 We'll continue with the next lap and we'll do the following. So in this case, we'll start the HEPs. So you don't have to download anything more any new. Just have to start the webs, to synchronize the webs with your application. Then to go, I think it's a fifth or sixth page. Fifth page, I think it's AI Datalog. So there is a menu so you can also press on it and then select AI Datalog. Then you will have to select the audio. Because what we want to do is to add additional audio sample. Once it's done, you will have to add a label. Because here what we want to do is to add a sample and we want to label it since the beginning. So we'll have to add a label or select us if you already have created one. Then put a name, so in this case indoor, outdoor, you can use your own name. I mean just for today because what we want to show you is the principle. All the tools is running in this case. And then you have to select it, once it's been created, so indoors. And then start to log and don't forget to stop to log. Because as I say before, we just have one megabyte memory. So that means after one minute, we'll be over. So it'll be before. So if something is not running, what you can do, because it's depending what you did before. You can press the reset, in this case, it's better. And then start this principle. We are at the capture stage and we will try to capture and label information using the tools. Okay, once it's done, and if you have no issues. So the things is recorded on the quad SPI. So I know the goal is to drag or to capture this wave and this Excel file. And therefore you will need a second cable. And this is, it will use a USB on the go staff. So please plug, first plug the USB on the go on your PC. And then at the prompt, you will have to put this commando. So USB space start. The goal of this is to mount the USB storage. So you have another storage on your PC and then you will be able to have a look on the quad SPI directly. So once you have record one, two, three samples, then you can plug the cable. And once it's done, you should have a drive, additional one. And inside the drive, you should at least have a wave for the sound and a CSV file, which is Excel file, including the label. So that means putting the link between the label and the sample you have done.