 A little bit hectic this morning because this is a last-minute job It just gets better and better. Yeah, the bad news is bad news first corners up. You'll see it's a mixture of bricks Right check there's no music on the radio No, right So this is what we've got today, which is a little bit hectic this morning because this is a last-minute job And it's 17th of October. It's 10 to 11 now. There's been a lot of running arounds back and forwards We forgot to ask the customs to leave us water. So I've had to bring some water from home I've got a bit bailed out, but that's not ideal. So this is it Customs had to go on shelf Decided it's not for him and then it was left. I'm not sure what's been left Obviously, it's been a while. Alex has already stripped off the vegetation this morning Well, I've been backwards and forwards and Yeah, come find me. Wellies So we're going to check all the measurements. We're going to check. Let's check what he's done He's okay. If not, we'll just take it down Trench block can stay and we can freaking fettle on top of them and then concrete steps up here There you go. So we've got this this side set out now the dimensions are five meters wide and 3.1 projection And first thing I'm going to do is get the laser level set up and find our Take our level off the undecided the bifold doors So while I see them, I'm just going to dip Dip all the levels. Sorry about the sound but the microphones have gone away to get repaired today Should be back next week. So yeah, that's the plan Might be a bit of demolition there We're gonna have to the brick works already crept up a bit higher on the brickwork on the house So we take this So the block work is okay. We can just cut that next course of lockdown the brickwork isn't so we'll probably have to take that down below ground level and Put a course of splits in or brick on edge But yeah Let's get stuck into this and get it fixed Got me interested in on this. I should have got actually this first thing this morning instead of digging But yeah, please there's a bit of a breeze in the sun's out but these things There's 200 briquette and they're all soaked Like I said, they've been sat here for a year, but they've been wrapped and when they're wrapped It doesn't keep them dry. It traps in the condensation because these are actually Seeing all them on the side of the bricks you can see that's condensation the way it's formed on the side because they were stuck flat So the dry ones are very pale as you can see that's that's a dragon But the dark ones are very very wet So We've got our dimensions. We've got our diagonal our diagonals five eight eight three I won't show you how we did that just done it a few times now a few videos So we're going to go from this side where you set out. We're gonna Carry that line up to DPC. I'm gonna straight the line across there Mark that one and then we're going to start checking checking the squares and the dimensions and one of you So let's get that bit done and then this lot's coming down all the brickwork block work can stay We've just got a cut to go over the top of that So, um Yeah, let's get that done. Sorry should have mentioned yet. This is all our gauge five six five from the block Gages five twenty five or six hundred So what we're going to do is going to cut a piece cut a block down to about a hundred mil And just put that all the way around the perimeter on the outside That's going to save on a few bricks as well. And then that get us all level. That's our pig cut out and then the inside We'll work that out later, but um Yeah, and then Plan is trying it all the block work up today And get the two corners up for the face work tomorrow And then after tomorrow game over I think for about three or four days stretching by what a storm Babette Bet Babette It's a new one in it. Sounds like us. Okay News update it just gets just gets better and better. Yeah, the bad news is bad news we Put our mark put our marks on first first go straight across to get our diagonals and that's 67 mil big So it needs to go that way Basically, it's that cavity more or less cavities about 70. So that whole thing is going over By the way, it's that cavity So we're gonna have to get this trench drive Run a course of four o'clock along here and just move every three rebuild everything here Move it over Change what could stay in Yeah This end because the steps up This row block is gonna work gauge. We can just put the trench box straight in there to cause a block on the outside inside Six course a bit on the outside So I think I was getting this plot we've done today and getting the corners up is It's been there been altered Yeah, about three inches with On the concrete Friends you're back on site I'm just Granted They're gonna be hardcore Locks on the touristy bad to hard to clean because the texture sticks really tight to block work Especially before someone makes When is the day to go over 10 to 8? I've been at the surface. I need to get this pallet down To get out of it to get out of the way