 Welcome to the snap. This is a segment where we answer frequently asked questions in a very rapid fire format. So let's get right into it. On this week's episode of the snap, I'm going to be discussing how to replace the high temp O-rings on your tip. Now, why would I need to replace the high temp O-rings? It's really simple. Over time, the O-rings may break or I may lose one of them during a deep clean. There are primarily two methods of taking care of this. Now, the first step is simply remove your tip and your cap and remove your condenser. From this part, I can demonstrate both of those methods. Now, for the primary method of replacing your high temp O-rings is simply just take your high temp O-ring and slide it right over the top. This isn't too difficult if you have relatively good finger dexterity, but if you have arthritis or a larger hands, it can become quite difficult, even more so with these bottom ones. That's where the real trick comes in, using your condenser as an anchor. I just thread a couple O-rings at a time onto the condenser. I do not recommend doing more than two at a time because the likelihood of them bunching up over one another increases. So now, if my finger slips, it's going to stay anchored to my device. And at that point, I just slide down. I pull towards myself and we'll go right into place. It will take a little bit of time and patience to do this, but rest assured, it will go on without issue. Now that we've replaced all the high temp O-rings on our tip, we just simply have to reassemble our device. Just take my condenser and my tip. If I'm going too fast for this part, please reference our video for our omnivac assembly. And if you are getting any of the bunching, please reference our snap video where we actually address this issue. Now that we've reassembled our device, we can get back to vaping. And Matt has been the snap. Thanks for watching and be sure to check out our other videos here and here, and make sure to subscribe and ring the bell to be notified for when we release more great content.