 I Tell you one thing brand of this cooler come to the front. It's what buddy. It's cooler That's the cooler. Yeah 88 quart Three compartments cut board comes off a table down there. That's someone you was showing us. Yeah, that's pretty neat I'm pretty we left ice Donnie and I Come back to strip is still had ice in there. Yeah If that moves we see last year would have been a cow when we was floating on that river, we'd still be there We was nine and a half miles from the truck floating The moves stands up 20 yards in the swale Bobby Halls up shoot they I'm hauling at him. No. No, don't shoot. It was just a little tiny spike ball But that would have been really bad if we could we had a two and a half With four of us It's still before sunrise in the morning And Brandon's climbing on the roof to get a measurement of the rafter length and also the angle Where the two different roofs come together so I can run out to the Amish and Get us a metal roof one 88 on the rafter make it 191 Just three inches. That's what I'd go done. Okay Because I'm pretty sure that paint when that pan lays in there, Joe I think we're gonna gain like another inch or so. Okay 191. We're gonna go This one we can't For a pencil yep Foggy one this morning foggy and dusty I've been on the road a little bit over an hour now. I've got a pretty good head start this morning I'm heading down to get the rest of the metal for our roof now that we know what the length of the pitch and the dimensions are for the The lower side of that roof so a couple hour drive. I'm gonna show up the Amish before they open Hopefully they can get me right through they kind of said that they could put a little rush on it today Because Brandon and do be gonna take off sometime midday tomorrow So hopefully we can get a rush on that and I am able to turn around with a load of roofing metal roofing Before noon From then I'll be back in I hate to not be in there while the guys are working. I love working on that camp and that cabin But hopefully they get a bunch done. Hopefully I'm able to get my job done out here and Get back in there as quick as I can so we can get this done this weekend, but Leather tight the boys are finishing up framing in the gable wall and Hanging the gable overhang and also gonna trim that out at the same time It's kind of slow work, but it's work that needs to get done and they're tackling it in a really good manner. Meanwhile About a two and a half hour ride and I arrived at the Amish where they're making metal roofing in Smyrna, Maine It's called Kauffman metals. They do one heck of a good job and real decent price We did the one side yesterday and this side we had to figure out after we hung our rafters and got everything together so I go in and The they already knew we were coming and knew that we were in a little bit of a pinch for time So they said they could work on it while I wait All right, really good news guys. He said he thinks he can get that cut right out in about an hour so we're gonna First things first I gotta go get to Cedar That'll probably take close to an hour to do and then I'm gonna try to pick the boys up some Amish doughnuts here the glazed doughnuts were pretty fantastic And then look at the store for some metal piping and stuff Donnie's building the gable overhangs That we haven't already assembled He's assembling these out of Some of the only lumber that we bought for this job We figured it'd be a lot lighter and a lot easier to handle and hang With the kiln dried stuff. So we bought some two by fours for this and he's making those. They'll be light sturdy and Of course, it'll be made perfect since Donnie's making it Now it's time to prep the metal roofing We've found over the years that it's way easier and it looks a lot better to pre-drill your holes So that way to all line up on the roof And they look good that way and it's a lot easier than the self-tapping ones that Sometimes tap easy and sometimes do not tap easy for when you're on the roof so the boys are gonna stack all the roof panels together and Drill them all at once with a marked-out pattern and it'll look a lot nicer and be a lot more efficient for the mounting process Shouldn't even have to drill that top course. Oh, yeah start two feet from the top Because we gotta drill the cap in from the top there on the last row Don't really need it When your metal roof and the first piece is by far the most important piece It has to be square and in line with the eve or the gable overhang To come out right at the other end if you're just a quarter a half inch off to start it'll add five to six inches off at the end and you're fighting it and The bottom pieces will never line up. So the first piece is always the most important Usually takes the most amount of time to get it lined up just right We're gonna be installing a wood stove in this camp so the stove pipe needs to go out near the peak and in between the rafters that has to be installed now and We have a roof kit that'll go through the metal roofing and also support the chimney pipe Everything that we needed Yellow let it go Red I finally made it back and it's time to board up the south facing roof So that way we can run a little roofing over Finisher's Another big big giant day doesn't look as big as it did yesterday, but it sure is I'll tell you that Good a lot of compost on a lot of different angles But the boss said we can kick off or we got a half hour to try to get a rough grouse We're at the beginning of the season. You don't see as many but awful tough spring on them, too So there's not as many but we'll go out looking for them anyway But we got Donnie in tow. He's looks pretty happy back there. He's sitting back there with Elon Musk So here we go. I just realized I haven't eaten all day. So I stopped at the Amish when I got the roof and picked up some peppers for the steak sandwiches and Picked up some of this sharp cheddar buggy whip cheese they got right there And it's not half bad. It's a little warm. He's been sitting in the truck all day, but It's not bad to put on a cracker Even even warm. It's not the worst thing Donnie, what's that bird on the left right there? What's that bird on the right right there? They're all looking birdie right now, Stevie Rockbird Yeah, what a warm piece of cheese. Oh, I love it. Thank you. I thought it was still good warm He's been to me I'm pretty sharp. There's crackers if you want something too Crack up