 Γεια σας! Είμαι Βικηγιέρα και σήμερα θα σας δημιουργήσουμε τη Σεπτέμπερα Κάρτγητα από Σάμμουσα Σταμπ. Πριν θα πω με τα Κάρτγητα, πρώτας να παίρνουμε μια μικρή λογή για να παίρνουμε την Κάρτγητα. Φυσικά, μπορείτε να βρεις το Λόλι-Πόπ και τότε υπάρχει αυτό το στένσυο, το πλαστικό νεύμα και το γέσο, που είναι πολύ σημαντικό για πολλές τεκνικές και θα σας δημιουργήσουμε κάποτε από αυτήν την σήμερα. Υπάρχει also this bag full of acetate cards, these are mainly used for project life, where you put them as filler cards and side those pockets, but I am going to show you how amazing those are for creating shaker cards. As always, the kit includes a number of 6x6 pattern papers and this month they are really colorful and playful and as you can see they are double-sided. I am quickly browsing through them so you can take a look and as always there is a clear stamp set, this is birthday themed with balloons, little hearts and bits and pieces and finally there is cardstock in different colors that match perfectly your pattern paper. So today I am going to create three different cards so I can give you ideas and inspiration on how you can use the kit. First of all I am going to use this pattern paper which was in the kit and I am going to cut out a rectangle. Now you can always use your paper trimmer to cut it out but I decided to use this stitched die because it gives a nice finish since it has a nice stitching all around this panel. Since today I am going to create three different cards I am going for quick and easy cards. So first of all I will be using the bigger balloon with the outline and I am going to use black ink and I am looking for a pattern paper that I can use for my balloon. So I decided to go with this pattern paper and I am going to stamp the balloon over the area that says love and it has that cute little heart. I am going to use my scissors to cut out the balloon and I am going to repeat the process with a smaller balloon on another area. And while I am doing that just to let you know that there is a giveaway on my blog so if you want a chance to win this September card kit by Simon Says Stamp make sure to visit my blog, read there all the instructions to enter your details on the giveaway. If you are watching on YouTube then you can find a link directly to that post just below in the details area. After cutting out both my balloons I am going to stamp the sentiment and in the stamp set there is a sentiment that says let's celebrate so I have decided to go with that which I am going to white emboss on the very top of my panel. Now the top of the panel is quite darker than the bottom so I can use white embossing powder. I am stamping with my VersaMark ink which is just a sticky ink and I am applying my white embossing powder which I am now going to hit set with my heat gun. Now that I have the sentiment in place I can decide where the balloons are going to go and I am going to make a tiny little mark with my pencil so I know where I can stamp my strings. In the stamp set there is a big line that you can use as a string for the balloons and I am going to stamp twice to create the strings. There is also a nice little bow which I am going to stamp as well on top of those strings. Now I am using a foam tape at the back to add a little bit of dimension on the balloons and I am placing them close to each other overlapping one another. This is going to create an interesting layout. Now I am going to stamp the bow. I am going to stamp it on both of those strings. Now all that is left to do is to stick that on top of a standard card but just to make it more interesting I decided to use the Gesso and the stencil that was included in the kit. This is going to create an interesting background for my card so all I do is just using the spatula with the Gesso and going all over the stencil. I mainly focus on the edges since you won't be able to see the center of the card base. Of course you can do this technique with embossing paste or modeling paste but if you don't happen to have those two products then you can always use Gesso to do that. Especially this type of Gesso works great with stenciling because it's quite thick. While other types of Gesso that are quite liquid like the Faber-Castell one for example it wouldn't work since it's very liquid and it will go under the stencil. So you can see what a nice white on white embossed effect I have. I can now stick the panel at the center of my card base. I am going with foam tape at the back just to add a little bit of dimension. And that finishes my first card. You can see close up photos of this card at the end of the video. So now let's move on to card number 2. The kit comes with those beautiful acetate cards that are 4x3 and I just cannot resist using some of them to create some shaker cards. So I am going to show you two easy ways to use them. First of all I am going with this blue one and I decided to create a frame out of this patterned paper from the kit. So I am using two of those stitched dies one inside the other which are going to cut out a frame with my die cutting machine. Those dies are by Simon's stamp and they are the stitched rectangle dies. So I have cut out the frame now and you can see how nice and colorful it is. And again in case you don't have those rectangle dies you can always use your craft knife or your paper trimmer to create your frame. So I am adding some tape adhesive at the back of my frame and I am going to stick the acetate. Now always make sure that you keep attention to the front and the back of your acetate so that you have the walls facing the correct way. I am using my foam tape at the back and I am going to create a wall all around the edge so I can add my confetti inside. For my confetti I am using this by Martha Stewart which was included in a previous kit by Simon's stamp. I love this confetti because the colors are really wonderful and sparkling and they have little stars, little hearts, it's really beautiful. You can see some close up photos of what's inside that window at the end of the video. So now I am peeling off my tape adhesive and I am going to stick a white paper for the background. For my card base I am going to create a standard card that's 4.25x5.5 I have picked up one of the cardstocks from the kit cut it out at 4.25 and now I am going to use my Martha Stewart scoring board to score it at 5.5 So I have a standard top folding card and this is where I can stick my frame Now just to make it more interesting I can use Jesho again and I am going to show you another technique I am just going to thin it with water and then with a small brush I am going to add some splashes on my card base I don't need too many but these are going to create an interesting background Also don't forget to add some splashes on the inside of the card for a nice matching look So once this is dry I can use my tape runner at the back of my window and stick it at the center of my card and this finishes the second card for today and you can find close-up photos of this card at the end of the video So let's move on to the third card For my third card I am going to use this beautiful acetate and create another shaker card This time I have created the frame out of white cardstock just like I did with those dies for the second card and I am going to stick it at the back So I have my window ready and I can go ahead and do the frame all around with foam tape and I have picked up one of those pattern papers from the kit and I have cut it down to 4.25x5.5 So this is going to cover up the whole front of a card base The card base that I have created is out of the white cardstock that was in the kit and now I need to find backing for my window I have decided to go with this cardstock from the kit because as you can see behind that window it perfectly matches the colors of the pattern paper So I am going to use a die to cut it out I am adding some sequins these are silver but they will not show a silver at the end Just because the acetate window is colored both my backing paper as well as the silver sequins will not show up with their true color but this is exactly what I was going for since now it perfectly matches my background paper So I am going to add some tape adhesive at the back of my window and then stick it to the center of my card So all that is left to do now is to add my sentiment and I am going to be using this Hello Die which is from an older Simon Says Stamp card kit I have used white cardstock to cut it out and I am going to poke out all those little areas and then I can use my glue to stick it on the window and this finishes the third card for today and here are all three cards together and I hope I gave you some ideas on how you can use the supplies included in the kit Don't forget to visit my blog and enter the giveaway for a chance to win this September card hit by Simon Says Stamp Here are some close up photos of all the cards that I made today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel Also make sure to hit the subscribe button on my youtube channel because this is the way to tell me that you love my videos and you want to see more For more inspiration you can click any of the videos on screen right now or if you are watching from a mobile device then you can find links to those videos just below in the details area or you can click the info card that just popped on your screen Thank you all for watching