 Ευχαριστούμε για το Βίκη, και ευχαριστούμε για έναν άλλο βίντεο που παρακολουθούσε το Τονικ Craft Kit No. 27. Αυτό έχει ένα τέτοιο θυμό για αυτό και ένα τέτοιο θυμό. Είναι παρακολουθεί μόνο σαν όλοι οι ευκαιρήσεις με ευκαιρήσεις, και πρέπει να πω ότι είναι πραγματικά one of my favourites από τα παρακολουθούς παιδιά που έχουν been released. Λοιπόν, σαν όλοι, θα κάνω τα ευκαιρήσεις για να μπορείτε να δείξετε τι έχετε κάνει και τότε θα σημαίνω να συγχώρω 3 ευκαιρήσεις χρησιμοποιώντας από αυτή η ευκαιρία. Από όλοι θα έχετε ένα γλυτερό σκοπό, έχουν ένα όλο της διαφορετικής κόλουσης με αυτές οι σκοπόs, το ένα που θα έχετε έχει έναν λόγο φόρος και να ξεκινάς το σκοπό, πρέπει να πω το τίπο στον πιστό, να το παρακολουθώ λίγο από τα παρακολουθούς. Μετά πρέπει να είτε παιδιά, κάντε αυτό λίγο από και τέτοι, τότε θα δείξετε ότι το σκοπό θα ξεκινάς. Προσπαθείς πολύ σε ευκαιρία και δεύτερο σκοπό και βλέπεις και με νερός και χρησιμοποιήσεις ένας λόγο φόρο με γλυτερό. Αν δεν είναι ολόγου με τα νουβοαλκοχόλου σκοπό, αυτό είναι έναν μεγάλο σκοπό για να μπορείς να δεις, θα φτιάξεις αυτό το σκοπό των 3 ευκαιρήσεις. Θα δείξω το λόγο φόρο της νουβοαλκοχόλου σκοπό, δείξτε τι φορές θα φτιάξεις, λίγες είναι τα νουβοαλκοχόλου σκοπό, τα νουβοαλκοχόλου σκοπό. Έχω έναν κέντεο σε αυτό το σκοπό και το πόνο πραγματικό που μεταφέριζα και μπορείς να το δείξεις. Έχουν ένα κόμπι κομμάτι σε ένα τόπο και ένα κομμάτι στο τέλος της άλλης κόμπις και είναι πολύ εύκολα να πείξετε τι κόμπι είναι από τα κέντε. Τώρα, αυτό μεταφέριζα πολύ μετά, Βαθμίσεις ότι χρησιμοποιήσεις αλλαγουδιασμένη πέρα για αυτό. Τώρα, δούμε ένα δίκιο στους κομμάτων που θα βρεις, δύο μικρές γεγόρες από ένα στήρατο και ένα στήρατο, θα σας δείξω πως μπορείτε να δείξετε τα χρώματα. Αυτό είναι το στήρατο και είναι called Fairy Wings. Είναι πολύ στήρατο και νομίζω ότι είναι πιο καλύτερο κάθε προγένειο. Και η άλλη είναι ένα στήρατο και η χρώτα είναι η Πινξιασμία. Η first one has a lovely pearlescent look and the second one has glitter inside. You also get a mini jar of glacier paste. This is a lovely paste that you can use directly with your spatula on your project like I'm doing here or through stencils. Now the color is green envy. And here is a close-up look on all the mediums so you can probably see them better. And I'm trying to catch the light for you so you can see what's shiny, what's pearlescent, and what has glitter inside. In the kit you will also get three rolls of washi tape in lovely colors. I'm going to open them up for you so you can see the designs. One of them is a solid yellow. This one has a pattern with dots and the last one has a lovely pattern with flowers. I love the full vibe on this last one. And just like colors you will get your envelope with the dies and the stamp inside. This month you will also get a binder. You get one of these binders every three months so you can stay organized with your envelopes. And then you also get a sticker every month. I always like to stick the sticker on top of my envelope. And then let's take a look on what you get. Now inside you will find the dies as well as the stamp. I do get a sample kit every month so my dies are not nicely organized inside the envelope but they will come nicely organized for you so don't worry about that. Now let's take a look on the amazing dies as well as the stamps that you get for this month. The stamps have a full vibe to them. You get a pine cone, a mushroom, an acorn and you also get these two stamps that match two of the dies and you will see what I mean in an example as well. So let's take a look on what you get with the dies. These are the two big leaves that match with two of the stamps. So you can see that these are going to stamp the vines inside the leaves. And now let's take a little bit about the dies. This is an amazing die set. First of all you get two fairies. I'm going to use them on my examples today and you will see what lovely fairies they cut out. Of course you get the two leaves which are perfect for fall, a flower and another flower with a stem. And this die cuts out a lovely decorative vine. Now let's take a look at the dies. You can mix and match them to create different looks. From window cards to shaker cards to wreaths. I'm going to show you some ideas today. Now the larger of them is bigger than a standard card. If you like to create four and a quarter by five and a half cards this is going to be bigger but you can always use bits and parts of that and I'm going to show you some ideas today. Now this is going to cut out only on the outside of the paper but if you want to cut out on the inside