 Okay, guys she better 1,000 here today We're going to make this junk Look like this Stay tuned. We'll show you how to do that. All right guys Today we're going to be installing this Z line Range hood up here on this So this what so but the first thing I got to do is You know, I've got to put this up here of course make sure you're Your electric shut off, which I will do that here in a minute But in order to put this up to hang that Our range hood I'm gonna have to cut this out some more. It needs to be repaired anyway And I need to find right there is a stud So I'm good there and another studs over here, so I'm probably just gonna have to put one right across here But first I need to get this cut out and I'm gonna do that and once I get that cut out It's just dry. Well guys, it's nothing. I mean, you know, nothing fancy going on here I'm gonna move this stove. I'm gonna get on a ladder get that cut out and I'll be right back with you guys What are you doing monkey? waiting patiently You've waited three years you can wait three more days Okay, all right, so that's what we want to do guys. She's gonna help me out and Do a little filming maybe but I'm not gonna worry with cutting that out So I'm gonna get my wood cut and we'll get this cut out get my measurements get my wood cut get this cleaned up and ready to go And I'll be back with you guys. So Hang tight. All right guys. We're back. This is what I've done so far. I Cut this out. I had to put a plate in here two before I'm sorry two before and I'll play for this plate To screw on now the other ones there was already one there So I put one one here so I can get screwed into and I put my See, can you see it? I put my box up in there that well I got to do is plug it in and we're gonna lift this up here This over here is gonna need finished as well But I'm gonna do that later because we're gonna put something here some kind of lighting over here But we're not sure what we're gonna do yet And I'm sure that I may have some finishing to do then so that's what I'm gonna want to do this here Now we have this set up Now you can hardwire or you can plug it in now. That's why I put the plug up there So I didn't have to hardwire This just screws on it's self-explanatory. So I didn't show it. There's a little rubber seal that goes on there but just those six screws that go around there and then This goes up in there like that and then this will go up inside That hole there now this pretty heavy it's like 40 pounds so I'm gonna get monkey to help me hold it and I got to start Get these little tiny screws in there and get in so you can watch a little bit of this, okay? That way if something happens, we will have it on camera What are you laughing at? No, it is positive I said if it does which it will not I'm sure all right. Let me make sure I got my screwdriver screwdriver All right, are you ready? I'm gonna have to have you on this side Well, you can't be scared honey you ready Okay, just back in there Yeah, it'd be best That's got to go in that hole But this has got to go in that hole you it's got to go straight up honey. You can't go at an angle like that All right now shit on up in there. Hang on one second now Are you lined up on your things? That corner's not going in Sit this down for a second. Okay. You got to kind of watch hold on to it though. Don't it's okay relax I thought I left them loose enough. I guess I didn't see these are adjustable. See So now it should go up in there and then you go back and tighten them and put little tiny nuts on In the kitchen, I got it. I got it Let's set it back now That's what I just said So what a guy worked with I Say something then he says it like he had the idea In here. Well these need to be moved out, huh? It will go you know what I mean? Yeah, it will go Because it went like this when you went to put it out It went like this a little bit so the plastic piece was rubbing and hitting that one This piece yeah, right there. Yeah So that's why I said you had to kind of So it can go up in there. I mean loosen these up a little bit more and Then I'll retighten them so they can move some Well, that's another thing. He was kind of sideways I Need the wheels don't roll that way then we roll forward and backwards not sideways This again, huh? I left 200 pound axles almost every day and we got one shot it down Let's do this again ready. He does that one two. I'm like I'm standing there. I'm like, you know, let's just do it He's like, okay, I'm gonna count Dude just grab it growl, you know Yeah, I see Okay, I'm just gonna have to trim that. All right, let's take it out. It's no problem I see they didn't cut that off straight All right, I'll just bring the cut off wheel in here and I'll trim that out no problem All right guys, I have to trim That corner back there. So I'm gonna do that and then I'll turn you guys back on so hang tight All right guys, we're back. Sorry. We had to cut you off. We was having problems and I'll tell you why because these Hood ranges or range hoods are supposed to be mounted Up from the ceiling is where they're getting their measurements from Now as you can see we have a drop here because this used to be cabinets and then it had a fan here But it was a cabinet mountain was up inside the cabinets Well this You know, they want you to have the top part of this 30 inches minimum from the top of your range For of course safety reasons and and whatnot. So what I had to do was I had to cut these down And re-drill holes and slot them so that they would fit and so I could get my my Height here while doing that that meant I had to Fabricate the outer pieces that it's called the chimney It's like it's the cover that goes around that right there and this is just one half of it So I had to fabricate that and cut it down. So that way it'll fit up in here Because like I said supposed to go way up there and come down since we couldn't do that I had to do some fabrication. That's why we stopped you now in your case. You'll do just what we was doing Only years will probably line up pretty good and also they gave us the wrong base plate, too This should be as white as this and it's not it's a little bit And I don't know if you can see in there, but this is offset the hose and they don't have the offset base plate To where the hose will go straight up. That's okay. I mean, you know it curves So we're good there But I had to had to do some fabrication on this one Which you shouldn't have to do on yours if you're going straight up to the ceiling If you do have to do something like this get someone to help you because you will have to fabricate that and they will not tell you That so here's you know, the here's the fan Three and four here's the lights are four lights and We also have the controls over here as well on both sides So that is pretty cool. I didn't know it had that so that's pretty neat So I'm gonna get off here. I'm gonna get this put up All I'm doing it's just like, you know two sides. I'll put that one on that side and then the other side on here and I'll screw it in up here at the top and then I'll give you a complete final Oh, I gotta put our screen in here and then I'll I'll show you the final product So there you go. Monkey's very happy Yeah You're a statically happy three years. Yeah, she's very happy Yeah, it is nice and I'll show you if you can see this what I'm gonna do here. This is on to the speed See it's on to Just a little cigarette Let's if you can see this So there you go I'll be back with you and we'll show you the final product and or final thoughts So stick around guys, I'll be right back in just a second. There it is guys. I'm done Like I said, I got some finished work to do up here But we're gonna put some kind of lighting system here, which I know I'm gonna have to do some finish work So I'm just gonna do that all at once So but there it is all done ready to rock Now we got to do is get our little bar That's why we had to get a slider stove Get our bar in here Goes around here And it'll be fine, huh? Yeah, do I get? Oh, yeah. Yeah Yeah, it's quiet. It's only on two, but it's still quiet. So it's pretty cool controls on both sides Yeah, yeah No, I didn't realize that it had that never Right so Well, honey There's all kinds of paw prints here paw prints. It's got fingerprints there Anyway, so there's what we got There's what we got and it worked out pretty good a lot of fabrication to make this one work With that one-foot drop there. So but that's okay. We did it made it work, huh? Yeah All right. Well, we're gonna have a cookout, huh? Yes getting late. So we'll pick something out on the grill A couple drinks sound good. Yeah. All right. There you go, Monk You're welcome. Bye Mike's out she bear I'm gone. Remember the myth man the legend Don't forget to comment rate and subscribe check out monkey 1000. Thanks guys. See you soon