 Hey everyone, Shade Bear 1000 here. Today I'm going to try to get outside here in a few minutes to Put this fuel pump on my John Deere 112. It's a 1974. I Think this is the right one. It calls for that engine. It's a colder 301 the 301 series so It comes with the gaskets and everything so it should be Should be ready to go. I'm gonna point you down here. Let's see if I can prep anything before I get out there I mean the outside of them You know are pretty much the same just some of these are different. It'll run on a cam or something That's how it pumps just like a car Most of nowadays they the fuel pumps Run on a pulse system, so it'll run into the crankcase or into the intake or something like that that makes it pump It's a pulse pump So like monkeys is that way I've got another pump out back. I think it's a good pump, but it's a pulse pump I just didn't feel like drilling any holes in anything, you know, like the block or anything like that to get a pump So I just wouldn't ain't got this. It was like 10 bucks. So free shipping. All right, so let's Let's go ahead and check this out. Well, it needs so what kind of parts we got and I'll tell you why I'm gonna try To get outside here in just a second stick around Okay, so I'll put you on this napkin here not you but this on the napkin so it's a little bit easier to see Like I said, we won't know until I pull the old one off if this is the right one or not These kind they're all pretty much the same up here in this part and This is what would be different on it, but it calls for Like I said, it's 301 series it calls for supposed to call for this pump I'll tell you why I'm going to try to do this the reason why I'm going to try is See the heat index feels like 102 now yesterday It was a hundred and eight in my area real feel they actually had warnings not to go outside yesterday. So I Didn't All right, so Go ahead and open this up make sure we've got everything here. I'm sure the other ones toasted Know these here's the gasket It goes on here. It'll go in there like that or It's got This gasket will use whatever one the tractors gone on it either want to work, I'm sure but Whichever one it has on it, that's the one we'll use Now I Am not sure what this is for But I am sure that it doesn't go on mine So it's got two different Size Let's say three. No, there's These two what they do is they'll go they'll clip into here. I gotta figure out which size I Need So I think mine is just pretty much like this Okay These are for the washers that go on the back side here for your bolts. That's where those go Yeah mine I'm pretty sure Both of them come straight up. I think the line comes in and down. It doesn't matter. It tells you Can't mix it up. There's arrows there. So You're going to come in here and it's going to come out there But like I said, I need to These just pop in you just push them in there That's the clip that holds it clips right around this Right there that little Clips in there and that's what there's the little overings that keep them from leaking But I'm not sure which ones like I said, there's different size sizes here. I'm not sure what size I've got I Got a look at the line because I changed the original line out on it So, you know, it's also got like this 90 here Kind of like a nice not a 90 but Um May go like that. I'm not sure but once these are in here, you know They're they're pretty much tight and these if you can see These teeth here Then the teeth on these right there See those teeth right there by my thumbnail They lock inside of here and that that just keeps them from you know turning around and coming out getting loose what not So let's go outside and see if We can get the other the other one off if we can That'll be super I mean, I know we can but let's just see how hot it's going to be It's not good for anybody, especially a heart patient to be in this kind of weather. So But I'm going to try to do this. It shouldn't take that long or get you set up out there I'm going to go out first to see what kind of tools I need that way I should have everything right there and ready to go. This is a how-to so Um If this is the wrong pump, then you know, I'm going to have to wait a couple days But I'll still put it in this video. So let's get outside and see what we got Okay. Now like I said, see mine are both pointed directly straight up So down underneath here there's two Two bolts that are kind of hard To get a To get a tool on it But this is aluminum. So I'm thinking this may be original Let's go Let's see if we can get this off of here. There we go And I got the wrong size Well I got a half inch on there I think it's seven sixteenths. I tried to seven sixteenths, but I couldn't get it to go on there so That happens I can bring the whole toolbox out here and still Not have what I need It came loose Let's go ahead and take it out and see I'm out back Because there's a little bit of shade here And it being a John Deere I don't like John Deere's but I do like anything vintage and antique so They don't give you enough room I don't want to drop it because I'll never find it Let's see if we can get the other one loose. I don't know what that thing is. I've never seen that before my life That kind of a bug I can get this one out. I'll see if I got the right It's just so tight in there. I'll see what I mean Once I get this out of here How close it is Now I like hex head bolts Better than uh Like Phillips But this is a case where I think A regular screw head like a Phillips Would be a lot better Because There's just no room And plus remember these are put on before the engines put on the damn tractor. So All right, let me get a seven