 Hi there everyone! Today we are looking at the Tendennova MW6 Mesh Wi-Fi system which aims to enhance the wireless internet signal at home or in your office. It covers up to 500 square meters and it comes in an elegant black box. As you can see there is the product image and some information and on the inside there is yet another cardboard box which is again very high quality cardboard we must mention that and it carries the three cubes. They are quite lightweight made of plastic of course and they are really cute to be honest with you along with them you will see some product information some setup guides instructions and all that also there are three power cables which are needed to power the products and also a single ethernet cable you will need this to connect one of the cubes to your router or your modem. On the bottom of each cube you have two ethernet ports and a DC jack as well as a hardware reset button. We begin the installation by connecting one of the cubes to the power supply via the supplied power cable and the next thing you do is take the ethernet cable and plug it into your cable modem or router once you've done that you'll see that the LED above the nova logo starts blinking in blue. After that you'll need to download the Tendo Wi-Fi app and go through a couple of steps to configure your product. After you download this software product you'll need to use the default username and password and of course later you can just change them to whatever you like them to be and all you're left with is to set up the other two cubes the app will guide you through this process and that's basically it thanks for watching be sure to subscribe give us a thumbs up or tell us what you think in the comments below bye bye