 what's up everybody excuse me while I get things ready here how are you all doing today how we doing let me uh turn that sound off there on mr earthworm jim oh hang on a second all right good good good how are we all doing today what's up welcome back welcome back after a nice weekend i've got the sony kv back ready to go ready to be further touched touched by an angel right oh goodness all right well i hope you're all doing well i see a lot of chat going on prior to the show even starting so that's awesome welcome back everybody yes oh sorry about that we've got a strobe effect when we change over to that white screen so first off you can tell the cap job went perfectly well on the sony kv i managed to do it over the weekend on saturday and sunday and then we're getting some weird can control our questions okay i'm getting some weird getting some weird things about obs said we just dropped broadcasts and that we're back on broadcasts so um if you don't mind do me a favor first off if you're in the show today please go ahead and hit the like button for us and we'll get things going here in a second we're going to get working on the sony kv 20 fs 120 which is that flat screen trinitron we worked on at the end of last week here in debunker and again as i said over the weekend i went through and i recapped that chassis and also the neck board refloat solder on the neck board refloat solder on a lot of parts of that main board too and i will be hopefully making a whole whole whole whole video on it and i don't know what's going on with this tv right didn't we have technical problems last time didn't we have technical problems last time when we were messed around with this kv so hopefully that will not be an issue as we continue to work on it and uh it's been running for about an hour solid getting warmed up today and i've had a couple hours of it running so looks like alex said he sold his 20 m for you sorry why do you have to do that i'm maybe i'm way back whacked up in the anyway thank you everybody thank you thank you jake for coming back hey james leppy alex lee joe ray six hosey manwell marenta sorry if i said that wrong alex lee well smasher josh dr claw andre welcome in everybody ronnie s and that's about as far as i'll go up flat screen crts in the way do you know this one's pretty light this one's pretty easy to move around there's not a lot in the back of it for a sony overall that's 20 inches uh it's actually on the easier to move side it's definitely not as heavy as a pvm it's probably about 50 pounds so it's a little bit heavier than the 14 inch pvm robert welcome crank calls every time i come on here all right yeah oh i know it i hear yalex anyway robert welcome so in a second here we're going to do that i've got some things i'm going to show you first i have a bit of a question too i don't want to let me ask you all something let me ask you a trivia question if you had a power supply like this that didn't make sure i'm not reading this incorrectly yeah if you have a power supply like this generic power supply and it doesn't tell you whether it's barrel positive or negative it's a dc 12 volt power supply but i don't know the polarity or the barrel orientation how the heck can i figure that out why am i why am i being stumped by this how can i figure out what the the barrels are on there so that's the uh trick question of the day if you know how to do that let me know and i'll love you forever but while we work on this crt i'm going to show you i'll show you some tools today that you don't get to see because they're unobtainable pretty much and they're stupid priced first off we'll look at this climb tool i don't know if i'll be able to get close enough to get you any good views with it but this will separate each colored line this little climb lens if i put it against the screen so um i will put some tape on it because it has some they're supposed to be soft but they're not really soft i know but what i can check andrew i was gonna say i can check black public outside oh i guess you're right i guess if i just switch it and it doesn't read then it wouldn't be right right i don't know why i didn't think of that mom i'm being just like i said i've had too much crap going on i can't think about stuff so obviously it would it would be able to just put my multimeter in there because i was messing around with my multimeter and i was like well this is gonna read either way if i put it in there but you're right if i put the black and the positive and it's a negative it's gonna not read sorry yeah i think that's a brain fart for me thank you yeah i can't the problem is is i can't just take it and and assume it's out out or negative i believe it is but it's for some reason not marked and i can't just stick it into this device because it's like a five hundred to a thousand dollar device and the owner didn't send the cap or the power supply for it so yeah i don't know what i was thinking have i been in england smash or josh no never been to england i've never been to europe actually i don't think i've ever been i've been outside of the united states but it would just been like islands yeah not really much i've been all over america but not anywhere else all right i also have converges strips that i've salvaged from other jobs in the past that are dead tubes or something i've got quite a few of those here's a bigger one just a magnet on a plastic strip right there see him and what i'll do there is i'll i'll insert those in the back of the tube in the corner and we'll see if we can get those to clear up now this tube also has a deflection yoke with a um with a couple potentiometers that you can turn to do bigger adjustments and sorry about that strobing right when it hits that