sixteenths. Okay brought out two I brought out a uh Deep well And shallow let's see It is a seven sixteenths. It just wouldn't fit when it was all the way up in there So it tricked me There it is All right, now let's try to get Man, where can I put this so I don't lose it? I'll see if we can get this one off. I wish I had some regular screws That would fit that I would put them in instead The kit didn't come with any Any hardware let's pull this off of here Okay, it looks like it Yeah, that looks like it and it's got the paper gasket Um But as you can see Maybe See that bolt Look how close that is Plus the screw Great Let's go in the house It's hot Okay, so guys I was just telling you a whole bunch of stuff and I was not recording I just talked to you for about five minutes. Okay, so what I'm See these screws that go down into the top here. Okay I hold this together down here on the bottom There's one there See it's sticking out sticking out farther than the other ones that also makes it hard to get On that bolt and that's the one we had the most trouble with See And there's not much room there You can see that bolt the end of that bolt sticking up there So when you're there and with the angle of that frame, you know, it's hard to get it on straight So Okay, but this is so like I said these These two are the same size. They're too small And I don't need that angle anyhow Now these two this is the perfect size. I need right here. It's the same size Is what's on this old one here Perfect size fits now the one This one here that I need Is a little bit too big now. This is rubber hose. I can put it in hot water And it'll slide right over there with no problem. I'll put it on the out end of it But right now what I've got to do and I'm going to be using this gasket Because that's the gasket that is with this This is flat. This has got grooves around it Uh, what it'll do is it'll leak oil there And if you have this kind of pump If you're getting a lot of gas smell if you're if your engine's running fine It's not flooding out or anything if your engine's running like it's supposed to but you're getting Oil or gas smell in your oil when you check your oil you smell gas This could leak in here and when it does It leaks out here and that goes directly into your crankcase. So keep you know keep that in mind So what I'm what I'm going to do Is I'm going to have to Let me go get some vaseline and we're going to Pop these on here before I go outside Still debating on which one of these to use I think I'll use this I might use them both I mean it won't hurt anything To use them both I think I will I'll just use them both Shouldn't hurt anything. Let me get some vaseline And um We'll loop these up and we'll get them put in here Like I said, they've got to go straight up like that kind of like dual stacks Which that's what I want to put on it eventually so And we'll put the smaller end in the intake and the larger end on the outtake Let me get something to lube these up with. Okay, so I'm just going to use some of this It'll be all right Won't hurt a thing All right now. I have put them I have put these in my vise before And pushed them both in but I also have had them slip and break before so Okay, it's starting Make sure we got that right straight up Straight up man. There it goes. We're going to do the same thing to this side try to get them That one's kind of back a little farther than what I wanted but that one went in perfectly this one It's in there and there we go now. There shouldn't be any leaks there I don't feel like this one's right. It doesn't look right This one's like even this one's out just a little bit Yeah, that should be should be it now. We've got to brave the weather and go out And uh put this thing on so um I'm not sure if this is going to be long enough for the long one. That's why I got this little End here so I can connect it up to another one If I need to all right, so let's go out Let's try to get this thing on Okay guys, so while I was waiting to cool down what I did was put just a little bit of rtv Black rtv soon where you at? Right there just to help hold that So it doesn't fall down Because you'll never see it if it does If that gasket falls down all right, so let's uh Go ahead and try to get this one started Kind of a pain not having room to work, you know, I mean Like I said, I'd love to take one engineer Especially one that claims he's the best and bring him out And say here put this on for me put this part on for me See how well He engineers the next one Just help holding the gasket there Find a hole there we go Now it's just a matter of tightening this up. I've got This will go into the end of here like this I would use my impact driver But since this is plastic I like to do it by hand Come on See that's that's the stuff. I'm talking about right there guys Show me that engineer All right, so I got to get that off of there All right, let me get off get that off there. I'll tighten the other one And I'll show you what I'm going to do with the fuel lines Okay, so Since this is going to be hard to go over go over top of that What I'm going to do So I got some water here. I put some boiling water in here and as you can see I got it too hot I'm just going to dip this in here for a second And I'm I've got it dipped in right now dipped in there Then Blow it out a little bit And then this will go Right over top of there and as it cools down It will swell around it and keep it tight Just like that It's on there and now I'm going to put it on the top one which I don't need to do that too because it's the right size And there we go Like I said, that's already I cannot Pull that off of there real