 Hey guys, it's gonna be very quick a little like mini look at this LCR digital bridge It's the XJW01 And it's off eBay 67 pounds something I've paid for it and that includes the shipping It comes in one of these you know pretty sort of cheap enclosure boxes Nothing special there Plugs in the back by a Kettlelead three pin Kettlelead And it's a four wire Which is a little bit more accurate than Two wire It's LCR so that's a inductor past and resistor And it's not so very bad Just for a start off, you know, we'll check the resistor on this is a natural baptism for an inductor I have here from far now This is a 56 nanofarad inductor So I'm just gonna put that on there we go and it's really not between 90 and 100 No, no Henry's Did I say it was a nanofarad inductor? Well, it's not It's Henry So, you know, that's I think I think I need to pull these These leads out on this inductor just very slightly anyway, not all reduced inductance on it So if I plug it into my breadboard, I'll just put it back on again and look as it's gone down there So what I need is 56 nano nano Henry's and that's, you know, suggesting about 80 nano Henry's The accuracy of this meter it looks at it's 60 60 seven pounds. Probably can't expect too much from it So that's not too bad It's a nice little nice little capacitor 100 a thousand like Sorry, it's not really good for it It's a thousand like 35 volts So let's just chuck them on It's in inductor mode So I forced it into that mode so it wouldn't read the inductor as a as a resistor And that which is in auto I'm going to put it to I'll put it to 100 hertz for reading the electrolytic thousand like Okay, so that's not too bad and if you wanted to look at just the ESR Wrong one Just the ESR we would hit We'll have that this one There we go. So there's the resistance There's the primary Indicator there And the capacitance there of course You got this quality thing and the theta It's the angle So if I just go back to Like here And the dissipation So, you know, that's not too bad And for resistance Let me chuck a Probably no values here 9.1 K There's a 40 Oh, there's the 9.1 K And there's also a 40 ohms to go Down there Put this on Yep, this is the 40 ohms Okay, so that's not bad Not bad, not bad at all Last one We got a What is that say? Oh, 100 hertz Pop that on And you can, you know, shift the range to So it's not on auto Checking everything resistance and inductance You can You can switch it So now it's on auto Just for capacitance Auto for inductors And auto for resistance Or auto all around I'm not sure What that actually does If you just notice that This just changed down here And we set auto to there So maybe it's just another Bit of information But I'm not sure exactly what that's for So So yeah, just the overall Very quickly then It's not a very expensive build I'm sure what this little capacitor is Oh, it's a nano farad bar Looks like A 100 hertz, really We should be able to kill a head for that So there we go There's a nano farad That was in pkfarads In 1006, 1007 Okay So that was it Oh, we've got a little tiny one down here This is actually just pkfarads I think it's about 15 or something Or 10, there we go Pretty bad one, really So if anybody's out there Looking for these meters I've got one of these as well And I like this one This is more for transistors And that seems like the way we've got this one Because testing bigger transistors Is just doesn't work And it becomes a frustration But as for this little meter I would say anybody that wants A Four lead, cheap digital bridge For Just under 70 pounds I think that's pretty good I like it compared to what I've had About four other of these Chinese little meters And they all just frustrated me Like I say, those ZIF connectors As soon as you've got some solder on the leads Or something, it's okay if you're doing a little transistor 2N222 2 2N222 Yeah, those type of transistors Fair enough, but as soon as you're going I think there's triax as well, this thing There's triax But as soon as you're checking out A TIP35C or something It's not getting into those ZIF connectors And if you do get it in there The chances are you've been able to measure Anything else in there Which you've done with those little things Is You know, it's Going to cause you problems Anyway, so a very very quick one there Yeah For the money, I'll say Save it with a thumbs up It's not too bad as well I think it uses 0.5 millibots So you can leave it on all day When you don't have to worry about Electricity bowls Thanks for watching