 what's up everybody I have not seen that intro in a long time and I just found it in the stream yard files now it's like I'm hitting play so I apologize if I just blew your eardrums out hopefully it wasn't that loud and hopefully you can hear me and see me and all the things all the things man I haven't played that intro in a long time it is a long time so I'm just getting everything I was just watching tripod's video on this um he walked through like the install and I was trying to get an idea of what I'm what I'm in for you know I have not uh that's besides Brian Brian Vines was here I don't know if he's still here but I did see his video as well but I haven't really watched any videos on this thing this is the bq bq hurricane correct me if I'm wrong on that because well I don't know how to say it uh but welcome to the stream it's Sunday I hope you guys are having a great day I did adjust my mic from yesterday I forgot I did a firmware update um on my mics and the receiver and I realized that um I had it a little hot going into the computer there so I back to down a little we'll see if that we'll see if that's better today or not um let me know in the chat if you can hear me you could I think you could see me because I can see myself so that's always good right right everybody's saying hey Carl Fenton blasto what's up Andrew excuse me Andrew s sanders 3d uh guy the jedi 3dp Scott local maker michigan shan del 3d and Carl Fenton welcome welcome welcome I know there's some other streams going on I didn't know that was happening when I booked this or planned this I just said let's do it um so that's what I'm doing we're doing it we need to get some printers unboxed and I thought what a great weekend to do it I'm going to try to make this one uh relatively fast so I don't take everybody's whole sunday up you know not like all day thing again like we've been seeing I'm going to expand a different chat here that the uh there we go I just expanded the actual youtube chat because when I'm building I'm not going to be putting comments up too much because I'll be building um and I can see more chats on on the youtube one than I can on the stream yard one so youtube has room for everyone amen yes I do go lions uh seems much better today I hope so I hope so um but let's get rocking we'll start off with a drink of sorts welcome to my water again big water fan when I'm done with this one you know I probably should drink this first I have a bubbly that's not in like a any container this one this one will get warmer faster so we're going to drink the bubbly first let me know what you're drinking are you having a water a coffee maybe something even better than that uh but we're going to rock and roll I got my my knife we're going to cut into this thing this thing looks like it's been taped like a thousand times I'm going to point out like how much tape is on this thing uh there's a lot of tape on this thing so I'm not sure if it got opened closed opened again what what happened but it did it had some it had some life before it got to me Budweiser all right all right I grew up in Wyoming and that's what we had to drink you know so I I'm familiar with the Budweiser on the side of the cans and bottles and all that there's like a tagline it's like you used to say like this is the most famous Budweiser beer blah blah blah I used to have that memorized water time for a beer all right cup of tea Carl I love it I love tea I love tea I'm gonna pop this um other camera open there we go we should still be good from yesterday we are so we got a little top-down view there I'll throw you guys here boom sparkling ice water black cherry love it that's why I'm drinking the bubbly I got the bubbly the blood of my enemies I love it I love it blasto I gotta hook up with you I still got that that laptop for you all right let's start pulling stuff out you guys have probably seen this way more than I have it looks like we have a screen here um um box of stuff there are a bunch of packages of stuff now this now that is a filament sample come on bq what the hell is this that's I'm not even entertaining that um that's you know you got a snips I like these snips they're okay well look you got the ducky quack quack doesn't squeak but that's okay we got uh some power an ethernet um I can't believe I can't believe that a bowden tube that looks like capricorn but I'm guessing isn't um and a bowden coupler uh the user manual of the year here um tiny little user manual and oh the mystery of earth is in this package uh I don't know how many knew this but at earth micro center of all places had one of these and they were putting it together and they were trying to figure out for the longest time how to mount this little uh sensor here and even the bq wrap that was at that earth never saw this printer before it had no idea that was kind of crazy um don't forget this moonshine I love it apple pie moonshine um all right so this is the uh filament colder monster ultra orange sunrise all right um here we go that's what I was looking for you've been ducked yes tap water okay okay that's okay I love water so I mean I drink a lot and I should drink more there we go yeah now that's secured all right in the next one what do we got here looks like our x gantry pretty solid got the uh the hot end fancy fancy schmanchi kind of looks kind of looks fancy oh looks like our upright here okay okay so this is this is the upright looks like we have a cover on the lead screw here probably for shipping it's uh only single z z motor and and um you know that's interesting a lot of a lot of these printers went to do them now so not sure if that'll matter not on this one but we'll find out coffee I love coffee I had coffee already today I had a uh uh I made an iced peppermint mocha at home with four shots of espresso true story true story all right so that's what we got in the box so looks like our base with our bed looks like a flexible pei sheet um little on off switch here I'm not sure if you can just turn the bed on and off maybe interesting um again you you guys have probably seen way more of this machine than I have so you probably know a lot more than I do I do know that nero unboxed his up and put it back away um and I think someone earlier in the chat said he just didn't want it to work so there's that um launched it launched it yes extra speed and wobbles um seems well packed yeah yeah a lot of foam well packed uh mac and cheese with diced tomatoes for lunch that sounds uh decent not a huge mac and cheese fan unless it's like a really crappy craft macaroni and cheese kind um they were dual then they cut some more cost now they're going back to because they realize their mistake oh interesting interesting um thank you for that all right let's jump into this looks like we got a little bit of a build not too not too bad from what I saw um they definitely cut costs so far because this isn't terrible we'll check it out I'll do a little top down so you can see what it looks like but I mean that's really you just need a quick start guide right there you go um put the gantry on the uprights bolt interesting what the heck note note I wonder if we're gonna have to either bolt that in or loosen it anyways I'll have to read number three install the z-axis motor to the gantry I mean it appears that it's already on the gantry maybe it's loose or something um then we got number four putting it on the machine with four bolts and just a couple more steps so this shouldn't be too bad shouldn't be too bad I'm gonna set that up there uh and the first thing we're gonna do check the eccentric nuts with nero they were loose oh yeah we'll we'll definitely make sure that we check all of them good point thank you thank you I think sanders is it sanders 3d I think you said um he didn't he didn't want it to work so he packaged it back up I'm not sure what that means I'm guessing it's because he's the he is the uh clipper guy right and and the Voron guy so here's our little wrench they just kind of dumped everything out on the table here so last though we need to see some more good projects man it's been a minute it's been a minute since uh you put out like a a sweet um cyber deck or something you know all right let's see where we're loose might as well do this quick before we get it on oh that's eccentric nuts are only on one side and if you're looking at the front of the machine here they're on your left side so there's only one side this this little wrench here kind of fits in there it's just a reach kind of interesting the bed is moving on the plate a little giving the illusion that it's rocking more than I think it is but interesting it's not bad no not bad no what's up party people Tyler's here kind of lost your mojo we got to find that we got to find it and bring it back I got to say that it's not loose here at all so that's good and it rolls nice so that's not bad not too bad so far so the first step is to put our x access on the gantry um and it's just gonna sit on here you know what though now I see what we have to do we have to take the oh that's why I'm learning quickly we got to take the motor off for the z put the x gantry on the z gantry but we have to take the motor off to put it on so this is a step that I kind of understand for shipping um did you see Blasto's Gameboy yeah Phantom Printer awesome awesome check out today's short I posted a short a little bit ago and uh it was printed on that Prusa mini and it's a uh an alien oxalotl an alien oxalotl so we had to take the z motor off I don't know if this is better or not so let's just do this we had to take the z motor off here so I can slide the x gantry onto the z gantry and that's gonna go on like this so I'm just gonna do it this way so I can show the camera okay maybe kind of weird doing this uh one handed but um go on please there we go it's a little better there we go I'll check these eccentric nuts as well but they seem like everything's rolling nice and it's really smooth so we'll take that now what makes me sad is that I have to find a way to rest this on this is not my favorite give me one second I got idea got an idea I'm going to grab a piece of that foam because now I want you to rest this down and put the the motor back on but then you're resting it right on the hot end so in the intro it's not tall enough really that is funny I'm just gonna rest the hot end on here then I don't care I would rather uh protect the hot end then make this harder on myself okay so could you post one about upgrading the bond tech oh yes I should do that um two nights in a row I don't know about privileged privileged is a is a word I guess I wouldn't call it the right word but I am just literally you know just back over here there's a little grease on here little grease I didn't grab I should have grabbed myself a couple paper towels I suppose cursed then that's probably better yeah let's see where those holes at okay I'm pretty close right there let me see if I can tighten these in if I