easy so now I know you can't see much but up here I've got this hose and I'm going to run it Down in here on the other side of this coil and I'm going to put this on that bottom part And It's on there. So we are hooked up under here see We're all hooked up our tubes coming up there Coming up there. This one's into the carburetor the top one now I'm going to hook it up. I'm going to leave it long since we got a pump That's not going to be a problem. I'm going to leave it long because my gas tank that I repaired Uh It held except the ring around the top where the cap screwed on it rusts it off. So I can't put a cap on it So what I've done I always like to keep the filter in here Got that on there This is just a vent That's why that predator tank's up there. That's the best I can do right now um I can put it down in here But if I do that if I put it down in here it Wants to crush my line So let's watch here I'll zoom me in a little bit. Let's turn our fuel on Yeah, see the fuel's coming through that All right, see it's filling up Little bubble there. That's an air bubble Now This is a vent. I don't even know if it's working. Yeah, there we go Now our vent's working. I got this on the charger. Like I said, that's the battery out of the truck Well the yeah the Toyota so let's Go ahead and sift this thing will start up Let me move you back here. I'll put you on this John Deere So you're not rattling off all over the place Let's see if this will start Remember which way's choke on this thing Switch blues I think my switch just died on it. Okay, that's weird Oh, it's going too far I've had this problem before Hank I've gotten it's got issues do some checking it pumped it up to the carburetor So I must not have spark Let me check my points because I don't have a points cover on there. Let me run a piece of of Sandpaper across them We'll see if that's the issue. Okay guys, I think I found a problem The plug Wouldn't spark when I don't want to close the points So I took another plug out of something I have over here stuck in there Well, I tried it first and it sparked So now I got to put in there. Let's see if this thing will start up and run. It'll start it up Okay, let me see why my throttle is not working Working some but not right Let me check that out And I'll be back with you Okay, guys I found the problem My throttle cable comes right up behind there. There's my throttle cable When I move it just the whole thing's moving Right down in here It's hard to see that right there right in the dead center of your screen that see it there. I turned it that Supposed to go where that bolt goes that I stuck in there So that's why my throttle wasn't working I'm not gonna do that today. I am just too hot guys besides. I got another package in there. I need to check out and see what it is I don't know who it's from or anything. So that'll be the video following this one I got to get my stuff picked up I'm gonna leave it on battery charger for a little bit, but Yeah, that's very starting fluid in there. I know you're not supposed to do that. It it hurts them and Whatever done up for years never blew an engine up for doing that but Shot something that in there wasn't doing nothing. I was like, what the hell? So I stuck my little ever went Here it is I stuck this in there and into spark plug wire And I got shocked because I wasn't holding it right It's a shocking experience guys, but Anyway, uh, so This man's got to be that plug. Sure enough. It was a plug. So Let's see if it'll start up getting real quick Okay, I don't know why I quit recording but I don't know what you got found out why my Throttle is not working right back in here my throttle cable goes in there's my throttle cable goes there to the governor that thing right there It's supposed to be hooked on to where that bottom bolt is down there And that's what holds it Holds the cable in place. So that's why When I'm going like this nothing's happening the whole cable is moving So I had a I sprayed some starting fluid in there and uh Nothing happened. I was like, well, I know you're not supposed to use it whatever guys, but so I was like Should have fired points was firing. So I thought See that like Spark plug cable don't look the greatest, but it's on there pretty snug. So I thought maybe it's that so I stuck this in there and I got sparked No, I didn't get spark. I got sparked. So I knew it was getting spark So I pulled a spark plug out of my old edger over there and I stuck it on there Open and close the points with my finger And it's spark. So there you go. So anyway guys, I gotta go. I got another package in there. I've got to open up Cut my hand and uh I don't know who it's from It might be another review thing. I'm not sure but that'll be the video following this one. I'm not gonna fix that right now It's just too hot It's like 105 now or 106. I think it was Real feel index well if it's real feel if that's what it really feels like That's what I'm calling it So I'm gonna shut this fuel off Let it run out of gas and then uh I'll see you guys in the next one. So she bear the myth of man alleged. I'm gone for now. Thanks for watching. Appreciate it And uh, check out monkey 1000's video. She's gonna getting ready to put up now or I think she is putting it up now um, she got fan mail today From uh, Dennis Hallbecker's wife Glowy She's gonna have links in the description to both their channels and so I don't want to give a spoiler alert Or anything like that new spoilers Just go check her out and you'll see what they sent her very nice. I'm thanks guys appreciate it We'll see you guys in the next one. I gotta go and get cooled down. Bye. Bye guys and take care