 Shea Bear 1000 here Today we've got this fluorescent light one of the bulbs is working Now I know both bulbs are good this bulb into that one and it works So let's take this thing apart And see if we can fix it Because we've got two more sets here. I think out of three we should be able to get at least one good set, right? Stick with me and let's do this together passenger, but I believe up inside here on each end There's one one that One that operates one side and on the other end it operates the other There's these little clips here that we're going to have to Try to take these out and get this cap off of here, and let's see what's inside there Let me get the bulbs out Okay, so the cords on the left hand side here So the one farthest away from us that'll be the good one. So let's Let's start and let's take this one off of here This cap off and let's see what we're what we're looking at if you hear something running in the background It's my little heater. It's pretty cold in the garage today. So I Lost the camera Okay, so anyway, let's uh So that's that up selling stuff for three days. So anyway, I did pretty good yesterday for being a Monday I made $8 so Alright guys, let me get you on the stand and let's see what we can do with this thing Okay, so it looks like we've got four of these little tabs We're going to try to Try to get these tabs Unclipped now. I'm not sure how I'm going to do this But let me back you out a little bit. It can be tricky Now I've never had I know anything to do with tabs Can be tricky I may not even be doing it right so I'm not sure And then uh, I'll kick you back on since I figure out how them come out Taking part because you're not supposed to repair these but shape our 1000 We're gonna we're gonna try to fix it. So Let me see if I can get this part and then I'll show you how I Now before I take this part, I want to show you something down here See how nice that is nice and flat and clean well somewhat clean Now on this side and you see that I'm guessing whatever the issue is is underneath this So I got to figure out how to get this off. Let's underneath that So let me do that and then I'll so I got it out and yes, you got then is these clips That makes it tight And you got one on each side there Holds that in they're painting ass, but you can get them to come out now this looks like this thing here Looks like we need to take that out. It looks like it's been hot And that being hot like that. I'm guessing is The reason this is not working. I'm gonna try to pull this out into this white wire So all I'm going to do is I'm going to clip that so I'm going to clip this right here Like I said, I'm just guessing I could be taking the wrong one out one out of the other one the same way I did this one But like I said, the only these clips So just work with them clips and you can get them out now. I don't recommend doing this. This is not really how to It's just what I am doing To try to make a couple lights work. I mean, they're just soldered on From the factory just the same way. I'm going to put them back. Let me grab a pair of plush The reason why it's not coming out real easy Is because that plastic is melted Let me get you that's why it's not wanting to come out. Hey, this is the issue here off of one of the other lights stuff down in here And we'll get it soldered back on I've got my soldering iron over there heating up and we should be good to go So let me get the other one out as soon as I get the other one out We'll commence to soldering the new one in well, it's not new but the good We'll go from there now this light as you can see remember they used to have a big black box in here That was called your ballast now I'm not sure if they still call this a ballast or if this is a Passenger, but I'm guessing it takes the place of the ballast So that way you don't need a starter. Remember the little silver Things you could put in and turn them and they were started like that anymore So let me get the other one out and we'll go from there. Here's The good one out of one of the other Lights had to change the tip on this thing because my other tip was like It's the tip itself like melted or something. I don't know Let's see if we can use this tip get some of this old solder off of here I was hoping maybe I could use some of it But sure came out a lot harder than that didn't light this up on there like that Remember it was this one that wasn't working enough to work and then when I walk away one of them's going to fall out I've got to plug here. I won't plug it in if we fixed it. This is a bad ball So let me change Let me change the ball. It might be a faulty ball. Put some heat on them. They'll kick on I'm going to clean it up I'm going to move this light and I'm going to turn it long ways like this And I'll probably put it over here This one here one of the ones Because I had okay. So now I've got this one over here So I'm just going to clean that wall off of all the spider webs And I'm going to put it turning down onto my bench here. So That'll be cool. I'll have plenty of light boy this camera You guys seeing that how it's like turning yellow I don't I suppose my camera's screwing up now Because it ain't doing it on the other one. It's because of the light. But anyway, there you go. We fixed it So that's how you fix one of these lights Never done it before but I figured what the hell There can't be that much wrong with them. And when I seen that melting part I knew there was something in there that wasn't right. Now we get get to go figure out what's wrong with that I won't take take you with me because it's cold outside It's only like 68 or 69 No, 58 or 59 Okay, and I'll figure out what's going on with that camera. I'll take another camera out Plug it in and if it's the cables, it's going to suck because remember when I had to get up in the attic and curl back in that hole That'll suck But anyway, I'll just have to see what's wrong with it So thanks for watching guys. I appreciate it. Shea bear the myth the man a legend I'll show you after I get the lights hung the way I want I may do that Today and I'll show you what it looks like when I'm all done with that. Okay. All right guys. So here we go the light switch I'll flip the light switch on that one. I'm going to do away with it. I'll probably put another One right there and I put this one's a little brighter It looks like to me than this one though. It's a low lower wattage That's okay because she can do her laundry there. So I just appreciate it. Bye. Bye. Y'all take care