 no no no okay no no all right time to do a little vlogging let's get our vlogging stick on here and we'll be good to go what's going on oh god oh my god I got some vlogging to do okay guys so today we're just gonna do a little bit of vlogging for you as you saw from the stupid intro that had a problem here now this is the hole to where your mouth or your your your selfie stick is supposed to screw in well that stripped out a long time ago well this is the hole that kind of keeps your your base plate from turning on you and so I tapped that out and I was using that and it worked for a while but as you can see it's finally stripped out too so and there's not a lot of plastic in that one these are plastic now the one we're recording on on this one today it's got a steel insert but the plastic starting to crack around it but that's no big deal because I can just you know smooth that off with some glue and stuff now what we're gonna do is we're gonna try to fix this I fixed these before like this I've got this nut here okay now this nut and this bolt this bolt is just to hold the nut so it's not the right it's not the right threads but all we're going to use the bolt force just to hold that nut because we're gonna be getting this nut hot so I found me a nut and just happens to be a black nut too but it screws right on to all my tripods and my selfie sticks so what we're going to do is we're going to try to heat this up okay this bolt here and I'm going to set it right down in there and kind of let it melt its way down inside okay now if you got a really nice camera I wouldn't advise doing this I would get some epoxy or something like that but this camera is just an old piece of crap camera and we just use it for emergencies and whatnot and outside use so that we don't want to get our good camera screwed up in I still need to get us a couple good cameras but so all right so we're gonna do something like that there but first we've got to get this nut hot okay just kidding I may have to get the big torch it'll save some time I'll be right back now you don't want to get this thing red hawkers it'll melt all the way down through there and screw a bunch of stuff up so what I'm going to do is going to heat this up just enough to melt some plastic I get it as straight as you can I'm gonna pull it out for a second see it's got that plastic there that I don't want so I'm just gonna put that down like that I'm gonna let that cool completely off and then I'm gonna put some glue around here and I may weld it over but I don't think I'll have to but we'll see I may weld that over with some plastic I don't like to do that but that's fairly straight as you can see so I'm just going to take a little bit of water I don't want it going down inside the camera so I just took some on my finger and went like that okay what that's going to do is that's gonna stick that in there and I'm gonna put some super glue around that let's get this all wiped off and then I'll put some super glue around it and then I think that'll be that will be good enough okay so let me go get my super glue take the mic off you can set this upside down so we can put our glue in there you guys see that there we go I'm gonna put some glue around there now you can say in this and stuff I'm not gonna worry about this because it's just a piece of crap camera it's gonna do what I need it to do so just like that okay so like I said if it's a if it's a good camera take it somewhere and have it repaired if you have to but right now let's get some glue around there again I'm just using this gel that way it doesn't go everywhere I don't want it to go so and it ain't pretty but it'll work in this situation so there you go that's all you got to do now let's let that dry and then we'll put it on to the selfie stick or something like that and we'll see if it's gonna work all right so let's give out a little time to dry and we'll go from there okay so let's check our work here it's not pretty but it's not meant to be now if this was a really nice camera I probably would have drilled it out and put a helicoil in there or something like that let's tighten this up there you go good enough good enough for this old junkie camera there's other ways you can fix it you can get thread locking stuff but like I said for all this thing is that was good enough that's what I had and that's what I use so there there we go make sure the camera still works yep still working there you nasty that's okay there you go hey guys awesome guys so that's how I fixed that if it's on something that's really not a high dollar item or you need a quick fix for something you can use that in all different kinds of ways so that method there just be careful if you're using electronics but like I said that one I really don't I mean that thing is more than well paid for itself excuse me that thing has made several hundred videos and so has the one we're using now already but this thing here yeah so I mean we just you know throw it around whatever and if it gets ruined that thing is done paid for itself several times so also if you want me to do more parody intro stupid intros like that to make you laugh let me know and I'll come up with some stupid shit trust me all right guys hey thanks for watching don't forget to check out monkey 1000 channel and I'm Shaber 1000 and I am the myth I am the man I am the legend Shaber I'm gone for now bye bye guys thanks for watching