use the right one left it over here so if you guys have seen videos on this machine what do you think what's the consensus of the the community on this thing 3d medic vents what's up I want to build a voron do it I um when I was at IRF I was talking to David Randolph about it and he said if it's your first one he told me to plan on 50 hours 50 hours and I was like uh okay that sounds good um 50 hours though is I'm just seeing how it's rolling on the z here looks like it's doing good good good good as I drop it right after I say I don't want to lean it on the hot end right anyways 50 hours is a long time and that's time that I don't have right now so I just bumped my mic sorry about that so you know that's it's I know a lot of people have built them and they're they're awesome machines I mean they're they're phenomenal and when you're done you feel so connected with that machine because you got so much time into it um including print time I don't know about that I don't know about that I think he said 50 hours to assemble full assembly wiring dialing it in um tuning it all of the things is he told me 50 hours but some people do it in 20 or 30 you know I guess I'm talking about your very first one if you've never done it before now if we could talk to Taylor or Nero and he could probably tell us different if you were if you were working with somebody like him and he could help you it might be even faster to walk you through it so next I'm going to put the gantry up on the base here it looks like we're going to push screws through the bottom and essentially these are going to sit like most of the new printers do it is not how it's kind of grooved kind of the the base kind of has a little like spot where it's supposed to sit as you know from all my streams I like to pull one end a little bit off um upgrading the mini is easy and necessary in my opinion um yes I mean my needed it so that worked out for me I can't I can't talk about anybody else's but you tell you it was worth it for me print time is a hot minute yes I'm still tuning mine nice so I mean there's a lot of that time there's a lot of tune time into one of those machines and if I'm being 100 honest right now I could buy a $700 bamboo lab p1p that comes tuned and ready to go but it's not the same it's not it's apples and oranges because you you're building a volron to get the experience of it you know 400 millimeters but it's yeah it seems to price the jack way up 40 building I build my first one at 45 hours and the second in 35 so you save 10 hours that's awesome okay one side's on I mean that's that's awesome and it's uh it's cool because if you're going to build more you get that experience right let's see that also size yeah when you stream it double oh yeah when you when I stream anything you better triple it because I talk too much like this but that's fun that's what I like doing I like spending the time and talking to everybody and and uh getting to know the community better and it just you know the communities are so awesome um what's up yeah I um why are you not going in I always try to start these by hand and then twist them in with my trusty t-handles gotta love the t-handles um but this one does not want to this one does not want to go in you got to stop and read the chat yes well that's the fun part I mean we wouldn't be live streaming if we didn't want to stop and interact with the chat right so that is the fun part but yeah I would love I would love to build a Voron just to do it and say you know just say I did it there's so many people are doing it now that it's not like ooh you built a Voron anymore it's more like holy you took the time to do it you know and in my opinion it's a lot of time it's a lot of patience and all the things and when you're done you deserve to have an awesome machine this is the bottom line you're gonna put that much time and money into into something that you're building yourself now there's some sweet kits you know LDO has some awesome kits out there where you don't have to source everything which was another you know crazy amount of time in the beginning where you sourced everything ooh full-size keyboard ooh I like that I like that just build a full cyberdeck body in one go that would be cool all right what do we got next we're gonna put the spool holder on this one what do we need we need uh t-nuts hey look they do they do this though you know I don't know if we could see this it says step two so they walk you through the steps with the bags which is nice or it says two step I'm not sure I'm not sure the new thing is annex printers no build guide just just step file oh god I'm out I am out have fun I hope everybody has a great time building I just don't I just don't have time you know between this and my my full-time job and my two and a half year old I just don't have time I'm sorry that would be one heck of a build on the channel though yeah that's funny the companion cube at mirf maybe I probably saw it and I probably would remember it if I saw a picture of it but that was a long time ago man 30 people here that's it huh I guess it is one o'clock or whatever time it is 130 on a Sunday central um and this this is not uh by any means in view um not by any means in new printer so there's that too right this is interesting so the spool holder apparently goes like this it's an interesting interesting path oh maybe it's like this because I'm looking at it behind you um all right I'm just gonna keep going with it so weird maybe it goes forward definitely backwards okay so this is in the back like this like this yeah yeah yeah yeah I'm looking at it um 230 eastern nice two step two is a beer touche step one build the printer step three there are step two beer step three enjoy the printer you built step four realize you built wrong printer because there's no guide I think we're good all right spool holders on probably even in the correct orientation um um step three step four is the screen uh wait no step four put that on step five put that on step six put the screen on that's not a tight shirt oh boy oh boy see I don't know if you meant tight like tight or tight like you liked the shirt but either way but either way I appreciate it R2 on a bamboo that's what Sam did R2 on a bamboo there's an elf on a shelf and R2 on a bamboo all right this is I gotta show you this oh let's see the cow really I mean the plastics on this thing and it's like all disheveled and I'm willing to bet their scratches when I take this off let's see if you can see not not the end of the world just interesting interesting hey don't you have one of these Sam's Sam has one I almost wore my edge of desk shirt today I should have I would have known you would have been here or my oldie desks shirt I already sent Sam one Sam has this shirt or at least he has yeah I think this one I think this one or an edge of desk shirt I'm not sure I'm pretty sure he has both yes all right we're going to put the screen on here and Sam does have one of these what do you think of it what do you think of it let's pop out this camera so you guys can see we're gonna pop it right here um what scratches oh boy oh boy why is there scratches we'll find out I just I just you know it just doesn't look like I wish I could you could kind of see this better here it looks like it's like they just threw the plastic on quick and the screen under it I could be wrong the screen under it looks like it could be rough and the box had like a bajillion pieces of tape like a lot of tape so there's that so do these matter there's exp1 and exp2 does it matter which goes where there anybody anybody maybe they're labeled are they labeled they are labeled who they're labeled everybody let's see if I got them on the right one one two good nailed it nailed it I think out of the box they should have done assisted leveling to dial in the bed okay uh Sam was there he'll remember the fun that that um microcenter was having it at uh earth trying to figure out where in the heck that sensor was put in they're supposed to go and all that stuff my hair probably in the way here where are you hold there you are well I have another video coming out as they sent me a second z easy upgrade five inch screen um and the dd extruder and an enoscope for the nozzle this thing it's a bed slinger and it'll be faster than the ender great awesome I know what that's code for Sam all right I'm excited I'm excited because I haven't played with clipper yet clipper with a k thanks to brian vines he helped me fix that it's not a bamboo though an endoscope yeah yeah yeah why well where is the nozzle going what not sure what that means oh he's got an endoscope coming for his nozzle number seven looks like we plug in all the things so we're gonna start doing that I'll flip this around let's see what we got um maybe I could do this again here we go so we got a nice amount of cables they did send me a snips if I remember right tripod said he didn't get a snips in his um so there's that you didn't see the trolling in the chat lol uh watch what I don't know what that means Shane oddly the team they teamed up with e3d and have a reval upgrade for this weird I do um they did offer me a new hotend and I did not respond yet I wanted to to play with this first and see how that went um so it appears I mean their instructions on how to plug everything in not so good but I'm gonna go with I mean is there any I don't know I can see that the hotend plugs in up here and it's clearly has to go underneath your gantry but I don't see is there like a way to run it up here like that or anything there's no I don't see any um zip tie areas now I do see that they show zip tie tie down areas but I don't see like hey run this up here kind of thing playing with clippers fun Shane's feelings oh Shane let's see so it looks like we can do that plug that in there and then there's a zip tie for strainer leaf up in the top there and then this all of these thingamajuggers um get to plug in up this will go here again single z from the factory single z right um let's see there's a little bit of that the cable from the bed gets stuck behind the printer that was not great um all right so we have an extruder which is e check we probably have extruder little extruder which probably means filament runout sensor then we probably have x and x which would be the motor in the end stop this is definitely bringing me back bringing me back to my uh under three days but I can't see where this plugs in ah there you are maybe there we go so there's that all right well I think that's everything we're gonna do some uh cable management pop this back over here maybe a couple of these zip zip ties these are thick boy zip ties um if I was I was asking if it's imperial version of the software I don't know did you take the bottom off yet there's a cool diagram of the board printed on it I have not probably not doing that because I want to actually get this thing running and printing and never have been doing clipper before I don't