, I apologize if I slaughtered that. We got some resin work. Yuna, now resin printed. Now look at this, Jim. Let's get big. Let's get big. Let's get crazy. What do you think of that? Now, is this alcohol inks? Is that how we're doing this? Ah, I don't know, but. Where are my resin people at? What are they gonna say? I mean, I'm seeing a lot of that translucency, you know? Nice. And as I remember, you know, hearing, I don't do resin work. That's gorgeous. It is fantastic. Look at that. What do you think? What do you think? Gorgeous. Pretty colors, pretty colors. And a hand for scale. A hand for scale. Thumbnail. Thumb for scale. Yeah, sure. There's a thumbnail there. This was done on the Elegoo official Mars, the Elegoo Mars with no supports and with alcohol inks. See, look, I slid it before I even read it. So Andrew Sink's comment, I can't imagine how intricate the process of applying that ink is. You did a great job. He says it's been a bit of trial and error. So if you've done alcohol ink, we've got resin people in the chat, you know? Tell us, you know, is it as hard as it looks? It looks pretty hard. Looks pretty hard, for sure. And a quick shout out before we get to the rest of these hotmakes, if you have not registered to win the $50 gift card from Amazon, this is your last chance to register. As soon as we are done with hotmakes for drawing that, I'm not gonna give any warning. I'm just gonna say we're doing it. So this is your warning. If you have not registered, go do it now. Jim runs a tight ship. We're going right into it, right into it. Last warning, go enter now if you wanna win the $25 gift card from Thangs.com. 50, 50. Oh, it's a 50? 50. It's always been 50? Where did I get that from? My apologies. Thank you, Miss Thang. Thank you, Thangs, for the $50 gift card. It's been every week. I apologize for trying to shortchange you there and keeping the 25 extra myself. I've been outed on the stream. Anyway, Jordan, let's go. Let's do it. Look at this, Jordan Moss. I don't know if you saw, but Jordan was, and I apologize if I'm not pronouncing that, is it Jorvan? Jordan, I don't know. I apologize if I didn't get it right, but congrats, first of all, for making the cover of Make Magazine this month. I don't know if you saw that, but he was on the cover and, oh, I clicked. I clicked in. This is his Parado Asi wearable steampunk style spider, and there is an Instructables right here. Yes. On how to do it with what you need, what microserver, servos you need, the power booster, the trinkets, all this stuff from Adafruit. Look at all these pieces. So let me know if you're interested in doing a build. If you do a build, make sure you tag it, and we'll do some follow-up, but this is a really awesome contribution. Obviously, he's a fan of the Gloop, who isn't, because the Gloop is where it's at. Gloop, there it is. You know what I mean? Someone said I didn't realize the magazine was published again. I don't know if it's published, but it's virtual, right? It is virtual, but he actually did get a print copy. There was a picture of him holding it up. So I don't know if that was something that was done special for him, or what, but it's a big honor, obviously, to be whether it's on the online version of the webzine, or if there's a print version. He is a remarkably talent. I believe he's up in the Pacific Northwest, up in Joel's neck of the woods. I know Paki has mentioned him. He's up in the Pacific Northwest. There's a lot of really cool robotics people up there, and I mean, this thing is incredibly detailed, and I just, like, this is fantastic, and there's a picture of him with it right there. Very cool. Very cool, and thank you for sharing that with the community. Jorvan, if I'm saying that wrong again, I'm so sorry. So, very cool. That's a neat build. I hope some people jump on there and put some of those together. That'd be a fun intro into robotics. Travel by fire, right? Okay, I'm in right along, because we're already out of time. I got four of us. Oh, you're good. Greg's maker corner. Greg kicked in earlier. Thank you for the contribution. He's showing off his mini. He's flexing on you right here. Nerdy J with his mini already put together. Look at that, and look at these colors, man. This is fantastic. I think he's showing off the camera. He said he built, right? It's exactly right. So this was the project in the last Alien Slacker box. So if you haven't checked out Josh over at Alien 3D, he does a monthly subscription. This was a really great one from this last month for the camera, very practical print to have, obviously. This is for the ESP32 webcam. And he says it works great on the Prusa Mini. So look at that. If I can make it a little bit bigger for you. Very cool. Loving it. Greg, thank you for sharing that. I love that green too. I mean, I love that. That's the ooze, baby. Yeah, the ooze. The alien ooze. Yeah. Juan Garcia. He cannot contain how pleased he is with himself for how this knife turned out. We got some knife smithing coming up. Now, we talked about, I think Sean Renna, Renna Knives has been really big. He's been doing a lot of work. Looks like Juan's doing some knife smithing as well here. Look at the size of that blade, huh? Not quite finished, but he's got to do some heat treating. There's probably a lot more to this. I haven't put a knife together myself before, but I got to imagine there's a lot more to this than we might expect, you know? Yeah, I love it. That is legitimately, literally red hot. Hot, baby. I look like an origin fire, and I've watched a bajillion episodes of that, and this is awesome. I have a friend that's about a block and a half away who built a forge recently, so I'm