 Hi, my name is Arusha Gupta. I work for ST Microelectronics as a field applications engineer under audio. I'm based in the Livonia office. Here we have the power amplifier demo, which has two of our parts, the FDA 901 and the 903. These are only two of our power amplifiers out of our vast majority. I wanted to talk about the things that differentiate us from our competitors. We have the feedback after filter, which guarantees accurate characteristics across the load, such as current readings and voltage readings. We also have a great variety of diagnostics. This includes short to VCC in ground, open load detection, offset on the input and the output to ensure that we are getting a correct signal from the microcontroller, and current sensing and digital impedance meter. The last two I would like to talk about some more. These two diagnostics tell you exactly what is going on with the speaker. As the speaker starts to deteriorate over time, it will change in resistance or impedance. It will change in impedance, and the part will be able to monitor this change. After a couple of years, if you've ever noticed that your speaker will start to sound tinny, the customer can actually take this data and implement a solution which will make the really old, let's say three, four, ten-year-old speaker sound brand new, high definition. I would actually like to show that on our power amplifier demo. So these speakers right here are paper speakers. Speakers are made out of paper, Kevlar, fiberglass, wood, those are also high end speakers. So with the speakers that we have in our power amplifier, we can make our system sound like a high definition system. For more information, please go to ST.com or you can contact your sales representative. Thank you. Have a good day.