 What's going on everybody Chad here and today I'm going to be treating some rust so I have to pull on my hitch and it is not looking too great but that means I'm going to be sanding I'm going to be painting I'm going to need to not be breathing in those particulates so today we're going to try out the airgear pro g750 respirator so let's put it together and test it out all right so we have everything out and we're going to go ahead and get this put together so we start by taking our particulate filter and putting it in this little tray here that's going to go on here now key here is we want to make sure that we have that text facing out I'm just going to go ahead and snap that on and boom we are good to go with that one we'll do the same thing with the second one so then we want to go ahead and get it on the mask so we have three little notches here and those three little prongs right there so we are just going to go ahead and get those on super strictly just like that all right there we go now that we have this together let's go ahead and test it out all right so here we are so as you can see we have the rust all ground down we're ready to coat again with some product that treat that rust but on goes the mask for safety and there you go as you can see super easy to put together unbelievably easy to use and one of the key features on this that I definitely appreciate is all the adjustments along the back and that's going to fit your face really well you don't want a loose fitting mask that's going to allow those particulates to get in so points there I'm getting all the correct points on here so it can get a good fit so protecting me from all those particulates when I was grinding off that rust when I was painting uh protect the eyes during both those processes as well this did exactly what I wanted and was a great fit so I would highly recommend for any of those products that you're doing that you will be kicking up those particulates and while I am compensated for my reviews I would definitely highly recommend