know what that's going to take no idea I'm hoping there's something on the card we can just fire it up but if if only my favorite Englishman would have done a video on this and I could have watched it ahead of time oh I am excited I'm excited to play with clipper at least get an idea I won't need to guess the IP I have a smart network I'll go figure out what it's connected with all right where else can I zip tie you beaches oh I look at this I think this was supposed to go through the uh little hole here look at that I saw that in the picture all right who else do I zip tie something is there any other zip tie spots I mean we should you should be zip tying this up you want to just dangle in around you I guess here's a zip tie spot there do you know does anybody know can we just zip tie it up like that I'm done with that it's not and I'm not really sure who they're aiming at that oh got it watching a master at work yes this isn't beginning um interesting it's not might be a new record 35 minutes it's almost ready yes I mean you're pretty much ready I'm just messing around with the cable management right now because I I want to zip tie this but it is probably a record I'm just thinking if I can zip tie these cables up it gives it some strainer leaf right posh me a freaking bone here Scott we're doing it we're doing it right or wrong it's going right there making decisions that's what we're doing people now where does this go this just gets floppy that's it can someone in the chat tell me what do what do we do with this do I zip tie it like here maybe it gonna lurk hey lurk lurk lurk zip tie to the Bowden tube not happening I didn't get the Bowden tube on yet did I didn't here it is I hate zip tie and stuff to the Bowden tubes I guess all right so we will screw in the oh can you see right here whoosh kind of not really but I'm screwing in the coupler let's see is let's see if the edge tech can do what Nero couldn't I don't know what that means what's that mean I think you can see the IP on the screen if you want Wi-Fi there's a touch of tweaking you'll need to do okay let me know what Nero didn't do and I'll figure it out probably not he's he's he's way further more advanced on Clipper than I am whoa that pushed way in there all right and then this will come under and go all the way into the end of the world down there check I really hate zip tying really hate zip tying stuff to this I'm probably gonna zip tie it there probably what I'm gonna do you didn't get his printer to print what now that's crazy crazy on this record stream this record setting look at that I'm all the way up and apparently I can't zip tie there because it's pulling like a mother so let's not do that probably should have pulled it all the way up before probably zip tie that together not as much as couldn't or as wouldn't if it doesn't work out of the box that's on bq yeah that's that's true story the same thing is gonna happen here if it doesn't work you know I usually as you all probably know I take these things like like I'm somebody who's never played with this printer before or a printer because if you get this in your brand new what are you gonna do and in my case I've never played with this or a Clipper printer before so it is like that so you know when I'm doing one of these streams it's got to be the instructions it's got to be detailed because in the long term I've never touched one of these and I don't know what I'm doing and on stream it's just going to look bad if I can't get it working right so there's that first clipper printer yes clipper version as you guys said all right this is good enough good enough we have attached the boat and tube mounted the gantry installed the filament bracket installed the screen we wired the things cable ties for management that is literally a step cable ties for management install the ptfe tube push it until it can no longer be pushed what that's how they work um they didn't give you any clips so there's no clips to keep your bodens tight but we should be okay so now we flip the page um tuning now there's a tuning page to check all your eccentric nuts okay number two make sure we're set to uh your voltage all right solid doing us a solid there on the back there's a fancy schmancy see if I can get a shot of this um I'll lift it up here so it's a little better there is a that sticker there tells you hey dummy make sure you are doing this for your country we're doing it for the country why did that need a film on it how am I supposed to get to this if I can't geez cheese and crackers all right so we'll flip that over wherever the heck it is in there or we won't flip that over see it says do it but what uh where in the heck is the holy it's way in there I bet Sam didn't have to do this part did he lucky that's not gonna work I have to get a one of my T handles here geez and I can't see it so I'm gonna go with I hope it switched looks it looks like it's solid Sam you're lucky didn't even have to go through this pain I'm putting it back on there sticker is officially back on okay so we swapped that over we still got our duck um number three I guess we're firing it up from what I understand we have to make sure that the SD card is in because the SD card holds the firmware I did get that out of a tripod's tripod's video I'm as the SD card in where's the SD card guess we have to do this part too huh yeah I mean I don't know if the plate's any good but it looks fancy let's see it's fancy hey uh anybody out there is the little switch on the bed for the bed heater because I see a little switch up on the bed turned it appears to turn the bed on and off um let me know if that's for the bed heater because I didn't read instructions yet wow that's weird okay good I think we're close there is an SD card in so I'll leave it in it's already inserted it's to change change the bed it's a switch that heats the middle versus the over at overall zone okay so does it tell us in the instructions that nope platform leveling insert filament okay I don't see that anywhere any instructions um which way is which you know center or a whole thing so how would I know that I guess that's a good question huh good question big big cue if you're watching this you got it you got to explain this stuff you know people that have never touched these things or don't have an audience like this when they're putting it together how the heck are we supposed to know I did see there's an online manual so I'm hoping I know if I watched that that would require me to watch his channel um no I did actually I just watched his R2 D2 video R2 on a bamboo that was a short he did um this was it was clever okay so have a quick drink let's plug this bad boy in to see if it smokes I am too subscribed I'm subscribed on my other other account so I don't want anyone to know oh that's funny I'm subscribed on the dl shit is great oh geez I mean that stuff is great sorry if you're family watching yeah yeah I do lurk I'm not gonna lie I do that a lot mostly because I'm watching while I'm doing other things and so I just lurk let's oh yeah let's see how that screen looks dirty whatever um so yeah I definitely lurk I'm a lurker especially during the week when I'm working I definitely lurk when I work I just throw your butt in walk around with YouTube in my pocket and we roll like that okay so I think we're ready to fire this thing up you want a closer look to see if it's you know then wait 10 minutes while it boots up what what here we go if I can get out of that okay here we go we're gonna fire it up yeah powers on BL touch is going in and out uh starting the SD card must be read must be ready before powered on blah blah blah got it the firmware might be I was looking to see if there's an upgrade I mean an updated firmware I'll see what I got and then I probably won't mess with it we'll see we'll see so I'm reading the um while this is booting on and you guys have got a really entertaining view of the screen booting up um you can't even see the screen because you can't hey it looks like it's booted up so there's that I gotta say no fans or anything running it's dead silent right now okay so I want me to go to control home all manual level clear mesh home all manual level clear mesh okay here we go uh do you want this view or do you want the side view let me know in the chat I'm gonna get a drink you let me know in the chat side view front view the BL touch will merge when it's that powerful it definitely came out with some force um hey yes uh you'll hear well you'll hear the hurt hurricane when the fans come on nice front view the view that does not include me man if we were if I wasn't live streaming I have a really good comeback but this is a family show so there's that front view okay I got some we're doing front view and I'll pull this camera back a little so it wants me to I just got to keep it sideways so I can see see the screen if I can talk that'd be amazing right I mean what works here oh you click it hey it's got a light on the handle that is fancy control uh home all whoa simmer down simmer down now how do I know if my gantry is straight it literally went up high enough to push the brackets on the top Sam does yours do that it went up and hit the plastic brackets in the corner of the printer there that's interesting from an angled from an angle top to printer we could do that I could do this that's not really going to be great I can do this still and bring it closer but that's okay yours didn't do that huh that was odd it smashed right into these maybe I just had it too high and it had to come up a little to come down we'll find out metal extruder with a yellow spring that commonly I see in the bed springs okay so that's a beefy a chunky boy spring in there that be all touch just definitely hit so here we go we're going to go to manual level clear mesh manual level clear mesh it didn't give me any feedback so I'm hoping it's doing it at least it's working so far so good it did more than nero's did what what did his do what's interesting is that yesterday I did that stream on the inter five s1 and there was another stream going on and his didn't work either oh his home to upwards probably that's that's funny that's probably a firmware thing z is backwards maybe or the motor all right left now it tells me to go through let's see five let's see left front get some a4 paper and do some manual leveling good let's do it whoa that's some fast stuff not even close to getting paper under there this is the this is the best paper I got for this right now and it's not close to getting paper there we go but so in in clipper can I baby step someone who knows you tell me can you let me know is baby stepping a thing close enough right front keep this thing under there whoo jeez it's definitely a I need a piece of paper it should go get that leveling card I used yesterday um jeez this one is in there yeah this thing's just spinning or something there we go yes you can yes you can good good good I think they send