hoping to get over there and play with it. Yeah, play with it, play with it. Juan, fantastic, please follow up, tag it so we can see how this final build ends up. Hannah, Hannah from the UK, Hannah is probably not awake still. She said, you know, she was with us last week, but you know, I haven't seen her this week. She's super excited. We finally share this awesome project that her and the boy have been collaborating on. The boy. Which boy, but maybe her boy or- Her day boy, yeah. Her boy toy, I don't know. T-squares, squarosaurus rex. T-squarosaurus rex. The first run of four designs is now available, so it is, these are dyno tools. Dyno tools. Dyno, dyno might. Dyno might. So we've got the T-squarosaurus rex. We've got the parasol, parasoddler self, ah, that's so hard to say. Parasoddler, soddler suffice, hello. The drilophosaurus, okay. There's, look how happy he is sporting his drilophosaurus. Sure, drilophosaurus, drilophosaurus. And the spannersaurus, which we all know is what we affectionately call colloquially here in the USA wrench. Is a spanner. And the rest of the rest of the world. Oh wait, and there's another one. Five, oh, this is the T-squarosaurus coaster. I'm from Jesse's, loving the tongue twisters. Yeah, yeah. I gave it the old college try for you there, Clayton. Oh man, here we go. It wouldn't be a hot mix if we didn't have graffiti on here, right? Right. More resin, looks like some more, maybe some alcohol inks. Dragon Slayer, sculpted by Clay, Claydemon. I hadn't heard of Claydemon before. This is a new sculptor maybe. It looks like he's new to Twitter. So, maybe check him out. Resin printing, glass like 3D printing. We've got glass, dragon Slayer. What, look at that. Oof, got a dragon, dragon dome, dragon head. The detail. I don't know. Look at that detail. Love it. Fantastic. Thank you, Grafite. As always, amazing work. Great pictures, too. Fantastic pictures. That's part of the, you know, any battle. Neil 3D prints at it again with his little cities. It's like every week, we just see another little. Yeah. Reminds me of Settlers of Catan a little bit with the little hexagons. Yeah, this might be one of my favorite stuff. This is, you think of this year, this is Jim's pick of the week? Right here? I don't know if my pick of the week, but I really like this city. I love how it's put together. It looks phenomenal together. It really looks like my son would sit down and play with it, you know? Yeah, absolutely it would. And are these, so what's the availability of these guys? Where can people find them if they wanna do these cities? They do look like, it reminds me of like LEGO cities or any number of the Brio style stuff. You remember the train cities and stuff from the old days and they still have them as well. So great city printed one. I forget, I know he's shared before us. Uncle Jesse says Patreon. You can get it from Patreon. Yeah, check out N Hengist on Patreon. If you're interested in supporting Neil here. Very cool. Thank you, Clayton. Yeah, speak, who's that? You mean Uncle Jesse? We don't know who Clayton is. Uncle Jesse, yeah, Clayton's his birth name. That's what his mom calls him. Oh boy. So speaking of him, he put the, what is it? The Neptune 2, we put out a video on. A great video by the way. I don't know if you were surprised to get yours, but mine just showed up at the door. I didn't even know it was coming. And it's sitting in a box right there. I haven't done anything with it. You're a much better person than I am for getting it out of the box and putting it together. Well, he's super big on his resident work. I mean, he's printing all the time. But as you are as well too, but fantastic, man. I can't wait to see. What he produces without. Look at these, man. This I love. This is up your alley right here with the engraving, right? So slate tiles. I might have to do this. Let's go big. You should do this, dude. Slate is where it's at, right? Yeah. Yeah. So he's got his raspberry pie slate tile. We've got. That's awesome. And they're all chips. And the best part about them being chips is the slate makes them look perfect, you know? Yeah. And then my favorite, which was in this one right here below it is the 486 DX2. That was a couple computers in when I was doing more system building and stuff. But I absolutely had one of those with math coprocessor. Actually, I can't remember if that's the point where they started integrating the coprocessor or not. Somebody's going to correct me. How much slate tiles are? The slate tiles, Uncle Jesse said how much. And they're super cheap. You can get a pack of four for, I don't even know, three or five bucks or something at Walmart. So they're really cheap. And once you dial in one, you always want to use one as a test tile, right? Just to get dialed in. But once you dial them in, they're really easy to burn, too. You know, what I love about this is he's got a really great theme going here. And I can see a really, for not a lot of investment to do these, you've got a really nice high end piece of wall art that a lot of people, especially in Silicon Valley, you know, where I'm from originally, I can see a lot of people wanting to like line their walls with these, just a full display. Or coasters, just throw some cork and add some cork that you can throw on the bottom of those and just use them as coasters, you know? I mean, coasters are cool too, but I like to think about things where that would actually like take more pride to display. So it's like, yeah, I guess it just depends on what your motif is. It would be pretty sweet like in a grid on a wall. That's what I'm saying, you know? Like as I actually like, you know, display piece. So very