 Fun Shaber 1000 hair and that's monkey tonight we're gonna be making a giant one of these out of one of these stick around let's make a bulb guys so she's here gonna be making a bulb that's gonna light up out this ball here and this ball monkey was reading it earlier I don't like that that's gonna be on there but it's got to be on there I guess it's not a sticker it's made in Ashland Ohio just north of my hometown so it's kind of cool and we're going to use this citronella candle we bought a Walmart we bought that at Walmart and this is the only one we could find at Walmart and you can order these online be a lot cheaper this was 20 bucks right yeah so this is Honeywell it's LED because you want to use an LED because this is rubber this is gonna be lit up okay but this candle we have to get the candle out of here and I'll show you how we're going to do that in easy way and you'll still be able to use your candle okay we'll get this light out of here it's not what I wanted but I can make it work like monkey said can you make it work I'm a shader okay so we're gonna make it out of this okay this is gonna be shining down through the ball like that okay so first got this they're going to use a hot glue gun which should have already been plugged in but I didn't plug it in so I won't plug it in right now so there are a couple glue sticks there I'm gonna show you how to get this candle out of here okay so what I've got here is I've had some water boiling so I got it hot I turned it turned it down and we're just gonna stick this in here for a couple minutes just so it gets gets the tin warm and once the tens warm we can you don't want to actually melt the wax you just want it warm enough to where it'll come out and we'll pour it out onto something paper plate or something and that way we'll still be able to use that candle next summer spring some camping so alright I'll be back with you as soon as that gets ready you'll know because you reach in here and go to turn this the wax will spin inside of it okay guys so say it's it's turning in there so we should be ready to there it is there it is I got a little bit of wax on here but that'll come off thank God it's granted so alright so now we're gonna wash this out it's just gonna take some hot water so it's gonna take and then then we'll get to step two here excuse me step two I seen this on a video today I seen somebody build one similar so that's why I got the idea for him it's not my idea so I seen it on YouTube thought it was cool so alright I'll be right back with you okay so now the next thing is to make a hole big enough for this cord to come through and I'm just gonna use this step bit here it's kind of overkill but it should be alright and I'm gonna use my new drill that Dennis sent me we're going outside to do this because I don't she won't let me do it in here I don't know why give me a look again okay let's go outside monk okay okay so now we got our drill and we're just going to punch a hole in here until it's big enough for this plug in to go through we're just gonna be at I'm gonna kind of off-center it now it doesn't have to be here we go who says you can't put a square peg in our own hole there it is alright now we're going back in the house okay so we can either cover this up or cover this up so she wants to cover this up so that's what we're gonna do we're gonna do that with a light okay like this and then this is gonna go up through the hole and the buckets gonna get glued on here so we're gonna go ahead and glue this on here I got this glue gun I've got it on the low setting so it should be alright shouldn't burn through that rubber ball we'll find out though right yeah if it does it'll be a funny fail video but that guy all he did was use a well he didn't glue the light onto the ball so where do you do now he is was a different a little different design he just put like a couple drops to hold it and then he used some kind of silicone glue clear silicone glue no I don't so I think this is gonna work maybe not this stuff might not work we'll see right moment you know you can use whatever kind of adhesive you've got this is what I've got so this is what we're using because I forgot to get adhesive when we was at Wally World hoping I don't get too many of these strings over that it'll look like it's cracked it'll look more authentic though right yeah okay like she said we're gonna let it dry let it cool down a couple minutes and then we'll be back with you and we're gonna put the top on it because I'm gonna take this we hold it because they're gonna take this veil out of here anyway just like that it took a veil out and this is going to go on top so all right we're gonna let that cool down a minute okay guys so that didn't stick to the ball so we went down we're gonna try some of this we got this at the dollar general and it was $2 so setting time five minutes so this we're gonna try this if this don't work I've got some what you call it contact cement I know it'll work let's try this I'm gonna open this up here there's the applicator this is a mix but it's automatically mixing I've already read the instructions but I've used this stuff before works pretty good but I don't know about rubber so I've never used it on rubber so it says to hold this up pull the plunger back a little bit which it never usually does but then you take this you snap this off don't twist it says don't twist it okay now this just gets put on and you turn it a quarter turn like that and then it should be ready so what I'm gonna do is I'm gonna this ball is my way okay so I'm gonna see it mixes as it comes down through there there's little things inside there that make it twirl and mix together so we're gonna go ahead and put this on here I'm going all