you the good ones I don't know about that I have had my fair share stuff that doesn't work on stream and then the company depending on what company it is a lot of them never talked to you again or they wonder why you don't take your stream down and you're like well you sent me a bad product so there's that all right next so first one that hasn't been like crazy tight look at this 58 minutes in we're leveling a bed that might be a record and that side's way way loose priest dark man right here this is perfect this is what all the people in those Facebook groups were going through when they buy this printer yes that is true you haven't watched his ender three videos from a couple years ago he has grown are you talking about size wise because I definitely have grown size wise from my ender three videos oh come on now this one's way off come on this is just a weird piece of paper to do this with but it's funny who who uses the instruction oh yeah that's right me good enough okay next yes I go around twice it's a thing happened oh knowledge wise yeah that too that too all right next I've got I've grown I've grown size wise too yes Luke's guide was awesome I should go check that out I'm sure he added stuff I should do some more should do some more whoa that one's a little tight now I think we're close enough for the first print and we'll do the center I'd say that was close enough so we go back now um bed mesh and save I'm guessing that's the next thing clear mesh run through it uh okay now it tells me insert filament do I not need to do the bed mesh and save thingy let me know Sam Sam or anyone out there that has one um that's funny um do I need to do the next step on the screen says bed mesh and save so I need to do that no maybe not that's on a different screen never mind manual level I went through all that so probably good we're probably good right I don't think it saves the clipper though might get you might get a first print out I'm gonna home it let it do its thing I mean the next step here is to add filament insert filament so that's what we'll do next a little bubbly if you're just joining let me know what you're drinking kind of a thing we do I'm drinking some bubbly I'm about to toss this one and I need to get some filament really quick so give me one second I'm running this way whoa whoa whoa preferably not PETG right yeah no um all right one second I'm gonna get a good roll from the archives deep in the depths of the archives here hey look at that those are some sweet prints on a bamboo printer quick everybody make some jokes or something I don't know we're going we're going straight orange I like it we're gonna be able to see this I should have put some sweet some sweet Kenny G on for you I'm going with some orange today I probably I mean it says load filament cut the filament tip pointy hold down the extruder handle yeah I didn't even tell me to heat up anything yet so there's that is there anything here temperature filament yeah mode filament fast I don't think it does anything I'm guessing I have to be heated up and all that right all right I'm just gonna do what it says doesn't tell me to heat it up shake that desk I will I will I'm gonna go find like the strongest sit stand desk ever and then change my change my uh desk out orange crush kind of it's an old Arian orange PLA I've had this for a while let's get this spad boy loaded you see me rolled in okay she is loaded we are on that's literally it insert filament okay there is some wi-fi settings so I could potentially connect this thing to wi-fi right I mean I'm that's the whole idea so it says if I want to go to wi-fi settings wi-fi settings oh I see I got to set up the SSID theoretically got it got it got it got it so I just got to change the config and set up the uh my network makes sense that makes sense there's PID tuning there's calibration sd card what we got here test there's a test level gcode a circle a boat seriously if I print this this is a benchy you guys I said this yesterday if it's a benchy put it's a benchy falling off desk locked and loaded all right here's the deal why does spools have chunks taken out of them what oh yeah I may or may have not dropped it it has PID PID tuned somewhere should I do that yes I have did I say bamboo all right some of that fancy poly alchemy I love that stuff but copyright yeah it's a benchy I know it's so frustrating when they just they put boat you know it's a benchy give credit to the stinking people man designers deserve it should I do a PID tune first or should I just hit what do you think just hit benchy and see what happens I didn't tell me to do anything else all right let's do it we're going for it I don't know what's happening what's going to happen but I can tell you this if I'm a new user I just hit go I did it we're doing it it's probably heating up I'm going to grab a paper towel quick because I have not wiped the bed down it looks like it's trying to heat up the yeah the plate is going to 50 then I just launched all this foam over here right in front of my door give me one second I'm going to grab a paper towel grabbing paper towels grabbing paper towels you guys should have just saw what I did you're gonna laugh so hard you guys would have laughed you just saw what I did so I went to grab said paper towels walked out I opened my my studio door here and forgot that I have boots um I have boots sitting there that I wore over here because it's cold and they're just like little uh I don't know work boots or something just so I don't wear my tennis shoes in the snow definitely opened the door saw them there and jumped thinking there was like an animal or something sitting at my door don't use IPA why not why not why not the bed will smear what does that mean who doesn't use IPA on their bed all right now I might do it just to do it what is this thing doing oh we're going uh the bed's at 50 we're getting we're heating up the hot end to 200 it looks like right now so yeah I said try it do it I will I'm gonna because I can tell you um most people use IPA to clean their beds am I wrong let me know in the chat am I wrong so this thing smears hey what what about this thing what about the sensor thing Sam there's no instructions about this to the paint there wrecks the bed oh great great I do have some instructions from brian vines back in the day that you know told us how to do do I need to do this this thing stinks heating up I want to heat up the whole bed right yeah why not I want to see how it works so this paint wears off and ruins it great when I get clippers set up what does that mean I need to actually like go through a setup there's the where's the instructions basically uh let's see number one Wi-Fi settings that's all it tells you like this all right bq bq whatever um so far I mean the printer looks nice it went together very fast and easy even talking on a stream like this um the challenge I have is your instructions like I don't know anything about clipper this is my first clipper printer right and number four says Wi-Fi settings you don't say take the SD card output into your computer you don't say any of that stuff you just show it luckily I know what that picture looks like oh what's going on here looks like they used a black filament to test this maybe yes I need to tune it what the printing not very good apparently it's probably a little too close to the bed there by probably I mean it is hey there's the orange how do I uh tune it maybe the offset let's see if this helps nope that did not help is this going down that did not help still excuse my face in the maybe what the heck is happening here there's no way this offset is this far off is there oh I see filament now we're gonna let it fly there that's crazy I may I may or may not have been way too close and by that I mean I was we're gonna let this flow we're gonna see what happens we're printing well what sucks to for what I understand now um is this your first printer yes funny funny um no what's interesting about this is like the manual doesn't tell me tell me I need to do anything else so if you're saying I need to set up clipper and all that I guess I while we're doing this I'll jump on the manual on the line and see if it's any better but let me see if I can get you guys a even better view here there's that and I think we're going to see what happens there's a two yeah I mean we're going to see how long this goes because this definitely is not what the heck this definitely isn't going to be a a 10 minute benchy or a 20 minute benchy right now I have an ender three congratulations it's a miracle an ender three with not good printing currently so we might have to shut this thing off and do something different I have an ender three oh geez let's see what happens currently I have something all right well you see it for I mean it's it's printing so there's that can't hard hardly see it because everything covers everything so it's up it's gone we're an hour and 15 in I could have easily done this in 30 minutes 20 minutes tops probably I wasn't talking everybody this is not going to be a fast benchy uh I don't know anything about this thing so let me grab my um mouse wind it up to 200 I should wind it up to 500 um there's an online manual I saw and I'm going to go see if it's any better and if it's not any better then let me have an issue because how am I supposed to know what I'm supposed to do with this thing if it's my first clipper printer and there's no instructions on where to go from here um so there's that I mean I see some videos but I didn't watch them all right here we go I'm gonna I'm gonna share this screen with you guys wind it up to 200 do it get that IPA out yes read it in chat yes yeah yeah yeah so let me let me move y'all down here and let me share this other screen and show you what I see okay this this is the manual you know I'm actually going to do this so it's even bigger for you guys there's a packing with tuning um cura oh they use this cura okay didn't know that tuning of the nozzle height okay inserting filament okay go to tune see I didn't say this in in what I have so that doesn't help so I didn't set my Z offset so it was not even close not even close by the way so that's not in the quick start guide that they give you would have been helpful would have been helpful so that's the Z offset here's cura installation I'm guessing it'll tell you how to get the cura settings add the printer walk through all this stuff there's a beat there is one huh change the name change the size great so if we come down here printing don't remove that printing from micro sd great transfer the gcode um printing via the wi-fi network great here's where we set up our wi-fi the password we find the ip address we collect we connect the ip here we go here we go that's where we connect micro woo micro probe calibration quick start not a manual hmm yeah super uh super slicer is better using a retrog basic for speed okay so there's like all all these probing things here