you can use that ring as well. Here's another decorative die that gives you this beautiful design. This fits on a four and a quarter by five and a half card. You can use this die with the bigger and the smaller circles so that you can cut out a ring if you want. Otherwise it's only going to cut out a decorative design on your paper. And finally here is the smaller of the dies. This is a pack of four squares. These are large four squares and you will get 24 of them in the package. They are one inch or two and a half centimeters but of course you can use your scissors to cut them smaller according to your project. And finally let's take a quick look on the cardstock that you get for this month. Tonic Studios has amazing specialty papers so you get samples every month including satin paper, glitter paper and post one in a lovely color combination. And let's start with the first card for today. For that I'm going for a full card and I will be using the two leaf dies. I'm going to start inking my two cardstock here and I'm using Distress Oxide ink. I went with a full color combination and you can see the names on your screen right now. I'm creating my own pattern paper so that I can cut out the leaves and I'm not going to use vintage photo the brown Distress Oxide ink for now. I will be using that after I cut out my leaves. Notice that nothing has to be perfectly blended since I'm going to use those two backgrounds just for cutting out the leaves. And here they are all cut out. I'm going to use my vintage photo to go all around the edges just to enhance them a little bit. And now I'm going to use the two stamps from the set and stamp the vines on each of the leaves. For that again I'm using the brown vintage photo Distress Oxide ink. It doesn't have to be perfect you don't need to layer anything really. It is very forgiving. I switched to the other stamp and I'm going to stamp the other leaves. And now I'm going to distress them even more by smooshing my Distress Oxide ink on my glass mat. I'm going to dilute it with water and then I'm going to use a thin brush to add some splashes all over those leaves. Once you create a bunch of these leaves there are so many different ways you can put them on a card. They can be like one and a sentiment below or three in a row and sentiment below. You can cover up completely a background with those leaves. I decided to create a window card for today and I'm going to use the leaves to create a wreath. So as you can see I'm starting with two panels. Both of these papers are from the kit. Having a touch of the same color on all the elements of a card really makes a difference and brings everything together. Now I'm going to use a smaller circle die on top of my panel. I'm going to run it through my die cutting machine and you can see here the outcome a lovely window. You can easily turn this design into a shaker card if you want. I'm going with a simple window card for today. For consistency and since I have inked up all the edges again I'm going to ink up those branches with a vintage photo. I'm going to place one panel on top of the other temporarily so that I can stamp my sentiment inside and I went with best wishes. I'm going to apply white embossing powder and then I'm going to heat set that. I used foam squares at the back for some dimension and I'm going to stick my panels one on top of the other and now finally I'm going to lay the leaves all around that circle. I'm not sticking anything down yet. I just try to decide how many I need and how I'm going to stick them down. As you notice this is going to cover up some of the design from the circle die but it still leaves some branches to show which gives a lovely element on my window. Now to stick everything down I'm going to use this craft glue that I got from the previous kit by Tonic Studios. I love that it doesn't dry super quickly so I will have some time to move things around before I complete my wreath. And here is the finished outcome. You can embellish it with nouveau drops if you like. I'm going to leave it as it is and here are some close-up photos. Moving on to the second card and I used the two larger of the dies to cut out this lovely border out of black cardstock and I also cut out the fairies which I'm going to use later on on my card. Now first of all I'm going to put everything aside and I'm going to start working on my background. For that I'm working on watercolor paper and I'm going to combine a couple of colors that I absolutely love as a combination. These three oxide inks blend beautifully together. You see I'm not paying any