the way around with it just like that and then I'm gonna pull the plunger back just a smidgen so it can see it went back in there which it's kind of it's small but it's kind of a one-time thing because once it goes back in there it'll harden and dry and be done so we're gonna put this on here just like that I'm gonna hold it for a minute well it says join surfaces within four minutes of adhesive application immediately remove excess glue with mineral spirits or rubbing alcohol then the bond sets in five to seven minutes and achieves usable strength in 20 minutes I'm gonna hold this for about five to seven minutes and then we'll we'll see if that does any good if not I'll have to get my contacts cement okay so we got Miss Monkey here holding the thing it's been about been about eight minutes so should be good enough to try to put that that thing on so we're on I used a whole tube on that like I said it's not much it's one time use cuz even if you suck it back in there it's already mixed and it'll harden up so that's why they're so small don't you wanna put this through first okay monkey's telling me my job here I hope the ball street well I checked that outside or inside here remember yeah it was fine it was fine why is it not now I don't know all right we'll make it work okay I got an ideal be right back okay so I did was took a pair of pliers and I just kind of ripped this hole a little bit bigger around here so be careful it's sharp I got a little tape on there so I don't cut myself but I'm gonna be putting a bunch of hot glue around here to keep the water out anyway so all right let's glue this so I'm gonna put this glue around here we're gonna let it set up I got a couple more tubes I'm probably gonna use them all and then we'll be back with you okay guys so I think this stuff's gonna work so what I'm gonna do now is I'm just gonna kind of fill this fill this in the best I can with hot glue to keep the water out of it and so it's not so sharp and this this doesn't have to come out again because you can't change bulb anyway and it it's just an LED so I'm just gonna fill this up they're gonna take it outside and hang it up and see what it looks like okay guys we're outside now we'll hang this up so don't fall off the stool monkeys and I'll save you Shae Bear thanks monk I just got a piece of wire up here this thing's not that heavy anyway guys no it's very light this over here now an extension cord here somewhere okay then unplug it there because we'll do a lighting okay just going kind of tie these so they don't so they don't come unplug I'll do it a little better tomorrow because we're gonna be putting up some lights outside tomorrow nothing major like last year but there's that now I'm gonna have monkey turn off the porch light it's gonna be dark just for a second guys you gonna plug her in okay go for it monkeys gonna get it I guess so go for monk and there it is there it is guys we did one but I like another one now well we had two balls yeah we did but the lights were 20 bucks a piece and I just I'm like damn they're expensive and there was only two laughs so yeah yeah everybody's used them for outside and Christmas and stuff so you'd have to get another ball another candle and another leg yeah and four more tubes of that epoxy I think I'd like to go blue blue or red well they didn't have red so we have to go with a blue ball yeah all they had was pink but there it is guys that's cute though yeah yeah I liked it so you want one down at the other corner huh yeah hang on we'll be back with you we're gonna step back look at it okay guys so there's our homemade Christmas bulb like I said it's not my idea I've seen a guy doing on YouTube yeah cuz you know it's starting to pop up these people DIYs with Christmas decoration ideas and I showed that to her and she was like you can make me one of them and you did so I did just use whatever glue works for you I mean rocket science it's just it's a light and a ball and a little pale we couldn't find any pills that people use for crafts and stuff for some reason so that's why we had to get to get the candle but again we're gonna use that candle so yeah well I mean we needed another one anyway so I wound up just putting it in a bowl or something it'll be fine so because it was like eight bucks yeah yeah which originally it was $15 must be half off or something like 77 yeah yeah eight bucks so yeah so you can find them cheaper you can find any of that stuff online a lot cheaper I'm sure oh yeah I mean the ball was pretty expensive yeah for a rubber ball for a kid to kick around but so there you go like I said not my idea somebody I've seen on YouTube doing it so and he's got links I can't I can't remember what channel was or anything never heard of them not not not stutter not very many views kind of like I get but yeah it was a great idea so you know he did good on it and he had a better light to where that bottom piece that come clear all oh yeah so he had a better better spotlight but that that turned out it worked fine because it's up high enough you don't see that top mm-hmm the top top but so anyway there you go guys again not my idea but a good idea so whoever came up with it that's pretty neat mm-hmm so give it a shot I like it yeah look nice with the rest of the stuff when we go outside yep tomorrow yep yep all right we'll see you guys in the next one yep tomorrow I'll they'll see this tomorrow oh are they today's Thursday yes you'll see this on Friday okay all right monkey says she's out for now y'all have a great evening and see you in the next one very good she better met the mantel say bear the met the man the legend I'm gone for now half drunk here must be the glue yeah when he gets more that stuff see you next one bye guys