cool, very nicely done, very creative idea, Jason. Thank you for sharing that. I don't know if it was him that hot-mixed it or somebody further down, but whoever did, that was a really great, oh yeah, and there's people suggesting, I mean, there's probably just an infinite amount of chips that could be made out of those, right? That, I think this, I'm with you. This might be one of my favorite for the week. I think my next, oh, oh, oh, I spoke too soon. I spoke too soon. I think my next blazer video, I'm gonna do a video on those. We're gonna do it. Okay, wait, here's for the grand finale. Yes, grand finale. Big it. Yes. It's just, look at this. Wait, this isn't how you get your food? This is what I want my microwave to like always do. I wanted to just like, your food is ready and then it's like disco party, right? You know, spinning around. I mean, just look, oh yeah, how crazy is this? For no other reason than just to have a good display and the little lights pop up. Yeah. I mean, come on. Somebody, that is a labor of love right there. Control that. That's how Jesse eats every night. Yeah. Yeah. Yeah. Just look at the mechanics of this whole thing. I love it. You know what? Yeah. I feel like you need some house music. Yeah. Shh, shh, shh, shh, shh, shh, shh. Right? So good. Thank you. Here you go. Thank you, Gary. Oh boy. Now, what is this bowl? He doesn't say, but you could eat ramen this way, soups, you know, whatever. That's just, that's the only way to eat right there. Anyway. Everyone says share the name of this thing. I don't even know what the name is. I think it was in Japanese originally or Korean. I apologize. I don't know what this says, but. New use for your old stepper motors. Yes. I would absolutely put this in my office, Brandon. Thank you for the share. We appreciate it. We don't know what it's called, but I guess we could drill in and then we need translations. So it says, this is today's dinner. Ha ha ha. Anyway. All right. That's hot makes for this week. So hey, if you guys, if you guys see hot stuff, don't forget, tag it, hashtag hot makes. Hashtag. Hashtag. And maybe you'll see it here on the coming episodes. All right, what do we got here? I think it's time to spin. We're going right in, right? We're already late. Yep, I'm doing it. I'm doing it. I'm currently copying and pasting the names. We're going to do the spin for $50 from Amazon, from FANGS. Thank you so much, FANGS. If we can get the FANGS banner on the bottom one more time. One more time. We're going to celebrate. All right, here we go. Spin. Dot. Will. 104 entries. And Sweet Bee. Sweet Bee 52. Yes. Congrats. She's a long time watcher, and we appreciate that you're here. I know it is late for you, if I remember right. But congratulations. We'll get you the $50 gift card coming. You'll actually get an email straight from FANGS. So check that out. And I'll get her your information as soon as we're done. Congratulations. There she is. Thanks, guys. There she is right there. Proof. I saw her chatting already. Thank you. That's awesome. Before we go, let me just see. I want to make sure I got this right. So we had a person earlier ask us a question via email. Oh, that's kind of true. We take your questions via email. Yeah, yeah. You don't have to post it. Thank you for your patience. It's not easy to run this in real time, is it, Jim? No, not at all. I appreciate you taking over. I like sitting back once, hanging out. Was it good? Was it good for you? Yeah, good job. Good. I'm glad to hear that. It allowed me a different perspective, and I really enjoyed it. Congratulations on your new job. Happy to do it, bud, any time. No, I love it. So I just want to make sure I had this link ready to go. So the Tech With Hudson sent us an email question, and I just wanted to put it out. It sounds like there's a 13-year-old that has a channel on YouTube, and he wanted to know if we would check it out. So here's the deal. Everybody, there's the link. Go check out the channel. Tech With Hudson, hopefully a couple people, will check out your channel. But I suggest everybody. It looks like you had a Lulzbot. I think you can test six on the channel. So that's awesome. Check it out after the stream. I'm going to test six. What the heck? So as you got Hudson, I just posted the link in the chat. Check out the channel. Give the guy some love. He's 13 years old, and rocking it out with a 3D printing. So nice work. Other than that, I think we gots to get going. We're about 15 minutes late. I know there's more streams after this. If you're the one streaming after this, throw it in the chat, let us know. I know it bounces around between a few people. Where's the after party? Yeah, don't forget if you're brand new, always tag us on Twitter. Soon to be Instagram. We're working out the bugs right now. Hashtag, hashtag, hot makes. Hit us up on Twitter, Soon Instagram. People are already tagging us on Instagram, which is amazing. There's a bunch of stuff out there. We're going to have a time blog. But hashtag hot makes. We'll get it on here on the show. And check it out. Anything else? Yeah, Sean, he's right. It's a balmy 62 degrees in the house here. And I ran in and didn't even take off my jacket because I was not dedicated to being on time for the stream today. I'm actually pretty hot right now. But it's been good hanging with you guys. Thank you, as always. Congratulations for a winner. Thank you to Thanks for sponsoring the stream. And we will see you guys next week. We'll see you guys later. Have a great week, everybody. We'll see you next week. Later. Should we just do this? Shh, shh, shh, shh, shh. You got the bumper music? Like. Oh. Oh. Oh. Oh. Oh. Oh. Oh. Oh. Oh.