 Γεια σας και παιδιά! Είμαι Βικη και είμαι εδώ με ένα πολύ καλό αδερφό χαρά σήμερα. Θα σας δημιουργήσω ένας από τα χαρά που πρέπει να χρησιμοποιήσεις το χαρό να αδερφιστείς το μονο. Και για αυτό θα χρησιμοποιήσω έναν νέο αδερφό με τα πιο καλύτερα μου, που είναι η Πικαμπού αδερφό. Όπως μπορείτε να δείτε, είναι με το χαρό με το αδερφό που κομμάσει ένα τάμπ, όπως 4 χαρές να κομμάσει από το χαρό για τα μονοδά σας. Αλλά για αυτό θα μου επικαμπο MORE, και να κομμάσω όλα τα πιο καλύτερα μου, και όλα τα πιο καλύτερα μου, και όλα τα πιο και μοναχές μου, και ήθελα να σας δείστω επίσης πhow μεταφέρ όλους μπορείτε να αδερφιστείς βασικούς αδερφό. Και πει ότι μπορείτε να σας φύγει το μεκανικό! Θα χρησιμοποιήσω τα χαρές από το νέο τάμπ, που βάζει ένα σημανιλάκι και τελευταία των στιγμών από το αυτά που θα εξέλουν με τα πιο καλύτερα μου. και θα στυμπω ένα δυο νερόντρο, και ένα λίγο καθαριστό. Θα στυμπω το καθαριστό με το μυαλό και θα σιχθω στιγμό με τα μεταφύλα λόγια μου, και για τα νερόντρο αν μου είχα στιγμό με τη σύγχωμα οράντρα που είναι η λύκη, στυμπωνο στιγμό που βλέπετε μου εναντικό. Και θα επαναθώ σε έναν κολλοδο, κολλοδοο μυαλό, που είναι χαμμυαλόντρο. και θα τα φρατωθώ το μόνο μου. This way I achieve a little bit of shading at the bottom of my trees so they don't look as flat. Now I'm going to use my alcohol markers to colour the owl and then I'm going to use the matching dice to cut out everything. When you are going for a card such as this one with a rotational wheel, then it's always nice to have all the elements for the top of your cards ready to go So that you can place them on top you can see where the little window with where the message is going to be revealed is going to fall so that you know exactly where you need to cut out things. So here as you can see I'm cutting out a couple of slopes. I'm using dice from the hit the slopes dice set which is a dice set that I have been using again and again for winter cards. These are going to go at the bottom so I'm just going to try and decide where everything is going to go and I'm not gluing anything down right now. I'm just trying to decide where this die that is going to cut out a spitz bubble window is going to fall. Now I have used the wheel to cut out this template and this is just printer paper. I'm just going to fold it in half so this way I have four quarters. Hopefully you can see the fold lines there. Now I'm going to place it at the back of my panel making sure that this wheel is going to fit inside the panel and you don't see any edges coming out of it. Then I'm going to place the tie on top and make sure that it's going to cut out on one of the four quarters just inside that quarter. I will use some tape to secure the die in place and then I'm going to run both the white and the blue papers through my big shot at once. And I end up having the blue background with the little window as well as the template with the window in the same position as well. Ok now it's really easy to decide where you want to stamp the messages and make sure that they are going to fit inside that window. So I'm working on my template now and hopefully you can see the lines that I marked with my pencil just so you can see them better. I am placing the template on top of my actual wheel and now with the pencil I'm going to mark where those lines are going to fall. And now I'm going to show you how you can do the stamping. I am going to use one of the sentiments in the same stamp set as the little owl and the trees that says guess who thinks we are special. Now of course you can mask parts of this sentiment to stamp it but I went the easy way. I'm just going to chop off the sentiment in four parts and then I can stamp each and every one of them separately. Now I have placed the template on top of my actual wheel making sure that the marks on the wheel match the lines on my template. Then I'm going to stamp the first sentiment inside the window. Now rotate the wheel 90 degrees, place the template on top again making sure that the lines on the template match perfectly the dots on the wheel and stamp again the second part of the sentiment. And I will repeat the same process turning the wheel 90 degrees placing the template on top, aligning the lines with the dots on the wheel and then stamp again the third part of the sentiment. It's really easy to do if you have the template and of course you can create a template once and keep it with the die so that you can use it the next time. Now I am going to stamp the fourth part of my sentiment which is special. So here is my wheel ready with all the four parts of my sentiment and when you rotate it you can reveal the full message. Now of course to be able to get your hands into the wheel to rotate it you need to cut out a little tub. So for that there is a die that you can place. I would suggest to place it at the back so that you know exactly where you need to cut out. And here comes the part where you need to secure the wheel with the brad. You can either secure it at the top with the brad but this is where you will need to cover it up somehow. So I decided to secure it at the back panel, the white panel that I have here. So I'm just holding everything in place with my fingers. I'm using some tape to make sure that this is not going to move on me. And then with a pick tool I'm just going to create a little hole at the center. And now I can put those two pieces together with a tiny little brad. Making sure that I don't secure the brad very tightly so that I allow for spinning with ease. And here is a close-up on how I attached the brad. You can see how easily I can turn around the wheel. You don't want to make the life of the recipient difficult when it comes to spinning. And this is a tiny little stamp set that has been released by my favorite things. And it is called Interactive Labels. It has little words like spin, shake, flop, look, open, slide, things like that. And little arrows. You can use the one that says rotate or spin. I'm going for the little arrow now. And I'm going to stamp it in four different areas. Exactly where those pencil dots are. And if you love interactive cards I think this tiny little stamp set is a must-have. Because it has all those little words and arrows and little symbols that we need for this type of cards. So now let's put the card together now. I'm just going to add some foam squares at the back of my blue panel there. Making sure that when I stick one on top of the other I don't block the spinning of my wheel. And you can see here a close-up of the wheel in action. As I'm spinning the wheel the message is revealed. Super fun. Now all I have to do is to just place all the elements at the top of my card to create my little winter scene. The snowbanks go at the bottom. The top layer has a foam tape at the back for dimension. While the second layer is going down with tape. And then on top I can add my little owl as well as the trees. And this is where I decided to use that blue tap that I have cut out from the front panel. And I'm going to stick it just at the back. This way the wheel is going to pop more since it's going to be white on blue instead of white on white as it is now. And of course you can do this step before you put your card together. This is going to make your life easier and you won't have to fight with the pieces like I'm doing now. And finally I'm going to stamp some snowflakes. The snowflake I'm using comes from the same stamp set as the rest of the stamps. I'm using a pigment frost white color box ink. And this is going to create some very subtle snowflakes at the background. Which I'm going to finish them off by adding a crystal gem at the center. And here is my finished card using the pick-up wheel and the adorable warm and feathered hugs stamp set from the latest release by my favorite things. I hope you had fun that you got inspired. I certainly had lots of fun creating this card. Don't forget to leave me a comment to like the video. And I'll see you all next time.