oh is this where the probe thing is supposed to go here or something it really doesn't tell you anything about clipper does it oh wait look at this is this where you install the uh on the printhead I see okay you install it there x axis yeah mm-hmm y axis you install it on here okay never would have guessed that never would have guessed that at earth we definitely didn't guess that y calibration great where do we put it on the y okay I'm guessing y is just the same spot okay okay printing too fast printing too slow blah blah blah okay so basically what we need to do now is set this thing up on the network on said wi-fi or whatever and and uh see what clipper looks like and check it out right what time we got we got a little time this thing is has has lost it has came off it's come off we're off the rocker look at this well that's good because we were about to stop you anyway okay let's stop this print somehow tune temperature filament led uh how do I stop the print tune no is there a way to stop the print control so I could turn the steppers off how's that gonna help me but there you go it's not gonna move anymore oh my gosh all right I am I am shutting you down hurricane good thing I found a shutdown wow so that was fun yeah it's a special the benchy floats this is one that it actually floats okay IPA is your friend I keep hearing this I heard um I'm gonna put the card in my PC yes we're gonna try to set this thing up on the network so we can web into it and all that fun stuff let me get all this out of here so there's no mess we do have a mess with this garbage because it didn't tell me to adjust my z offset so now we have that garbage sam told me to use IPA it'll really be great for the bed card can't be removed while it's on I if I didn't see tripod say that in his video I think I wouldn't have known that um North America voltage try IPA in the corner should have put a boat on the raft yeah yeah yeah all right am I good to shut this thing down I don't know sure I just did so it's it's down now I'll get this off maybe don't care right now all right hey so so on the bright side the printer was up and go it imprinted kind of um so there's that we are gonna attempt to get this thing on the wi-fi quick quick that was a good one quick and uh go from there so listen I I don't know what to say because um instructions go a long way there's a duck I mean we just we we need the instructions if you've never done this before you I would be so mad right now I would be very upset or at least very frustrated because there's no instructions to tell you to do the z there's no you know yeah all right try IPA in the corner you've got to put IPA in the bed and yeah an IPA for the operator I thought you had to shut down from the screen I did hey I hit shut down um and then it just sat there on the screen and then it said shut down on the bottom so I shut down oh gosh funny funny jokes here I followed the instructions it's all right real quick I'm going to follow the last instructions and see if I can get this on the network it says go find the system.config file there it is we're going to edit it um yeah I'll have to look it said shut down on the screen so I shut it down hey I'm over it can you see I'm really upset right now there's my what is my wi-fi oh yeah that that is what it is okay password I love Sam one two three four I don't know if I did it right we'll find out in a second I prefer a cocktail uh you know quick search or not instructions no but you need to at least you gotta at least in your instructions give all the instructions a beginner will need to go I mean you could have included this the offset part but I didn't see that anywhere in the instructions I mean I'm just saying like I understand a quick quick start guide is not quick start guide is not the full instruction manual totally understand that um unfortunately what I don't like is that they didn't even put the z offset tune you know to set that all up in here and I didn't do it because it's not in here a normal person wouldn't have done that because the instruction wasn't in here and now I printed too close to the bed so maybe I'm harsh maybe I'm not but you know it is what who duck you got a little soft on the bottom oh it squeaks tripod mine squeaks I think he's watching but Crowley sent me a sonic pad good luck dubbed out yeah I John I'm with you especially if they're calling it like the first printer to come out with clipper and all that stuff or whatever they're calling I mean you've got to have instructions for people who probably have never used clipper before um I have no idea if this is going to connect to my network let's just let's go see if I have an IP I don't yet maybe it needs time yes you're supposed to get started quickly but at least give me the instructions you need for the basics you know getting started quickly hopefully I put the right password in I love Sam one two three four but I'm not getting an IP anywhere yet I don't know how long it normally takes but it's all zeros right now across the screen which doesn't probably not a great thing right I should go watch the real Sam Prentice's video maybe we should just do that right now in the live or news just go turn his video on and watch it you know I couldn't I can't watch it though because it's not any cubic you know there you go indie nation I like that idea I still have nothing as far as an IP address goes Sam let me did it take a minute or maybe I didn't put the password in right or maybe it's not set up right don't know yeah I have nothing still I will shut down her a can so right now on the bottom of the screen it just says shut down her a can let me show you not going to do a bad sequence again oh you'll see it like that are you shut down her a can do I just let it sit here until it shuts down or what might take a minute box it up and send it to Dan maybe I will run a power cycle what do I do do I just let it sit like this like that's the other thing in the in the quick start guide it does not tell you you need to do this so there's that and and so like hey by the way dummy when you're going to shut this thing off go to shut down it doesn't say that anywhere I know what he I know what he means John I'm I'm just being sassy today you send it to Nero just like fan mail it to him is this thing supposedly shut down or does it just sit here forever Sam or do you just like shut it off because fans are on right now and kind of let me know because it's been sitting like this still just shut it off I mean someone said I think Shane said it needs a shutdown sequence screw it we're doing it bye bye now everything's everything's flashing let me just check the password I'm sure it's I love Sam one two three four but I have been wrong in the past I'm going to have to go watch Sam's video and take pretty sure that's the I am pretty sure that is my password hmm and that should be my SSID unless it doesn't like a space because I do have a space in my SSID let me just double check it I connect to my router real quick Booyah grandma right I guess I could put it on my guest network but it still has a space let's try it let's try it maybe it doesn't like the space it's not watching chat so I probably should okay unless I need to change something in this config to tell it the Wi-Fi is active ethernet Wi-Fi check interview router IP address 888888 or 8.8888 little DNS ethernet zero Wi-Fi zero hoping that's DHCP we'll save it check the get check the chat real quick I'm missing anything yeah guess my password it's it's I'm telling you it's I love Sam one two three four put double quotes around it whoo yeah hey Sergio how you doing so I changed it to my guest network let's see what happens eject format disk no I'm just joking I'm just joking just in time Sergio I did print kind of now we're just trying to connect it to the Wi-Fi so we can actually go see what Clipper looks like and then and then Sam told me I need to put IPA on the bed which I'm going to do in one minute here while the boot sequence is going up we're getting the IPA out he told me it's really good for the bed it helps I'm doing it let's do it let me flip this camera over and we're gonna do this why can I not twist you don't answer that okay I'm doing this just want to make sure you're getting too much glare okay here we go it's booting up now again Sam told me use IPA it's a it's a combination of 5 and 2.4 it picks whatever it wants to use it might be so I have a space in my network name that won't be changing I guess I could change the guest one just for the heck of it but I don't feel like I should have to do that yes too funny getting spicy spicy all right here we go little a little 99% IPA and then we'll just wipe it in there Sam he said it was gonna run all over and ruin the bed it didn't ruin anything killing me killing me that looks fine it didn't it didn't ruin it do you have double quotes around the SSID no I could I'm disappointed I'm disappointed Sam said it was going to ruin the paint we're going to have a smeared mess everywhere and nice like my sister just chatted me my cousin my cousin my niece won her hockey game yet my niece is playing hockey which is crazy okay let's go see if I got anything real quick hey wait wait wait I got an IP not showing on the front page but I did find it booyah grandma booyah grandma I don't know if that's still a saying I don't think it is for me uh let me connect to it and see what happens first besides the fact that it's taking its sweet baby Jesus time here holy moly yeah it definitely didn't go to that IP address grandma got run over by a reindeer yes walking home from my house on Christmas Eve so I cannot connect to this uh IP address I don't know if it's real or not let's just go to something check this out probe steppers I'm just looking through maybe it is on the front of the screen now which is awesome I wonder if I can ping it not ping that I know why I know why I bet you I bet you it's because I put it on my guest network oh that's funny um you know what I'm wondering I wonder if it's because I put it on my guest network so I can't ping it from my normal network um yeah well this mine has a space as well but it did work so now that I know it works I'm gonna shut her down again I'm gonna let it pretend to do a shutdown sequence that I've never seen before yet and um I'm pretty sure it's yeah I'm pretty sure it's because I put it on my guest network um I'm shutting it down I don't know how long that sequence is supposed to take if anybody knows uh let me know I usually never put anything on my guest network it just didn't work on my other one so while I plug that bad boy in I am going to confirm the password of my regular network go to edit oh so you uh fancy clipper people can you let me know in the um oh maybe I forgot an s that could be that could be the challenge here um could you let me know in the chat what I'm gonna have to do when we connect a clipper like what what's the plan here this is gonna work I think I forgot an