SRS Light Reset (cheap, easy)





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jan 29, 2010

this is a video on how to reset the SRS light, most car dealerships charge $80-$120 just to diagnose the problem.... most of the time there isnt one.

what you need::::::

1. speaker wire- doesnt matter what kind but you need 2 strands to make it easy, or just use one
2. MES plug -on the left top corner of your fuse box

ok the step by step

1st- step to resetting your SRS light is to turn the ignition off and connect your homeade SCS Service connector to the MES Plug,

2nd- Turn Ignition on. SRS indicator light will come on for about 6 seconds then go off.

3rd- Disconnect your homade SCS service connector for MES connector within 4 seconds after SRS indicator light goes off. SRS indicator light will come on again.

4th- Reconnect your homemade SCS service connector the MES connector within 4 seconds after SRS light comes on. SRS indicator light will go off.

5th- Disconnect your homemade SCS service connector from MES connector within 4 seconds. SRS indicator light will indicate that memory is erased by blinking 2 times.

Turn ignition off, and wait 10 seconds. Start vehicle like normal and light should come on and go out like normal

and if it doesnt work the first time just keep trying. took me about 5 trys to actually get it going
if you have any questions feel free to message me


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...