white it has a hard time with it i probably should turn the auto off but we'll need it in a second probably when i start messing around and moving it we're gonna need that autofocus but anyway i'll go behind there i'll pull this uh screen as far up as possible i'm gonna i'm gonna switch the tv over to the monoscope pattern and the back of it is open so the back's still off um we'll check it with this tool we'll insert some strips and i don't know really what else we can do we can spin those potentiometers and hopefully we'll get it cleared up i think the overall geometry looks pretty darn good on this thing considering it's a flat screen and so we're going to look at some of those things we'll first um let me switch over to that 240p test suite yes okay so obviously the stream still going that's good and that means everything's all right earthworm gm there very good look at tv all right all right i should i should be able to come over here and be right here with you guys and um i'm on the microphone over here and i'm gonna move this closer let me just see yes it's going okay we have sound everything's good and i'm going to again try to get this closer for you we're getting closer guys i'm sorry this is live tv here and we're gonna try to get in there as close as we can i'm gonna turn some lights out um some of the secondary lighting in the shop see if it helps any this is such an interesting stream i've never tried anything like this now i'm gonna be behind there sticking these before i get too far let me show you what i'm gonna do there we go so i'm about to sorry i have to change all the lights up in here to make it look better again this set has been recapped and it's been even adjusted out it's just i'm seeing if i can improve the convergence by just adding some strips first off because there's no strips on the tube so that's what we've got here again our different convergence strips that i've salvaged from old jobs now what i need to do before which i've already done on this one is put some two-sided tape on the on the back of the uh conversion strips because if i get them there and they look like they need to be stuck in place then i will go ahead and install them and that can be done easily with two-sided tape so i'm just going to stick this two-sided tape i replaced about 50 capacitors on this set i replaced all of the caps in the power in the deflection and in the neck board and the only ones i didn't were in the tuner channel tuner the input area and the what else there's one more thing audio i didn't recap any of that so i know some people were asking those kind of questions out there i hope that helps because it was that was honestly that was about i want to say 60 percent of the caps so it's maybe maybe not maybe more somewhere between 40 and 60 so there would have been another you know in order to do a full recap would have been another a lot more work and the set's working perfectly since then exactly as it intended i've even gone through and this will be more talked about in the video i have for it i've gone through and i've checked and changed out all the um or i've done all the settings there's a couple settings you can do to kind of crisp up the image because this can be a little bouncy if you look at it real close the pixel or you know the actual light up um phosphors on the on the uh on the grill itself that do look a little bouncy if you get really close to it but apparently after all the research i've done that appears to be a common thing with this set so that's what i've done i've just put the double-sided tape on here and i've got three convergent strips let me see if we can get over there and if there's any way if there's any way to uh plus this set was only from 2005 ish i'm gonna take us back over to this view and maybe we can get in there and i can show you through the lens that white line i do not know i'll try to get this convergence lens right here and show it to you now the good thing is the convergence lens will go right up against this uh set nicely because it's it's a flat tube whereas if it's a curved tube that can be kind of tricky but i'm getting some i'm getting some electrical tape to put under it because like i said there's a couple of spots on there you don't want to scratch your tube screen with something like this which you could do all right guys i've got the mic i'm going to try to do this a little bit uh talk you through this a little bit better so this tool is called the convergence it's a convert client convergence lens but don't waste your time trying to buy one of these things i think you can do the same thing with like a jeweler's loop but i'm going to come back here i'm going to show you this i'm going to i'm going to need to get the microphone stand and um do that safely i've got the microphone moved by and you move the stand hang on a second okay that should be better all right i do this get you a view of everything so this is separated our lines right and uh what it's doing is showing me in this corner the green line for like the green line is the center the blue line the blue line is closer to the green line so those two lines are closer but the red one is way high so hopefully we can get that red beam to come back down and converge with the other two babes by adding the magnetic strip but this is what will always happen in the corner of a converge of a set that is a consumer grade set now watch this i can use this tool and and get a reading where i can actually straighten these lines up and it'll tell me which direction each one of these colors is off watch so how about that we've i've used the tool now to line the arrows up check it out i'm not quite sure about the the measurement things on here but you could see