s um possible we're gonna find out in a second save close eject let's not break this sd card great format I'm just joking that's a bad joke all right stl Denise what mine works on guest weird weird what about Denise's channel that's weird watch Denise's video that's still Denise I'll check it out um when you get in a clipper with that t-shirt up not happening uh you should be able to open a browser window yep as soon as I can connect to it I will do that um I said guest up just for printers got it okay so we are we're rolling here we are rolling let's see what happens dumb people all right IPA on the bed got it got it got it yeah he's always trying to get people to go topless okay now I think I got a real IP address it works it works good now that time type it right though boom I'm in all right let me share this um with you guys and and see what's cooking here I clearly present present item in tada I got clipper and stuff thank you offset maker lab for being a member I'm gonna do a lot more for members uh coming up here in this 2023 all right I'm in now what guide me oh wise ones oh how about go to the man manual and walk through that do I need to do that is that still a thing uh let me let me get that manual quick there's calibration there's bed leveling what do you think machine what someone says update all I don't know what that means okay I'm in the machine I don't know about that okay upgrade everything I don't know what upgrade everything means update manager I'm guessing you mean this nothing is there to update up to date up to date unknown unknown up to date invalid I don't know what moon raker is but uh there's that click on the on the blue click on the blue circle arrow I love it I checked for updates see what this says invalid should I do a soft recovery this is blue right here wait you know what I just thought of something um it might not be blue this uh the the tv that I'm watching looking at this on is definitely got a color issue um do a hard one I'm doing it I don't know what it means but I just tried it oh got it oh look we've got update so is there nothing up to date then or I mean there's nothing up to date is there nothing to update if this all just says unknown or whatever got it we could look at the new firmware I wouldn't know how to put it on the card but you know there's that got it definitely uh yeah definitely a lot of learning to do here because yeah this is the first time I've ever seen any of this so there's that is there a marlin can be oh for this yeah oh look I got some stuff in here it says dirty invalid now there's some update stuff here so we'll see what happens nope I don't work with linux so there's that too super fun super fun well it's doing its thing I don't know how long it's going to do this but it looks like it's doing its thing that's funny john true true he's used clipper before so that like that's the thing I mean this is like saying oh I'm the newest thing right I'm in clipper and I'm using clipper which is great but then you're trying to market it you're trying to market it to a whole bunch of people who've never used clipper before so I understand there's a learning curve and you got it you know just like anything you got to learn but without instructions may have to re-flash the MCU after updates oh boy oh boy it's still doing things recovering right now now there's like other things that say update now I can see it in the back in the background and one says invalid so maybe that'll refresh I don't know one says dirty phones taking a or playing ticking off have fun hey offset have a great week and thank you for being here is this going to take forever if I if I do these updates is this going to take forever is that what's going to happen here I was just going to send this benchy to it again or whatever we need to do or tell it to print hey look it came right off here I was afraid I have to scrape this off and this this bed stuck so well or lack there of that it just came right off it's hard to see there that's funny they're usually pretty quick I thought he was joking by Ryan oh boy I mean I imagine it's good to keep the things up to date and since I got this printer I'm sure there was updates right I'm I mean I'm like there's probably a hundred percent chance there's an update since I got this printer um so there's that we might have to do a tune a little z offset checking or something I need to clean it but someone yelled at me for trying to use hey look I got stuck on the the cord got stuck but in the back like someone said it was gonna I'm doing it if it ruins the bed it ruins the bed I just have to be careful I'll have to take off to go look at Denise's pictures all right 30 minutes what let's see the thing is if you don't slice a new file with the updated speed settings you won't have you'll have an ender three when you work the clipper settings upwards the printer will be faster got it I'll have to look it's still doing things it's downloading a pillow currently downloading pillow so there's that so do I need to go do I need to go set up a slicer do I need to walk through that um or something I mean does it have to be sliced through this how's that work I thought this was just a console right so or if you want to print that boat again we can play with the settings live yeah yeah we could we could do that I'm assuming um I would I would assume I have to set up a slicer which I haven't done yet and I would assume that I have to slice it and then put it on here with you know better speed settings or whatever um but we could play with settings live I mean if anything sticks to the bed we'll be okay the rat rig config work with others Sam okay hey yeah Sam you have one of these shoot me an stl file like slice a benchy or something and shoot it over with the settings then I don't have to do it and waste everybody's time because we're at almost two hours so I'm gonna not going to go a ton longer the starting ng codes are really all you gotta do they're uh look like um nice John I like it use the v-minion version all right this thing is still going it's recovering moon raker installing build dependencies started that's where we're at now so it might be a while I have no idea preparing metadata come on let's go I mean something's dirty whatever that means I'll send you a file let's do it what's your email it's like we're not even friends can't even believe you that'd help you there's 47 people watching me watch installs happen because someone said do the install oh yeah there was a hard uh a hard recovery or whatever start gcode I know I know what's starting on gcode art but thank you if you get stuck down or I can help you out okay when it stops it's still going yeah it's definitely still going here it's doing this it is doing this yeah it's painful all right I agree with David oh start start gcode different on clipper sorry about that okay got you so that's what we're still doing I don't know if it would be faster if I just plug this thing in the USB drive in and did it that way but try again connection failed it just totally uh bombed or something let's try something happened it might have disconnected in the there you go see let's see I mean it looks like it's still connected maybe it's doing the update and it can't connect or something let's see what do you think should I shut her down and reboot that's uh that's about where we're at here let's just for argument's sake that's pinging still it's rebooting the clipper MCU okay so just wait don't do anything this is rough I can ping it oh I got it I got a message from Sam David said it's rebooting the clipper MCU I'm about to just do a shutdown and reboot let's do it see what happens what's the worst that can happen I brick it and then we're done shut down hurricane it says right now shut down hurricane well I'm shutting it down I have a little bit longer I want to see what Sam's file does maybe we'll just boot this thing up and print Sam's file if it if it connects again ever um it better be a boat Sam I like your second email I should have uh I should have showed that oh you sent me the picture of what it did to the bed too huh nice nice and I won't show anybody the news you just sent as well I'm just gonna throw it out there all right we're booting back up yeah well that was fun that was amazing thumbs up for a lost dream let me know if I'm back I should be back so this is uh not connecting me anymore even though it's pinging let's see let's see connection failed that's all I got AI took over I'm back I know I'm back I closed the tabs and one of them was stream yard um yeah I can't connect back so not sure what I'm supposed to do there now can I put the print on an SD card and then go from there Sam kept us I bet he did I bet he did um I can ping it I can see it on the network but I cannot connect to it currently cannot connect to it currently so I'm gonna do another shutdown and I'm gonna put Sam's special benchy on here and we're gonna fly it oh like I said I can ping it I can see it that way um you're back for sure I wish there was like a shutdown sequence like countdown or uh I don't know anything all right good is it gonna be like the same speed settings and stuff Sam yeah or or what I could do is can't I like put the firmware I have to do some research but can't I do like um the firmware it's better be a benchy Sam trusting you what am I gonna say can't I do like the firmware update through just with the SD card in or something it's got to be a way to do that right yeah I bet it is I uh it's it's from onlybenches.com all right we'll see how this goes and I mean the majority of this stream is pretty much over we built the thing it comes with a 32 gig card by the way a 32 gig sandisk card by the way not even not even like Chinese knockoff card so um it's faster nope it's faster I don't know what that means uh anyways it's booting back up now no matter what happens I'm gonna hit play on this benchy and see what happens hopefully the zops I should probably do the zops that thing just to make sure and um I did copy it to the card already and I'm just gonna turn it towards me so I mean I mean we built it we saw it extrude some plastic it did some stuff some things oh yeah I was gonna look at something good little guy went down for a nap at a good time today um so it's just kind of getting booted back up should I do the zops that thing I'm a jigger z test the z screw it let's print we'll do it on the fly we're doing it we were this far in and I gotta go soon so here we go I will I will work on it on the fly I'm gonna kind of get this thing I'm gonna get this thing uh as as low as I can and and hopefully we can see this thing printing uh and hopefully it doesn't ruin everything right we're gonna find out supposedly Sam sliced this so currently it's heating up to 68 degrees uh and 140 so here we go give a shout-out gym when you jump back on it I don't know what that means I'm on it it's a big base for that build point yeah yeah it's about normal now um got