so you can still get access because the sound's going on there Sounds always better on a pallet doesn't soak the moisture out the floor. It's gonna be there for a while I've got to get him a glass scraper She wins you this Once that's done The tomb bags are coming over the fence and they're gonna get So anyone who doesn't like seeing the bag split look away because we're gonna be splitting three of them and Yes, so the stones going here because we can't reach over there and we put onto a nice hard surface It's easy to spade anyone who's tried to spade at 40 mill down MOT out of a bike wouldn't know exactly why we're doing this and Sand over there four bags of cement and insulation boards are coming Everything except the biscuit which we'll be bringing up To get this slab because that's our mission is to get this up to the And then of course we're going to take it from there He's going to say what to do after that all the cuts are ready to go all the blocks are ready to go We need some more blocks go across maybe seven. I might just use the broken bricks clean a few up and just Be like French doors with a flag frame either side on to little door for and then to Door door for and then pillow up and then brickwork for the rest of the ground both sides So it's all symmetrical. Let's get this done. Get me coffee and see if I do the visual Excuse the wind because Stone bar bet is approaching and I might throw away for a pair They got picked up yesterday, so it's gonna be a week before we get them back so I'll try and keep the camera Shelter from the wind as best I can so there you go There's a hard standing for our stone. I've just put those pieces in with a stop stone falling back into the grass Obviously it can go that way because that's getting stoned a bit We just have to be careful stop showing up off these flights cousin even if you hit the flag You can do damage to your wrist so I'm ready for delivery now so I can get Mixer set up. I've got me electric there So all the buckets are filled up by the customer. So I've got plenty of water for today And I just need Alex. He said he's gonna come in as soon as he feels better There's a lot of pain. I've got a very poorly family at the moment But you just keep Muddling on don't you? He's done it. He's going off in Eight days, I think years coming down for ten days, I think so I've got a couple of points and jobs lined up Which I probably won't take you along to because nobody likes watching points and jobs It's all right, I'm gonna get this mixer set up. I'm gonna get off and mixing and I'm gonna start Doing something here. I might just put the Face corners up so it's all set when Alex gets back I don't have a show no ready, but we have a full squad My boys in He's been brought to me about an hour ago. Thank God needed him today So there's four up to First corner's up. You'll see it's a mixture of bricks He doesn't want all the engineering bricks showing because it's quite high at the ground at the side. So he said two three maximum showing over the ground and then face break up to DPC all these things here and Across the front it's gonna be too face showing because the ground levels obviously gonna be up The doors on the front and you don't want more of a drop than 150 mil No point face brick any lower down because another machine on the other side. It's just gonna be Just two courses of face brick So it's three on this side two on this side two on that side because that ground level there is a lot higher As you can see this four pink brick showing there below damp And then only up there you've only got two in a bit. So the grounds like this So yeah corners up Alex and running now to his To his heart's content. I'm gonna go up there Trace the bond through and get that corner up and then we're away then Once the face works up, we can just string a line off the face work for the block working side We've cut the insulation back a bit These ours has refurbished about 15 probably about 15 years ago, and they were all insulated on the outside That's why I got the big overhang on the on there. It's rendered underneath, but then they re-rendered it with insulation So we just got to cut back to get our laser line to onto the wall So Alex on that I'm going on that and then Fingers crossed we'll get it up to damp today It's just this kind of Terrain is just the worst for me Absolutely worst, but I'll just keep plugging on and like I said all the flags are ready for the stone to come They're just getting so right go for break get this camera charged up. We'll see. There we go. That's our bond Unfortunately the piece in it That can't be helped. That's our measurement 3.1 That's what we're working to that's what we're given things some serious aim not building regs, but Clenic mission if you go any further out, it's Needs plan permission. I don't get involved in all that Yeah, I was just tracing the bond through for me, but I can't do it But take me twice as long anyway We're gonna write a motor now They said the liver is coming this