attention on doing a perfect blending but once I add a second layer everything is going to blend beautifully. And when I am creating backgrounds with these tres oxide inks I cannot help it. I just have to add some watersplashes on top of them. I'm going to leave the water to react with the ink for a few seconds and then I'm going to blow them so you can see the effect. Now it is time to put my card together. First of all I'm stamping with black ink my sentiment on a strip of white cardstock. I'm going to use foam squares at the back for some dimension and I have a panel of black cardstock as my base. Now at the back I'm going to use a part of this wreath the beautiful design that I have and you can't tell anything now but you will see that it's going to give a lovely decorative edge. Once I place the inked background at the back and I will be using this die cut all around my background panel to add some more interest so you see I will be using my glue at the back stick a part on one side and then cut off the excess and having this inked background with black details on top it really creates a very dramatic look and I absolutely love the contrast. And here is an example on how you can use the larger of the dies in a completely different way than it was designed to be used. Now I'm using my scissors to cut off all the excess paper and then I can stick that on top of my black panel. You can see that now I have lovely decorative details all around the edges. To complete my card I'm going to stick down a fairy. I have foam square at the back to add some dimension and this way it is completely leveled with the sentiment. Now since this is a card about fairies and a magical world I decided to add some gems at the background to add some sparkly and then once I finished adding all those gems I decided that my background was quite empty and that's why I added one more fairy. And finally let's move on to the last card for today. I will be using the green cardstock and that vine die. If you cut out three of them you can create a full circle and I also cut out flowers out of the purple cardstock. Now I'm going to work on a white panel and I'm going to stick down all those vines so again I'm going for a wreath card in a completely different style. I'm using my nuvo de luxe at the back on some of the leaves you don't have to add it on everything. This way you will have some of the vines sticking out for some dimension. If you want you can double up on the vines for a fuller look. I decided to leave it as it is clean and simple. Now I'm going to add some dimension on my flowers. For that I'm going to use this set by Tonic Studios. It's a great set to have in your stash if you like to add flowers on your cards but in any case if you don't have it you can always use your fingers to add dimension and curl up the petals a little bit. And of course this is a card that I will hand out to someone otherwise all this dimension that I'm adding at the moment is going to flatten up if I add it on an envelope. Or you can alternatively use one of the box envelopes that are available. Now for the sentiment I'm going with best wishes again which I'm going to stamp at the center of my wreath and then I'm going to use my nuvo de luxe glue and start taking down all those flowers. I also added dots at the center of my flowers by using the mini dream drops. You can call this card done at this stage. It's a very clean and simple design and very versatile but I'm going to show you what you can do if you don't know when to stop just like me. So here I cut out some more flowers from white glitter cardstock and I also cut out one of the fairies and I cut it out twice ones of the purple cardstock and one more time from glitter cardstock. I'm going to use my scissors to separate only the wings and then I'm going to stick those wings on top of my main fairy and I added some dimension on the wings before I stick them down so you can see the lovely effect and you can do something similar with vellum if you want. Now I'm going to stick the fairy on top of my wreath to embellish it a little bit more and then I'm going to also finish off the wreath by adding the white flowers as well and I did use the dream drops again to add the center on the white flowers and these were the projects for today Featuring the new craft kit by Tonic Studios I hope you had fun that you got inspired down below in the description area you will find all the links that you need Don't forget to like the video and leave me a comment Thank you all so much for watching today and I'll see you all next time.