it music dad I put put it on the bqb you at bx okay great I said this good luck with that like you would set up clipper in a normal way that's funny like I know how to set up clipper at all anyway when you just back on the printer I don't know it's still heating up we're going to 68 now on the bed instead of whatever they had it set at right I don't know I flipped the little switch those are red and a blue light on now dun dun dun so what do we know so far set up well I mean building it was pretty easy um they really give you almost nothing as far as what you need to do for clipper there's some in the manual which will have to go through okay great um both elements are on now got it got it so if I turn that off only the center is on so just the red is the center got it we're at 61 62 um so we saw it extrude some plastic we threw it up on the um we tried to connect to it is what we tried to do we ran an update and now we can't connect to it and main sail apparently craft the bed because that's what it was up moon raker whatever that is um what sam said it was earlier craft the bed we can't connect to anything now and um now sam pre-sliced a file I have no idea I mean I can't confirm it's not something bad and we're just messing around so I appreciate y'all being here whoever's still left and I'm just hoping that maybe we can get a a some sort of any kind of print hey it's actually probing now that's you know nice their their stock one didn't I don't know if you noticed that earlier I definitely will probably I probably definitely I'll have to adjust the offset when it starts printing it's about I just tried to connect again it did not connect right before I'm doing this okay I want to make sure we got what is going on why are you Lucy Goosey in here so we got it going now I'll click over to here when we're ready well that was interesting oh it's stuck that's not cool again it got stuck the cord got stuck in the back for the hot plate the power to the bed really so there's that all right I'm going to switch over to this and I'm going to go around front here and play with this tuning while it goes so now it's going up to 205 um it's it's pretty okay kind of fast you know ish heating up 180 now 190 now 200 now 205 we're there now it's supposed to be doing something maybe it overshot 205 and it's that 208 coming back down maybe it didn't hold a temp long enough or something start do something oh there we go I'll just get down here to offset get this garbage out of here huh we'll see what happens it is connected I mean it's it's it looks like it's sticking it's rolling all right let's see this let's see this magic clipper speed you can do it all right any questions before we get rolling because I have a lot this is pretty much the inner three with upgrades people usually do to it so far yes that is a plus clipper remember this benchy has one hell of a raft sam what the heck is this I can't see it first layer hey we'll see what happens I popped a brim on it got it did I say raft that meant because someone made a raft joke about a benchy earlier all right here we go sam popped a brim on it a pid tune at a later date absolutely after all the updates probably a pid tune I knew it was syncing yes yes so here's the thing like like Shane said it's kind of an ender three with updates kind of I mean ender three v2 we'll call it it's still single z it's quiet I mean it's definitely quiet so there's that it's moving it is quicker than an ender three I would if I didn't have a bamboo printer I would be happy with the speed it is so hard uh let me know what you guys think it is so hard now having those bamboo lab printers looking at a benchy printing this slow so there's that um slinging that bed like a champ yes speed and sling yeah I get it I get it when it starts going through these when it actually starts doing the infill and stuff maybe it'll start cruising doesn't appear that's the case yet not having to compile in marlin is a major bonus okay okay I mean I'll have to probably learn how to do whatever I need to do from the sd card because I can't connect to the machine anymore um fruit you know via wi-fi it won't let me connect so there's that not sure off to figure that out I mean it's going here I mean this is how fast it's going right now come on man whip it up to 200 all right let's do this let's do it I I mean what I see so far looks good you know all right that is 200 we have we have we've hit 200 now ssh in and update moon raker got it infill 120 external 300 cool I mean it's going it's it's quiet enough um it's moving this is at 200 percent on the control panel there so I don't know what quality will be like but hey um how do I ssh into a uh into clipper hopefully it's an it should be enabled right oh excuse me got it so I gotta I gotta grab putty here we go bq uh at the desk it's not shaking no no no it's not ed see yes power shell power shell can ssh let's do it let's do it so sam says ssh um bq at ip password bq let me pop open my my power shell let me double check that ip address did get it right let's see what happens here are you sure you want to do it whoo move y'all I mean not close that window again we are deep into this now I mean we are we're in the weeds you're so far in the weeds but here we go this is what I got word like this is I shouldn't necessarily have to do this not knowing what the hell I'm doing when I first get a printer territory but I'm in now what I mean what would you like me to update or how do I update it from here this is where I'm at clearly not a linux slash uh you know clipper person yet but hey you never know you might get there here I just want to show you this it's cruising cruising anybody in the chat you know I should I should have just brought sam on here hang on let me let me quick show this oh drill telling you only fans what all right chat where are we at here where there's like six of us watching still okay 38 uh we are we are intrigued how do I how do I do whatever I need to do or can it even be printing that's another question like can I do it while it's printing pseudo apt upgrade moon raker I wish I could I wish I could copy this wait if I go to my other chat can I copy that message yeah move y'all grandma I can do it while it's printing we'll find out oh can I paste in here there you go unable to locate package moon raker oh no we have until this benchy is over to figure this out otherwise I gotta go I gots to go I got stuff to do what are we thinking uh you need internet access ah well I'm connected I can ping it do I need to put the asterisk or something let me look at let me look what Sam typed we know Sam I don't know if the asterisk is meaning anything or not but here we go that doesn't mean anything yeah oh whoa whoa well what is going on here besides yelling at me I love this so much yeah I have so much log type this is amazing uh let's see this is amazing the best dream I've ever had what is happening right now I just have to type it something's freaking out I need to show this again um better than a depth yeah yeah yeah you have a special character at the beginning I do well there is like a that dollar sign thing let me just go back up here we go I backspace there's nothing there but that last character is I have you guys on my little screen right now and it's tiny dash y okay this is a good conversation for getting corny discord yeah yeah yeah I don't like I don't know what what that is to be fair but I see what you're saying all right the following packages were automatically installed and no longer required blah blah blah okay good do I do now do I do what you did when you said the first time no yes yes now do I go back and type that uh um go here we go up oh come on do the uh sudo update moon raker I'm just guessing do the sudo uh update moon raker one now I think you're saying type is I'm learning quick that's what I got this is what I got so you want me to type ls and see what happens see what happens all right I see moon raker dash env at the end of that benchy's rocking still we're rocking with the benchy here you go it's cruising along now what is like directory got it got it got it got it so uh do I need to do like the update moon raker thing or we think we're good did that did that uh get install get slash y do that all right let's show you let's go jump over here I'm trying to connect to it just for argument's sake nope still can't um via the ip cd moon raker then update um to get into the moon raker directory do I need to get into the moon raker directory to run that that um command that sam sam gave me earlier yes yes no no got it I still need to update it so should I just run jeez I don't know why it does that I run this one do what happens I'm unable to locate moon raker package local package moon raker I mean so so I'm in the directory uh moon raker dash env check it back to the main directory I'll run uh get update thought we just did that though no no no let's see what happens was not env okay I probably have to get out of here right we're gonna just type all of the commands what am I doing run and see a good point um run colon get update let me put that screen back on there you go watch me type like a dummy over here um not a thing I just not doing anything doing that get space update didn't do anything either no run I didn't type run that time I just say I just typed get update no quotes didn't put quotes in it either I love it hey this is like this is like a community troubleshooting gone wrong but not really gone wrong wait who's who's calling me sam you're calling me on messenger I gotta go soon but you want me to change the I need to figure out who's yeah someone told me to get out of the okay I'm in moon raker get update nothing not get just update this is amazing this is like a get poll all right all right well we have a benchy kind of so that's okay pull up your uh let's see ls-la here you go that's what's in there all right so that's what we got so far we have um this let me let me do this boom we have almost a benchy a little bit of stringing and by a little bit I mean there's some stringing but it's cruising it's cruising along I may have to revisit the uh the whole um clipper thing here when when I have more time I was hoping to let this benchy finish quick but you know we've been fighting we've been fighting this for a minute so why is there a pack why is there a package and why it can see uh let's see there is a package so why can't it see it I don't know what that means uh oh you're talking about in this directory no idea no idea I imagine this is part of the 50 hours of tuning uh when you build a boron when you don't know anything about clipper plus um something clipper update helper helps clipper update help helps the different ways to install it got it that should reinstall it what should help me out and tell me or tell me what should like is there a command should I run a command here to reinstall it or we have a few minutes left here so ping me no sam's chatting