 Hey guys, welcome back to Tech Talk. My name is Chase and today we're going to be going over some of the overlay data features of your Sonar. So the first thing you're going to want to do is go to your Sonar page. So we have Select Home, Sonar, and we're going to go into the traditional. Once you're here, you'll notice some of the data in the upper left-hand corner of the screen. You've got water temperature, speed, battery voltage, and time of day. These are some nice features to have. We're going to show you how to access them or change them if you would like. We'll go down to the bottom right-hand corner, select options, and go down to Sonar setup, appearance, and we'll scroll all the way to the bottom to overlay data. And this will give you access to everything that's displayed there. We'll notice too that speed we've got set at auto. If you're having a discrepancy from speed from screen to screen, you can change it. So for instance, this one might be picking up from water speed. So water speed is going to be the water traveling against the hull of the boat. So for instance, if you're sitting still and the current's moving two miles an hour, that'll show two miles an hour, whereas your GPS will show zero. So if you have any speed discrepancy between the screen, this is where you need to go to change that. You can simply select GPS, and it should mirror back on both sides. And from there, you can choose whether you'd like to show or hide any of these features. I traditionally like to have all of them on, but it is if you do like less clutter on your screen, you can simply slide it to hide and turn them off. Alright guys, thanks for watching that quick video and some of the sonar features and the overlay data that you can display on the screen. If you have any questions or comments, leave them below. Like and subscribe, and if you have anything that you guys would like to see from us, please email us in the address below, and we'll see you next time.