that the the the gun on the right or this side which is a red gun it's way off right i had to push the dial all the way to the right side almost completely just point six scale meanwhile the other one was pretty close for the corner it was like it's only one and a half oh um that's how you use the tool it just shows you which line is off so you can use that this would become more helpful actually not in not in this situation this would be that tool is most helpful when you're trying to set the convergence on the convergence rings what's up del yeah guys all right i'm gonna get back here in the danger zone so i need you to do me a favor and hit the like button now just kidding if you really can please do it this is um so i wish i had another camera i could add but i'm kind of stressing my system as it is so what i might do is i'll take some pictures back here while we're here i'm going to take some pictures of the back and what i can do with those pictures is then i can upload them to the cloud and i can pull the pictures up so you can see the fore and after what it's going to look like i mean i'm taking a live pictures right here right now let me see if i can get some flash i need some flash over on this side because this is going to be the side where you can see then i'll take a picture afterwards i'm sorry so you're just staring at the screen here so i'm going to take the larger of the strips and i'm going to stick it behind and hopefully to manipulate the corner you're looking at we turn that light out there maybe that'll help some maybe i could zoom in a little more let's let it sit there and stabilize for a second stick this in and let's see how it looks how does that look is that better adding that one strip did you guys do you guys agree does that look better i haven't i haven't put it in there for good it's hard for me to see from back here but i think it looks better and then what i'm going to do is i'm going to turn the light on i'm going to i'm going to fine tune i'm going to stick my face around the front a little bit more but i just wanted you to see how that as you manipulate it i mean it's you're just free handed one hand up here watch out don't hit the yoke but you're literally just moving this thing and trying to get those beams to i guess like we talked about converge better and uh so that just tells me this can be done and what i'll do is i'll actually zoom back and maybe uh maybe i can turn it sideways a little the camera and that way you can see me actually do it and then i'll set it so that let me do that now i'm gonna i'm gonna resize this since you've gotten to see it now everybody's gotten to see kind of the way you do that and you know i'm going to be honest with you sometimes it doesn't always come out and look better and sometimes you have to double stack the strips we get some light back in here and let's see what we can set up it would be better but i like every time i go beyond i have two cameras now every time i go beyond two um it it it starts to make the system crash and it's not like the gpu it's something i can't find a good enough high quality enough motherboard that isn't full of crap um i know that's a weird thing to say about it but that's usually what i think is the problem is the motherboard situation and like the usb problems because they're all usb cameras and then all that jazz but anyway um yeah right now i just got the two see about getting some extra light in here take that out there's my microphone all right i'm gonna add some more light then i just let me see both sides right now you see that strip though it's just sitting there right now i'm about to put it in permanently though by um donuts right here so we'll just take it out let me get this strip this back of this blue strip off which is the back of the two-sided tape i know the power of the magnets hey jack browns or billy jacks how that's funny man i'm going billy jacks dude billy jacks is where the party's at there it's in there now you gotta be careful obviously because the anode cap's running right next to you right there next to me go yeah hey sticky nugs yeah what's that place is cheap dude cheap beer is not uh i don't know where else you definitely need to have good life insurance if you're having a kid no matter what what jacks that's funny billy jacks is where the Jonas Brothers showed up back when college game game day came here last year all right that one's in i have a second strip i'm gonna just see if that helps anymore whoops i mean i think i'm at the like the spot of what's we call diminishing returns where i can't get it to i mean you manipulate it anymore unless i had a really strong strip so that's uh that's kind of what i think i think these are gonna vary in intensity as far as magnetism maybe maybe it'll help the other corner if i do the same thing it's like the deal is like how much lipstick can you put on this pig not being i mean that's kind of what you're doing i like this tv i'm just kidding but you're not gonna get it perfect i mean it's just not gonna happen because there's not a whole lot of hardware back here now what i did show you um i don't want to this is the yoke right here and there are two potentiometers right here that i was telling you about you can use to adjust and fine tune stuff still got some issues up top so it's still running i've just put two strips in so far do is i'll uh i'll do some adjustments on these two potentiometers and i'll flip it around so you can see that i don't have to worry about muting anymore this should do a pretty drastic swing here let me turn these lights off this is the other it's a master convergence it's still sitting muting on there muting off there we go it's looking pretty good brightness um