 Trying to figure out my Mike's life. So today we're going to get our glow on make a Wonder Woman rope. Was it a rope or a whip? Oh, hers is a rope. Oh, yeah, Catwoman had the whip. You know, we can't use this because it doesn't bend around this way. I think it's going to work, B. If we were if we were standing it up, it would totally work. But we didn't we didn't make this groove deep enough. It's OK. Let's just roll with this. Such a great color. So, everyone, we are still getting pieces ready for our upcoming show. We got these bad boys in so that Jeff can inlay some glow. Morning. Hi, Hawaii, everyone. Bowie's really pumped. See. Finishing this. Jeff is painting dimensional cars now that look crazy awesome. I can't tell you all of what he has planned it with those. I'm going to show you what I'm working on that. This. This. This three more. And this is the marble piece that we did the other day with the blue, purple interference to it. That's not trying to show it. There it is. And that's going to be a background for a lip piece. I made it matte today. But this video is in. Our feed of videos. It looks good, right? Makes sense as a marble. Susan, I hope you had an amazing vacation. What's up, Jacqueline, Donna, TG, Tim, Joseph. Melissa, that. All right, so glad all of you guys came. Oh, what's up, y'all? And Miss Krause as well. What's up, Van? You're supposed to be sleeping. All right, B. Tell us how to make our oceans glow. I, I took this and routed this out on the routing table. I guess I've routed it deep enough if the, if the neon rope would be standing up. But it's not, it's not deep enough. So we're going to have to use these to just put down. These are nice, but there's no, you see this, this makes the awesome glow. This is basically what's in here. This is basically the LED light strip. And then they put this. That's what they make the faux neon signs out of. And it just kind of glows and it just kind of brightens everything into one solid neon rope. So today we are just going to make this our neon rope. So what I want to figure out, what do you think? Should I just, should I just put this inside of here? So that this just hangs out and then they can plug it in and whatnot. Just start this stuff here and turn the corner this way and go all the way around. Or are we just going to, oh, you know what? I didn't even think about that. Didn't we want to do just this side? Just where that was. All right. So I guess we could, we can just drag it over there, start it there and go here. Oh, that's going to look good. So now what we have to figure out, let's see here. I'm going to mark it. Mark it. So here's where the blue starts. Here's where it shall end. So what we'll do, we'll just bring this inside. Since they have a, or what do you call it? What is this? Remote. They don't have to have this out. They can on and off all day with this. And this way this bulky stuff isn't hanging down. I don't, I don't like that. Like what I'll probably do, and I don't think it does. But what I'll probably do is just probably just make it to the, yeah, to the, like the far, like, yeah, something like that. So you can't see it. Can't even see that there. So that'll be good. Do this and then whatever's in the middle. I mean, sorry y'all, I'm like, not prepared. Little bench. So I'm seeing, yeah, it's right there. Well, all right. I'm making a line, a little mark to where I can put this little guy and make it so it's right in the middle. Or do you think it like would look nice if it just came out of the side? I think the middle's fine. Middle would be fine. Yeah. All right, and this will go here. You can just bloop, bloop, bloop all the way down. Sticky on the back? It does, but this is such a textured, it's raw MDF. And I could probably paint it, but we're not going to worry about that right now. So I'm going to use Gorilla Glue so it sticks and it'll stay. Not sponsored, but if you're watching, what's up? All right, so this is going to have to go this way. That's the whole point. I guess it'll be all right. I think that's thin enough that it'll be fine to roll out. I think it actually is. Like that's like perfect. Which is another great reason to use this instead of that other wire. Yeah, and you can put a light right there so it starts. The light starts there, so yeah. All right, so I'm going to use this still, but I'm going to put some. You just peel that, and they're sticky on there. We're going to do, we need to put this in place. Is Gorilla Glue your preferred adhesive? Yeah, so far it is. I tried to use Super Glue, and they don't put a lot in their bottles. And this, if you don't put a lot on there, it's 10 seconds. 10 seconds is even too long for you to have to wait. Yeah, I know. Remember back in the days, like you would instant panic when you would like to, like your fingers are too something. I live here now. This is where I am. I'm going to lose skin, lose a finger, or I'm just not going to move. Bowie, is this your dad? Jenny, can't wait to see what they look like. Also, I hope your everything million pieces you just made turned out well. OK, so what's the process? So now I'm just going to, I'm going to put this part in the middle so that I can get the thinnest part here. Every time you tap that, Bowie's like someone's hearing knowledge. Oh boy. Yeah, that's going to be fun, because it's going to go through that. I can, like you can instant, like you could feel it. It's like a little finger cap. I don't like that at all. Doesn't that going to damage the lights at all, right? It shouldn't. I mean, I wouldn't think it would, right? So are you going to put the glue all the way down or just in bits? I'm just going to do kind of bits, like I'm just going to kind of run it, because you don't need a lot. Like if you put a lot, that's when it starts to like take a minute for it to set up, try to get it as close as possible. Well, there's like a little plastic in