me got it I got your message sam so um so it can't I mean I can ping it just for argument's sake so to ping in that way I set the command ten times look um let me look let me look not not this one right you're talking in update moon raker this one yes yes this is true I'm assuming you said update moon raker I could try it from here here oh yeah ice watch whipped off that again damn it there we go this is like we're waiting so I did update moon raker and it said um not it's not found command not found but so that's what I got uh cd scripts hang on typing on the wrong thing all right let's try that all right I'm in cd scripts forward slash oops right that wrong dot forward slash install dash moon raker if I spell it wrong let me pull up the bigger chat oh there oh geez what am I doing hey by the way good time to announce that tomorrow in hot makes we're giving a bunch of stuff away forgot the sh so what should it be like type I don't know where to put what what that means so anyways tomorrow hot makes we are giving away what we have an x1 carbon with ams we have all sorts of cool stuff yikes sudo apt install moon raker should I try that no it might be by tomorrow can I do that from the scripts file music dad I said file in that folder maybe maybe maybe sudo apt install moon raker I mean I'll try it I'm in it otherwise look at that it's doing something I did that again unable to locate package moon raker so then um gene said forgot the dot sh where do I do that any directory okay after install moon raker okay got it got it got it let's try that again huh so dot sh after um oh weird some of my messages aren't showing up that's weird I'm not blocking any so do the uh dot four slash install dash moon raker dot sh nice yeah still nothing here all right here we go then she's looking good kind of if you if good means a lot of stringing so it's doing something reading package list that's it there we go all right real quick there you go there's the benchy this is riveting tv but uh you know what I should do is just get sam on a um uh you know on the stream with me or somebody and just like rock through this or something but not right now it's going through all the things currently so here we go there's this we have e benchy oops rolling so that's good this is annoying this is the annoying way to update the software by the way great countdown to explode yes yes yes yes um the next six hour stream right well this thing is just going to do its thing um this benchy is close to being done um but I do have to get going I in the next couple minutes uh I should have been gone an hour ago but I've been messed around with this stuff for a while I mean it's printing it's got a lot of stringing going on here but it's printing yeah sam sent me um that behind the scenes there and I'm definitely gonna have to figure that out look into that here there's your benchy lots of strings but it is printing so we got a printer assembled it's printing we've talked to clipper the last hour and a half probably would have been better to do that from scratch probably um but this is where we're at don't turn off during an upgrade yeah I didn't turn anything off it was just sitting here it was doing the upgrade on the screen in the in the console there and it just said a lost connection so that's that's how we got here uh but that was like an hour ago uh mean old PID yeah do a do a PID tune yes I didn't I promise I didn't turn it off during the upgrade it literally just said a lost connection and that was it unless it wasn't done but I'm pretty sure it was just sitting there um not gonna lie benchy looks stringy we'll do a PID tune like Sam mentioned we'll try to get uh all the other stuff going it's not looking the best here it's not looking like the best uh stuff but we're doing okay got it so maybe just leave it sit forever and let it do it all right so here's here's something it says there's a new release of PIP available uh here let me just do this hold down new release of PIP available 223.1 to update run this should I do it I don't know if I can copy paste it oh I can't yeah don't rock the boat try try to open the web page all right I'll try to do that first I will try I will try that first good idea yay I can get in we're back now should I run that run it someone says run it let's do it oh that's the manual doing it let's see what happens duh I don't like that it just randomly pulls my screen up that bothers me why you gotta do that here we go so um in the chat let me know should we should I go back to that like machine tab like we did and then if there's any updates run it or no so much I'm not doing it now I'm talking like in the future future Jim talking to chat because I gotta get going but it is doing its thing oh it looks like it's successfully installed PIP uh 22.3.1 and then Jean says yes do it so go back here not when it I'm when it's done printing clearly go to update manager and see if there's anything the update looks like there's a couple things and something says dirty so there's that and then clipper hurricane whatever says invalid I'll deal with this when it's done printing just don't restart midway deal deal deal deal yes off stream for sure run it leave it do its thing got it got it is there an update all or do I gotta go one by one like you know I'm saying after print of course yeah yeah yeah it is close it's it's just to the roof so there's that I'll give you another shot of it I gotta I gotta get going I'm uh I'm running way late today but that's where we're at now it's just uh it's just doing the roof and and it looks rough I don't know if you can see all that stringing and stuff but it's pretty rough at the bottom usually okay there's an update at the bottom update all got it I'll check out what Sam uh sent me to with that whatever that um this is there's a lot to learn about this clipper thing huh is it okay let me let me ask you this is it worth learning all this for this printer that is a good question I mean it's nice to know it and learn it right um but is it worth is it worth learning all of this for this printer I guess it is because I'm learning and that's what that's what matters all right I gotta get flying this thing is close to being done it's at sea says no man what Sam sent will be a big help I should um go see what this is before I get off because you know what's gonna happen I'm gonna jump off and be like hey what the heck is this um but I'm not gonna go through this right now so there's that oh that's not gonna help me there you go close this thing's close Sam says no it's not worth it for this printer got it github follow download uh let's see for downloading a script got it interesting here's instructions for downloading this script it's necessary to get it installed cool I'll check it out uh otherwise I'll talk to Sam and say Sam how do I do this because I'm sure there's like a lot of stuff that needs to uh you know happen um it's stuck to the bed with uh with your with your skirt there Sam it's still rocking and rolling it's did the bridging at the top and now it's gonna work on the roof there to be honest it looks pretty rough as far as all the stringing and stuff goes but we do have it cranked up to 200 so maybe that has something to do with it um yeah is what it is so when this is done printing stopped um yeah the easier way is just have Sam log in and do it I love it we will be printing another benchy in a minute not happening um oh interesting well thank you so it's good to know it's good to know so like if I go to the dashboard here I can see all the things I can see the temps and all that stuff it's only printing at 195 maybe that's why it's strange uh anyways um there's a console there's a tool head speeds it's at 200 right now should we crank her up um nice sounds good thank you Shane here's some macros miscellaneous I just cranked it up to 391 percent let's see what it does 400 percent why not I don't know what we're doing here um speed factor it's almost done all right I have a feeling there's no questions we know where we're at the first benchy came off the bed Sam Prentice sent me this one to to try because in the middle of a update it decided it was not going to work anymore I shut shut it off and maybe I shouldn't have according to gene I should have just let it ride for a while um so I'm going to do that on the next ones for the next for the last hour and I don't know a little over an hour or however long it's been we've been playing around trying to get it to update you guys have been awesome shooting me the commands over to do so we did that and um that's where we're at so now what needs to happen is this print this is done you can see this benchy here there you go and all its glory or not it's not terrible a lot of stringing other than that not terrible not terrible uh we will see if the IPA destroys the bed because it might um yes that was a slow benchy it doesn't tell me how long it took but yeah when I'm used to a 20 minute or 17 minute benchy that was slow but this it doesn't look bad a lot of stringing again like I said but other than that um that's awesome nice nice um cool well thank you everybody I really appreciate you being here and hanging out this long it definitely didn't need to be a three hour stream we could have been done in an hour and 20 minutes ago probably but it was fun I learned some stuff I now know what I need to go do and hit that update button and make this thing do updates and then walk away from it leave it alone until it says it's done um so that's what I'm going to do it looks like my little guy is awake from his nap and so I'm going to go uh hang out there for the rest of the sunday here and get ready for tomorrow's hot make stream we're giving away a lot of stuff so we have an x1 carbon with ams we have um stuff from king gubby designs we have stuff a price from polymaker $500 for a for a 3d printer that I won at IRF and I'm paying it forward during the stream tomorrow to somebody out there so you can order up to a $500 3d printer free thanks to polymaker so what do we have a couple of filament dryers and we have like some $50 off printer coupons anything on their site any printer on their site even if it's on sale you'll be able to toss another $50 off if you win this so svl svl 6 would be amazing price with another $50 off so so come hang out tomorrow we're going to have a lot of fun oh at th3d we have th3d stuff as well we have an easy abl and some new filament um I try to remember everything we got but we'll see you tomorrow night hot makes 6 p.m central as far as this thing goes it printed it built pretty fast record time probably and this stream was like an hour and a half longer than it needed to be but it was fun thank you everybody who helped I really appreciate it you guys have a great rest of your day or night um I know at sam it's like six that's like 10 p.m out there so uh anyways have a good one everybody we will see you next time and we'll see you tomorrow on hot makes bye see ya