guys i'm sorry i think the image just uh the image just froze on me don't worry though we're still live see i'm having all right now i have troubles with two cameras all right hang on guys might just come undone a little bit or something see if we can't get her back online let me try one more thing here maybe i unplugged it accidentally hang on let's see this camera you know we can get it back online interesting yeah it's like it just finally unplugged it and plugged it back in and now it's not coming back to me because it's not showing up on my list of hardware man hang on well we're gonna give it one last try and we'll see if it comes back to us or not says it's here activate oh look at that lucky us there we go all right let's just i'm just connected or something had a connection issue back there all right i am sorry guys i'm sorry about that we're back and it's back thank you thank you for your patience thank you for checking out that little convergence fun again you're never going to get this perfect but thankfully you don't need to be up into business of the corners of a crt that's flat 20 inches just staring at it nitpicking every problem with it because that's the lovely nature of analog video stream 240p you want me to go all the way down from 1080p i'm already at 30 fps to try to keep the system maybe i could go three cameras if i want 240p maybe i can go like four cameras if i want 240p i think i can only go down to 480 though i don't know if you can do any i don't know interesting thought i probably have to go and get some really old equipment all right so we're back we're back online and again i mean if you compare this television set the way it looks right now to similar ones that are made by the likes of jvc or uh who else that we have in here those 20 inches and we've seen these other ones that are like insignias and things like that but toshiba's this is a good one and you can adjust like it's got a few more adjustments available on it that i guess we could walk through some of that right that would be fun we could let me get situated what we can do is some geometry adjustments if you'd like it looks pretty good i mean for for what it is i'm sorry about the moray i know some people like that drives them crazy um we're gonna uh we're gonna switch over and i'm not gonna probably make any adjustments because it is set to aspect ratio and things but i could still show you how the because i don't have to write i don't have to write that data close to look here let me see if i can get the screen looking a little nicer yeah yeah the james that's what i was gonna say the there is a like a tiny little flicker and it's like something that you can't get rid of but there are some things you can help i shouldn't touch that camera damn it i think zax yeah i just screwed that camera up again it's definitely got an issue in the connection point in the back of the camera it's not good all right let me see if i can deactivate it and get it back online all right that's what we can keep this thing from glitching out i won't touch it again yeah it's probably is very good okay the thing is these stupid cameras are all solid i probably should just buy this new a new one of this the only good thing about this is this camera has a lot of controls in it for a cheap camera that you can't get from adp that i've got other 1080p cameras that are more expensive that are way worse all right we got her here let's see about the background light might turn off some of these back shop lights and um get us a better picture i'm also again to the monoscope pattern and then i'll dim that down that's actually kind of good right i mean that's too far okay let me get that i think that's probably good i can turn one of these lights out all right here's what we're gonna do we're gonna open up the service menu and to do this you need the sony remote and you could probably do this with any similar sony remote that's from this time period that might work if you pointed at the set it works then it will probably work for this let me show you where i got this information first it's i think we've done this it's but it's from the service manual and the service manual is available online for this tv so um what you do is you press the display wait no first off sorry tv should be plugged in and then you power it off like this okay and it on the remote you're going to point it you're going to point it at the set you're going to go display the number five volume up and then power and let it come on and it should be in service mode now okay that's all you have to do hit display five volume up and then power in sequence like that and look it's in service mode okay now cycling through service mode you're going to start in your deflection block look at that that looks really sharp give a like for that sharp picture and how you can actually see the adjustments we're looking at how about that all right anyway you're going to start off here it's ntsc videos marked at the top we're on video three and it is the deflection on the left hand side of the screen under that we have horizontal size which is the first setting the current is 28 that's the current setting that it's on now to manipulate these settings we can use the remote and we can do two things we can change the setting we're on by using we have to use the up and down but we don't use the up and down on the remote we use the number one to go up the number four to go down okay so see i used one i went up to two four i go back down to one okay and then to use and manipulate the data in the setting we're going to switch over and use the three and the six so the three is up see how that went to 29 and the six is down and that went to 28 okay now i'm going to tell you