 All right, ladies and gentlemen, this is Drew with GeoAlarm Security here to show you how to program the GeoCT wireless door window contact into the GeoAlarm system. This is a very, very easy process to do. It actually kind of walks you through right on our GeoAlarm panel here exactly how to enroll this device. So what we're going to do is we're going to go ahead and hit the little menu button over here. In the top left-hand corner, we're going to enter the master passcode, which factory is one, two, three, four. At that point, we're going to go ahead and go into devices. And then you're going to see a plus sign up in the top right-hand corner. You go ahead and hit that. It'll tell you what you need to do. So we're going to go ahead and select door because we're going to be enrolling a door window contact. You could also a chose window but I'm going to do door here and it walks you through a little video here exactly what you need to do in order to get this device enrolled. Now typically this thing will have a little plastic tag in it that you can kind of pop and then from there you'll be able to enroll it. I've already popped the one that I have so we're going to have to do it the way that they're describing here by removing the magnet from next to the sensor. So we'll go ahead and we'll do that. It's that simple to get it enrolled there. Now this is where you're going to name your device. You're going to name it where you want it to be. I'll go with something different than we normally go with so we'll go with let's say basement entry, right? And as you can see she's walking you through a video right now and she wants you to go ahead and install the sensor now at the location that it needs to be installed. I'm not obviously not going to do that I'm just going to hit done here and it adds it for you. Alright so it's really that simple to get a device enrolled and then once it's enrolled it'll show up here on the screen. So we have door one here which is basement door. We're going to go ahead and click on that. Here you can edit all of the features of the actual device. You can do a custom name for it. You can rename where it's actually located. You can change the delay on the sensor. This is inherently an entry exit delay. That can be changed to an instant if you choose. If you want the sensor to immediately go off without a delay on it. That's good for things like windows or doors that you know aren't coming in and out of when the system is armed. So we're going to keep it on entry exit delay and 30 seconds is pretty much typical and it can obviously be edited to different you know forms of or lengths of time here. It can also be set as a 24 hour alarm which means that that device is going to be monitored 24 hours of the day regardless of the armed or disarmed state of the system. So that's how you change the actual performance of the device. You can turn on or off the voice for the spoken words from the sensor being triggered to chime. You can turn that off. It gives you the signal strength which it says is excellent obviously because it's right next to it. It'll give you an about and then obviously you can delete the sensor from here which I'll go ahead and do now. Yes I want to delete it and then it goes back to nothing. All I have left is my doorbell which I'll go ahead and delete as well. But yeah this is a pretty standard and pretty easy on the brand new Geo Alarm on programming this Geo CT wireless door window contact and if you guys have any questions or you need anything at all concerning the enrollment of the Geo CT or the Geo Alarm or any of the other sensors that are going to be you know following this video please just let us know. Once again ladies and gentlemen this is the Geo Alarm and enrolling the Geo CT wireless door window contact. Take care. Don't forget to visit www.geoarm.com that's www.geoarm.com for new parts low cost month to month monitoring, product manuals and support, alarm certificates and update forms and many others. Geo Arm, the worldwide leader in DIY security.