morning, so there's not much of the morning left So I'm just set up on this corner to get this corner up once the only bond which I do now Works great on it. It's always nice. Let's work break. Just don't forget you got a good five mil back Is it five mil out or back? Let's get back in that way, isn't it? Yeah, so there's just no most joints because some of them are quite tightly together, so Retracing through with the brick face break because obviously the face will go up after DPC Yeah, and that corner is 10 mil low, which I know we could have checked with the laser Which is over there So so easy to have this thing set up just there It's an M12, but you can have that with an old AQ. All you do Dip it with your tape, zoom in on 460, 460, so pick up 10 mil, which is dead easy And then we're gonna carry that. That's three face on that end We're gonna carry the two face round all the way around this way So I think when I switch the razor off and do a bit of normal filming for this one See how it goes I've got finishes. It's on fly because I just need to chop it off Just chuck it back. That's what I was doing. That corner is set right out of mortar Three more bricks to go on that corner. It would have been finished. Mortar's gone Alex has just cleared a bit more of this lumpy shite out of the way, so I've got a nice clear room for the lads with the concrete Yeah, that's it really Delivery supposed to be this morning, so I'm gonna have to give sure ring see what's happening. There's not much morning left It's half past 11, so we chase them up because we need to get this done today They would have arrived so I'm gonna get you set up and we'll hope to go they can get the MOT here Obviously it's looking like a bit of a stretch So we'll have to have to say either way the Sun's gonna be over there, so If anyone's sensitive to the turnbugs being cut look away There's a stone, just the insulation and the cement's going now And we're firing up firing all cylinders We're gonna end up working late again though because this is quite late this is clear room Anyway Let's crack on Dad's up to go again because we are seven blocks short To get that inside finish unfortunately that last course now. I can get that covered up. So it's ready for jointing but So that's gone to Fairwoods to go pick blocks up. I'll get this finished off and just try and Get some stuff covered up now because the rain is here. I forgot what the storm's name is It's a very strange name with a beat Trying to get a lot of you. The plan was to get it ready for backfilling at least so We get these get them blocked in get this front course of brick in And we should be golden to get that done tomorrow rain or shine because that doesn't matter I'm gonna throw in a bunch of stoning does it so I'll um, I'll have to turn you off for now because dad's gone with the batteries and you're about to die so We will then see you when he comes back You know It's just gonna fall so it's a bit of a push, but We're getting there We might be obviously working a little bit late, but we're a bit behind because the materials came late and Alex wasn't well this morning So we had a bit of a dodgy start, but yeah, that is Alex's all Alex's own handiwork None of mine. That's all his Made a lovely job of that. Do you know the inside? Get me in turn and block work up Don't set out For the course to go on all the way around on the internal and then if there's Yeah Nine inch here where the walk door is just to give it a bit of strength Yeah, let's get the new battery in this because I'm five percent sticking on time laps Dodgy start, but I'm very very hard working this I'm really really really fine And it's same as it is once that block works run through that side It'd be ready for slab Because the sides don't need to be up as we always say because you're tamping off the block work Nice and straight and we should have a tap that will go side to side. If not, we'll just 25 to Yeah, the main thing is we've got it ready to get stoned to it I've made a start tricking stoning now that is our roughly our finished height So I think we're meaning a bit more stone than that We need to get filled to ring front of the chun. It's just what it is isn't it? Gonna get filled There you go There go the block work up, and I got a brick work up managed to sneak another two courses on that side Yeah Yeah, so I'm actually sneak two courses on there So I think dad said one more mix should get the rest of this done Which is nice to hear whether he's right on it. We'll see. Oh, so we will catch you tomorrow Fill in this bad boy up Well seems we football. I forgot to film an outro again, so From from the office Thank you very much for watching if you enjoyed be sure to There was a thumbs up and if you're new to the channel you want to see more hit subscribe and tap on that bell That way you'll always be notified when we upload. That's always a massive help and we greatly appreciate the support This has been bit clean with Stephen Alex and we'll see you for the next one