How to fit a Felton Oxijet™ for a shower handpiece

See more on www.oxijet.com

Instructions on how to fit Felton Oxijet™ for a shower handpiece.

1) Unscrew handpiece from the hose.

2) Ensure there is no lime and calcium build up in the handpiece. Any restrictor after the Oxijet™ will reduce its effectiveness. Restrictors may include lime scale, or simply restriction in the handpiece or shower head itself.

* To remove lime and calcium build up: Soak handpiece in a water and white vinegar solution.

3) Remove any flow restrictors between hose and handpiece, or hose and wall elbow.

4) Ensure there is no flow restrictor built into the handpiece.

NB: If this can't be removed, your Oxijet™ may not aerate to its full potential.

5) Screw the yellow Oxijet™ into the handpiece. The water flow should flow in the same direction as the arrow on the Oxijet™. Ensure any washer supplied is in place before securing the Oxijet™.

6) With the hose washer left inside the hose, screw the Oxijet™ and handpiece into the hose.

• Category

  • Science & Technology