this in case you just want to see what or know how to do this setting you can actually save whatever you're setting once you've done all your changes i believe it's like this you press muting and it'll say right up in the right hand corner and then you press enter when it's red right so it says muting see it says right up there in the red and then you press enter again and in right will turn green and it has written any changes you've made to the hardware's memory and now when you turn on the tv it's going to it's going to show whatever you've saved it as okay now i'd like to show you some of the other important settings again in case i just like this is all in case i clipped this segment which is really going to be low quality video i doubt i will but if i decide to clip it for that video i will um this is in the service manual very bits so let's go over here now to get you're going to need to scroll through a lot of these deflection but there's a lot of good deflection all these are def all basically trot okay that and low are all good deflection settings you can use okay all right so this is something that um was told to me to help eliminate partially the jitters on the screen is to first go to these a fc settings okay that's number 20 on this set could be similar could be a little bit off that 20 on yours but from the information i got this needs to be adjusted this is normally set to zero and to get a better image supposedly you can increase that to one but that's not all you need to do and this is all based on a goofy reddit post right let me see if i can find the reddit post it's been a while somebody here it is so on reddit it says i got the a fc and a fc one settings okay so sorry anyway this will impact the edge a little bit it's normally on zero um you can increase this one to one and then the setting after that is 21 a fc one you can also adjust that it actually says one on it what should that say normally a fc is set to zero i changed the fc setting to one a fc two setting to two or three so a fc one is set to one it just kind of shifts your image horizontally slightly so let's see of course yeah right trust me bro so that's widescreen all right so that's on one let's go it says two or three on this oh that can only go to one so we're gonna leave that on one i'm gonna look at these i'm gonna look at them really close leave those three that when i look at it closely two looks the best so that's what i'm gonna leave it on okay so that's the first settings you can look through and you can watch your screen scroll through those a fc and a fc one 20 and 21 on this set and then there's one more which we looked at before which is the very oops i'm going the wrong direction sorry everybody no i'm not where is it see right now we're looking for v m o f there all right this needs to be set to zero okay this is your velocity modulator these usually suck on crt's especially for 240p really messes with the edge geometry and i guarantee you that most of the time it's gonna look better if you set this to off which zero is how you turn it off and we went through this more on the last stream those are those two settings now if we go back to the beginning all the way back down i'm gonna show you these deflection settings we have on here not not adjusting the blanking or anything all right sorry let me get it just a little bit bigger so you brighter so you can actually see the adjustments i'm making so i've got it first in let's start at the beginning right i mean that's obvious we've got horizontal size so if i go up on the horizontal size that increases that okay or decreases that right okay now if we go to position same thing move it at left and right and i'm not saving this value but i don't know what it was on i want to say it's like that probably anyway vertical size same thing of course that's all gonna impact your aspect ratio vertical position that's all pretty self-explanatory on geometry and um basically what you're trying to do is those red squares you're trying to make those very much even like the all sides of them the length of them even that's the goal here to get that aspect ratio correctly and then you want to bargain with yourself how much screen do you want to either uh over scan a little bit or do you want to understand a little bit on your image area linearity is something that's a little bit trickier this is on 40 but if you go up here this is going to kind of adjust the uh size of those squares in the middle of the image too where they you want everything to look square you want all the smaller squares to be the same size so that's what you're going to use the vertical linearity i actually like this older pattern in this to use linearity checks which is these circles which i tend to use this so that way when i circling through here i'm trying to make these circles as round as possible without oblong shaping them at all okay and then same thing with sco r the next one that's the same thing it's kind of like both of those are linearity settings you have two linearity settings s core and vertical linearity okay and then vertical both we go back to the yeah and i'm not if we go back to our monocles monoscope this is going to let us sweep things see how that manipulates the bow where it makes it look like a bow for a bow and arrow in case we're bowing one way or the other we want to try to even that up right in the middle instead of having it look like again a bow or an arrow on one edge or bow i'm sorry 33 of what it was all right vertical angle it's just the angle picture angle watch as i manipulate this you'll see how it's angling the image right and you're just using these values straighten that up guys that's it and then trap okay trapezoid is what that stands