SEIKO CHRONOGRAPH 7T92: Stopwatch Hand Position Adjustment.





Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Dec 16, 2010

Sometimes the stopwatch 1/20 second hand needs readjustment. Normally the error is caused by magnetic field, eg: place the watch near neodymium magnet..

To adjust the 1/20 second, 1 second, and minute stopwatch hands;

1. First, pull out the crown to second click.

2. Second, press and hold button A (upperside of crown) for 2 seconds.
You'll notice the 1/20 second hand turns full circle.
This means the 1/20 second hand is ready for adjustments, use button B (lowerside of crown) to adjust it manually. The hand will move quickly if button B is kept pressed.

3. Press and hold button A again for 2 seconds, the 1 second hand will turn full circle, this indicates that it is now ready for adjustment. Use button B to manually adjust it to start position.

4. Same process for the minute and hour of the stopwatch hands, (not shown in video). Press button A and hold for 2 seconds, they will turn full circle. Use button B to adjust. Holding button B will make them move quickly.


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...