 Hi, I'm Mr. T with R-Valment and here I will introduce the Ultrahorn, a high gain point-to-point or narrow sector horn antenna designed for 5GHz unlicensed bands. Ultrahorn solves the biggest issues in the unlicensed bands, that of RF noise, system loss and network scalability. Ultrahorn comes assembled out of the box and all you need to install the antenna is a 13mm wrench. Ultrahorn has 24 dbi gain, 15 degrees beam width and the following features make it an ideal point-to-point or narrow sector antenna in the unlicensed 5GHz band. The radiation pattern of Ultrahorn is symmetrical with the same beam width in the azimuth and elevation cuts. Ultrahorn is the ultimate antenna in terms of noise rejection. There is only one main lobe and zero side lobes and its beam efficiency is 99%, which is a unique feature unmatched by any other point-to-point or sector antenna in the wireless industry. If you want to know more about beam efficiency, check our short video through the link in the corner or in the video description. The maximum gain is stable over the whole useful bandwidth, so the signal strength is constant regardless of the frequency channel used. Also the rest of the radiation pattern is stable over the whole useful bandwidth, providing high coverage stability and reliability, especially for the CPEs at the edges of the sector. The horizontal and vertical radiation patterns are identical, which is yet another addition to the reliability of the Ultrahorn performance on both radio chains. Ultrahorn features twist port, our proprietary waveguide connector that minimizes the RF power loss occurring between a radio and the antenna. Thanks to these favorable properties, you can collocate many Ultrahorns even on a crowded tower without any degradation of links already in place. All of that with no additional cost for aftermarket shielding kits thanks to the 99% beam efficiency and narrow beam width. The side-lobe connection typical for parabolic dishes when you see a decent signal strength is extremely easy to avoid with Ultrahorn. One main lobe and zero side-lobes leave no space for error. There is only one azimuth angle with the maximum signal that clearly indicates correct alignment. So is Ultrahorn a point-to-point or a sector antenna? It depends on the scenario. Ultrahorn is an excellent point-to-point antenna if it fits your need, as well as a narrow sector antenna, for example, with customers clustered close to each other far from the tower. Thanks to the larger elevation beam width, Ultrahorn easily covers the knell zone at the site and the coverage is reliable in flat to somewhat hilly landscapes. In mountainous regions, the wide downhill range helps you aim the spotlight at the cluster of the clients. Twisport, our proprietary WeaveGa connector with near-zero loss, connects and mounts the radio within seconds. Twisport ecosystem makes migration to other radio platforms easier and economical. Simply change the adapter to fit the new radio and you're good to go. Ultrahorn weighs 8.2 kg and its body has a beautiful matte finish. It will withstand extreme environmental conditions. It is built from premium materials. Extruded aluminium, UV-resistant plastic and stainless steel hardware, with a black-colored surface coating protecting the bolts from seizing and extending the durability of the whole bracket. And at the bottom of the antenna are two water drain holes, so any condensed water simply leaks out. There is absolutely no assembly involved. Ultrahorn comes pre-assembled from the factory. Our innovative Ultrahorn bracket, which is part of the package, is optimized for durability and easy installation. Before you attach the bracket arm on the tower, it is useful to know the thickness of the pole. If its diameter is larger than 58 mm, flip the bracket for the best attachment. The four M8 bolts ensure robust and durable attachment. Once the antenna is up and aimed in the right direction, you can install the radio. With Twisport, it's installed and mounted at the same time within a few seconds. How cool is that? If you want to know more about our products, check our webpage rfelements.com slash products.