for that's going to be like pin settings pin cushion settings let's see yeah see that moves it on the plane where our tops and bottoms like once moving closer to us once moving further away from us guys this is going to look so bad because i'm basically making the calibration worse by showing you this demo i just need to not save it pin amp this pin phase see pin amps the one pin phase is the what it's normally called pin amps the one that makes it look kind of like a globe a rounded image okay and then there's thankfully this has an upper u-pin is upper pin so that's going to change that top one you can fine tune that and then same thing there's an l-pin for the lower you can fine tune that bottom setting get that all situated and then trot let's see what trot is i don't remember all right don't mess with trot i can't remember what trot is no trot don't change trot stop after you get to the pin amps so i'm going to just power this off because i don't want to save any of those settings i mean i just totally crapped out my settings on there that's better so we got it back and that's kind of what you do once you're done you want to if you wanted to write your settings you would go in before you closed out the menu you would hit muting and then enter like i did earlier and then you would power the tv off power back on it'll look like it does we'll get out of that menu now you're not going to get it perfectly i mean you will see the screens leaning of course this the image i'm not touching that camera either is leaning ladies and gentlemen i'll try to make it look good patterns just not going away for us that's so funny this is going to give you a good fun experience um now this tv i'm gonna somebody wants to buy it so see if they actually do display button they end up getting sold or not i'll let you know patron wants to buy it never beat the star cup race on this file it's not gonna look good so this actually does have color um palettes or temp temperatures on this set so you can adjust it a little bit make it more blue make it cooler make it warmer i think it's on a bluer setting now probably i like the cooler i don't know what the warmer settings where like you were asking somebody was asking about the warm-up screen yeah that will show up blue sometimes or green depending on what on mine depending on what color temperature you have used goodness gracious i can't talk and i'm trying to drive at the same time come on baby see you but the color will vary and then you can also since it's on component cable you can use like phase chroma those settings to to manipulate that a little bit and actually balance that color out to whatever your liking is and if you really want to jump in the deep rabbit hole you can always go through and do the color calibration on your set with a color monkey and a crt and a a bunch of other tools like stick freaks has the stuff on there the tutorial i don't think adding light hurts too much over here let me see i mean there's also this like if i press picture mode on here um it's also look like there's a pro look at how much vivid it's i'm trying to put it on a mode that actually shows up better on the on the camera and not so much a mode that looks perfect on when i'm actually looking at it so the colors may look a little different i mean that definitely looks like less brown the brown's more rich on my screen than it is on yours we got richness the browny richness oh man this is like the problem i feel like with mario i get the worst um items in this game i'm not that good at this game but i like it still fun to me oh there's a good item go baby oh man how do i miss you chump zilla there we go of course that will only put me ahead for a second do do do do do we're gonna run into something like a who a monkey under the king of kong here look at him he's just throws those bananas like there's nobody like they're going out of style baby i wish i could hit him i'm gonna banana him you ever notice how you could sometimes shoot him with stuff and they just jump over it still that's always a fun feature in this game here we go can i do it oh i hit a stupid banana oh man i didn't even see that that's terrible i think that yosh oh that's that's heartbreaking he's already celebrating his way to victory dog on it i can't believe it yeah this is a good one i mean i you could find one of these still and if you get a looking like this if you want to i mean it's a lot of work to do what i did where i went and recapped it this is like the same level of restoration you do to a pvm so well that puts us in a tie it looks a little better now this one's all white this is not gonna work yeah i'm not gonna put you guys through that that'll run everybody on the stream off the white levels let's see if i can get it don't stare directly into the light oh we may be able to get it almost oh come on baby focus oh i don't think it's gonna happen no all right guys that's gonna it's definitely gonna give everybody a painful finish if i sit there on that level too long all right so there you have it i don't know does anybody have any kind of questions for me on this thing any questions out there in tv land anything at all anything you guys want to know i think it's a good set i mean you get remote some people will like these just as much as anything that looks better see when you get the dark backgrounds you can get rid of a lot of issues when you're filming a crt oh yeah gamecube we could hook up a gamecube to it well i could open that back up somebody's asking me to show them the settings and then you can come back to this part here's what i'm sorry i think i just i think i didn't knock out the audio but it definitely stepped on a cable under there all right let me uh turn