 Okay, so I'm going to briefly demonstrate our Biomedical Equipment Life-Cycle Management Tracker Program. So you will open it from the home screen by tapping on the item, and that will open a list of the equipment. So you see you have here a list of all the equipment in a clinic or a hospital. If you tap on the expand menu, you have all the equipment details for that piece of equipment. You can also tap on the small icon, and it will show the equipment image in a pop-up. Now in order to make an entry for that specific piece of equipment, you can tap on the search bar, and you can tap on the barcode icon all the way on the bottom of the unit identifier. That's going to open the search window on your camera. Then you can scan the image of a barcode that you have attached to the equipment, and basically tap on the search button, and that would now bring up the piece of equipment that corresponds to the barcode by tapping on the icon again. It's going to open the actual tracker program, so here you are able to record the installation, record an alarm, record the status, the entire life cycle equipment is covered until the disposal. For example, if I want to record an alarm, I will click on alarm, and click on the plus button, and add new, and let's say I'm reporting an alarm. You can enter the alarm calls, the directive action, you also have the possibility of triggering drop-down manners like alarm was resolved, supervisors not informed, click on the plus button, complete, and that is basically the entry for your life cycle equipment management.