Loading...

Hague Camslide

1,471 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Sep 24, 2010

Available now at www.cameragrip.co.uk - Shipping Worldwide

The Camslide is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table or the floor for low shots. The carriage is supplied with a Ball Levelling Head to mount the camera on, or if preferred you can use your own head from your tripod. Both 1/4" and 3/8" threaded heads can be attached to the carriage, or you can mount the camera directly onto the carriage.

Once the camera is mounted onto the carriage you can create supper smooth tracking shots as you slide the carriage down the track.

The track is 1metre long and can be supported in various ways, there are 3/8" threaded mounting holes in each end, and one in the centre of the track to mount it directly to a tripod or across two tripods. Two 1/4" to 3/8" stepping bushes are supplied should the tripod have a 1/4" stud.
Two track supports are also supplied for each end of the track, these support the Cam-Slide when it is used on a table or the floor and also prevent the carriage from coming off the end of the track.
Suitable for all camcorders and cameras up to 2.5kg.

The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.

Track:- Length 1000mm. Width 50mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 72mm. Total Weight:- 1.5kg.

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...