it off i'll show you my settings and then you can just slow down the screen and and look at them and i'll scroll through them and you can use those for reference and then i'll put it back on the game okay display five volume up power see if i did that with one hand but i'll help you out i'm gonna look at these settings i'm gonna show you my settings on mine and uh no i didn't do it right here's what i'm gonna do first i was filming turn it back on i'm gonna turn it off this video input i'm gonna turn on the dvd all right man that dog snoring muting five volume up power that should get us go go service mode that's right now this one cannot be modified what is it doing it's not wanting to get into it now it must be missing a button or something see there's different you got color temperatures you can change on here cool warm neutral all right let's go i don't know why yeah that's really the way to go is rgb to component if you need to do anything like that there we go finally i don't know why that took so long all right let me go back through here i'm going to zoom in so i could show you these settings in case you want them like right there number one is set to 28 43 for number two 42 for number three 32 for number four 20 for number five 33 for number six seven is also 33 eight is 35 nine is 31 10 is 29 11 is 32 12 33 and that's it and what i would recommend here's some of these others in case you want to look at them but i wouldn't adjust these except for the afcs that we talked about i would adjust those and that's uh that's the settings on mine so you can check those out and what i would do is i would never just say that's going to fix your tv because you need to you can use that as a good starting point though if you've messed up the settings and gone just a little too far okay and messed it up and then saved it accidentally you can take those settings and try to start from there this is going to matter the condition of your capacitors your tube your deflection yoke everything is going to make a difference on what the image looks like it's not just settings aren't going to be universal for everybody really let me turn that one more thing on this focus off there we go um let me put let me get something else do i have component cables yes i do have component cables for my gamecube 480 guy through components all righty here let's see does this even work yeah it works oh yeah look how good that looks i think we hit a sweet spot here what do you think this is what you want right probably this is this is like uh oh uh oh it's so awesome it's killing the camera oh gosh it's just too much for it it's just too powerful the footage is too powerful of the gamecube combined with the sony trenitron vega oh gosh there you go that's gonna sorry about that we're gonna get past that big bright light there we go that looks really good there we go all right looking good hey hey hey hey all right everybody i hope you had metroid 3 i know right that's it that's it actually looks really good on this set though this will be a good thing to say oh gosh man that's that's what it would be smash bro tournaments i bet they would love this this guy this would be the perfect tv for that looks great all right guys set it there about an hour and a half in not a very long stream today i've got a couple other things i need to do it with yeah no this is not a silver model this oh this is a silver model the tv is oh you're saying the ps2 sorry i thought you were talking about the gamecube for a second it's a purple purple gamecube um it does look great no so leppy you asked about color adjustments before our brightness adjustments or vice versa it depends how far out the colors are the farthest like how far out are the colors uh because you're gonna need to balance them a little bit both of those things thanks iota uh so if the color is really out you gotta sometimes just get that going sometimes you gotta turn the color the brightness up and the dark the brightness and stuff that can be set kind of last to be honest you just want to make sure it's bright enough for you to see and then you can tune that in to whatever exact level you want so i'd always say color first all right everybody that's gonna it's gonna wrap things up on the streaming probably for the sony kv here i'm gonna bring another tv you're not probably you know maybe we'll do something else next time i don't know i got some equipment somebody's hired me to work on another time based corrector so i need to work on that tomorrow appreciate it james i hope you guys enjoyed yourself got to see some actual stuff like happening here today we actually got to see some things happen it's fun to work on these sets and kind of see them go through these changes with you it's always great to have everybody here that can make it i think in i'm thinking it'll be a stream tomorrow uh there will not be anything wednesday and so if i can make it tomorrow boom we'll do it if not it'll be a thursday it'll be the next time you see me i want to get this episode done i really want to get this episode done i've made uh i'm about 75 percent there on it with zezz's journey here to america i just need to figure out a couple last things yeah it's a time based corrector we could do that uh maybe we'd do that tomorrow like i said if i make it tomorrow around this time guys we'll work on that time based corrector it needs to be recapped it's like a thousand dollars yeah that makes sense huh plus it's i mean but it's one i've already i've already covered a few times but all right everybody thank you again have a great rest of your monday and i'll see uh hopefully tomorrow let's try let's let's shoot for it let's plan for it put your notifications on we'll see what happens