 We just made this welcome to our home sign Without any tools and it's even got a replaceable. Oh, and we'll show you how we did it right now What is up welcome back do you like to do a builder to make it a great That's what we do on this channel every week this week. We're making a no tools No woodworking tools no woodworking tools Welcome home front porch sign with the interchangeable. Oh Swap the O out make it all kinds of things Well, none of your woodworking to none of your woodworking tools Step one We're going on a field trip to the home improvement store To pick up two dog earpins pickets and then a small one by four And we're gonna use there so Go ahead and cut to 11 inch pieces You can use their trim saw they'll let you finally pick up your letters We'll leave a link down below where you can get these letters that will fit this project Yes, just so you know we looked everywhere. We looked at all of the craft stores Michael's Amazon yes online at Amazon and we cannot find the correct size letters They were either too big or too small and these are just right a step to Time to stay in and paint Kim's gonna stay in the boards That barriers smoke and I'm gonna take the letters out and give them some spray paint. I'm just flat white spray paint All right, I'll grab that baby. All right. Let's do it. We're gonna glue our boards together Remember no wood tools of your own the paints all dry But I painted the paint in the garage. I don't know if you can see it And I left it and a kid rode their bike over every letter Every letter had tire marks through it and they were vertically they were in a square Yeah, I have the stack in a square. Well, you just saw it, right? Somebody rode their bike every letter including the little dot in the eye. I mean Then when I asked nobody knew who did it. I had to catch him with the white paint on the tires Now we're gonna glue it up We got our gorilla glue. We're gonna see if this thing really does hold everything We'll see was this girl Five and a half inches from the bottom. Here go. I'll do it man. You already had it exactly five and a half inches That's pretty impressive the thing about this gorilla glue not the wood gorilla glue just Traditional gorilla glue it expands You don't want to put too much. We had that we had that happen Should I put something heavy on it? Yeah pretty painless Brad didn't even get hurt Step four we're gonna glue our letters down. We're just gonna glue the H Me down right now. We'll stage it with the oh, yes, we're gonna need a spacer You need to give that how long did it say? It's like 20 minutes or something. Oh One to two hours just clamp it down for one to two hours. Does that mean put something heavy on top of it? Yeah Two hours later. All right, we're back. Everything's dry Everything's pretty pretty stuck But you know if you can see it The glue puffed up and it puffed out the edges a little bit So we're gonna take a little exacto knife and trim it up. So we got so far. We didn't glue it. Oh one I'm gonna do this with the thumbtack. Damn Wait, do you need to know where it goes? I think that's it No, it's too high too high. Well, that's why we use the thumbtack. Do you like the family in there? Oh wait, you don't want like the family in there Too bad. I got it. I got it. I got it. All right. Now we're coming back No tools All right. We're not done yet We're gonna add a stencil at the top really set it off Set it off number one tip like the number one tip with adding a stencil to wood is Coating it first with my podge so it doesn't bleed wait on our stencil Big shout out to our top patrons Handmade by Vincent Ferrari Shout out Vincent Go on do the bow while we're waiting for that to dry. Sure All right, I've prepared our bows So these are 35 inches and We've made one so that you can swap them out for each season. So there's this All I do is wrap it Put a little tie right here with some jute jute. Yes. What is that? Are we allowed to say that? Did we just get demonetized? And so you can use the Black and the black Chevron or you can use the Buffalo plaid for Christmas. I like the Buffalo plaid. I do but we're not there yet. So we I Mean I do too But we're not there yet. So we're gonna use this Cute little orange one for fall because we are in fall and we're just gonna hit it with some jute We're gonna add some jute to it. See you jute it up real quick You're just gonna hold that thing. Yeah And then we can put a little of this at the bottom and we can leave it And leave that all year round I'm gonna wrap this one a couple of times. Can you see me? Yeah So cute I think we can remove the stencil. I do It's not completely dry But it's dry enough that you can remove the stencil. This project hit that like button leave us a comment I reply to all the comments. I try not to let Garrett reply If you guys want to watch one of our past videos, I'm gonna put them over top of Kimberly for saying