between, so I thought that was like going through. So yeah. We're only going to right. Oh yeah, right there. Thank you guys so much for watching and seeing what we're up to. We are putting the lights behind just the ocean part, not the sand part. If you haven't subscribed yet, please do so. We are prepping for our first, actually. So we are to say that. Our first solo art show together. Jeff said there's plenty of solo shows. I've had quite a few. And if there's any art sponsors out there that would like to have their logo on our show shirt, let us know. We would love to have you as a sponsor. We need to set up sponsorship tiers. Definitely put a stone coat on there. Do these lights change colors? They do. And this stuff is really sticky. So if you're doing this on a smooth surface, if you put these on the back of your TV or a picture or a normal board like this, it will stick. And it's not going anywhere. So I would just clean the surface first and then put it down. I just want to make sure this is not going anywhere. So because this has been routed and I'm not. All right, so this is where it gets kind of tricky. Ooh, there is one right there though. So that's good. One what? A light. So the white squares are light? Yeah. Yes, and we are having a fall sale on the channel on October 14th with a few vamps pieces, some of our pieces that aren't going to go to the show and probably a couple of tutor pieces. Love the way that charcoal piece came out, Jeff. Hope you're happy with it as well. Thank you. I don't know if they can hear me. How do you decide where you're going to cut it? Where it ends. OK. And then you can cut it on these little splices right here. That's where it's ideal to cut it. On those copper? Yeah. I'm going to make this go over because I want there to be a light right here. So I want there to be. You're going to cut it at that copper or like in? Look at that. You can just kind of fold that over. I probably should test this folding this over like this. I've never set these up like this. So I don't know if folding them are going to work. So we're going to see. We're in this together. All right. So now we're going to cut right here. Snip, snip, snip, snip. Right in the middle. So that way, if you wanted to add something, you leave those little parts and you can solder them or get the little clips or whatever. I'm not a fan of the clips, but if you don't want to solder, the clips will work. All right. Let's do this. Let's put it. And everybody's like, let the switch. My baby guard dog. I'm just gluing this cord down. And the good thing with this, with this being MDF, if you want to take this off, you can pull it off, but it'll take some of this MDF off. But you're not going to damage anything. I had to do that with that rope. And it was fine. And so it looks like he's just going to torture you guys a little bit longer and glue everything down before testing and seeing what it looks like. Well, I don't want to. It's crazy because I feel like I'm the impatient one when we all know. What are you trying to say? That you're the impatientest person ever. You guys would know. We are hiding that so you can't see that little sensor for this. And now we'll have this come out as much as we can. I kind of want to try to make this at least decent, right? Like. See, it's in the back. Just give them as much cord as you can. That's what I'm doing. If you know, you know, it's true, TG. 10-second gorilla glue, the glue of the impatient. That definite. Look at that. Like, that's pretty amazing. Just don't push down. Yeah, we're not responsible if this glues your finger to your board, OK? Use the common sense. Gorilla glue at your own risk. So I have to go to the restroom. You can hold it. All right, when you get these, if you get these LED strips or even the other ones, the the rope, the neon rope, you can't really see it. But there is a little piece of plastic right here. And what that does is it saves the battery. There's already a battery in here. We have to just pull that out. Can we put it back in? You can put it back in. If you want to, like... Just for when we take it out to our home. Yeah. Boop. Boop. All right. Mommy, mommy, mommy. Mommy, I'm not good. Like, oh my God, I cut the wrong way. No, not there. Oh my God, we did put it. We did put it on the wrong way. Yeah. You guys are looking. I was like, why is it blue on that side? We put it on the wrong side. Because I turned it over. Then we're cutting the sand glow. Yeah, here's your sand glowing. You ready? It's on. Is it? Oh, it is on. Yeah, it's on. Let's see here. Blue. This is working this one over, these two over here too. This, oh, it's on over here. Yeah, that's the inside. Yeah, I'm not a fan of that. Unless you're like, see, when it's close, that's what I'm not a fan of. Hey, y'all. So, okay, now what are we gonna do? We can rip it off. It's time, Kelly. I don't know. I don't like that you can see the individual light. Like if you lift it up, you can't see him, you know? That's so funny, y'all. I know somebody saw that and they were like, he's gonna put that on backwards. But I just showed you how to put them on. I didn't say it was gonna be the right way, okay? Note to self. So, Vam says, is he putting the lights behind the ocean or the sand? I was like, the ocean. And then she said, told you, that's why I asked. I was like, that is not told you, that is asking a question. Vam, you didn't say you're putting it on the wrong side. And you can even see the ocean over here. Well, that's what I was looking at when you were like, so now, and I'm like, wait a minute, why is there only blue? All right, let's see. Nah. Oh my God, I don't think that's gonna work, y'all. Okay, just leave it. Just leave it, and I think what we should do is, or maybe pull it up to here, splice it back together and just make it all the way around. She said, I figured you would double check. Why would you assume that? But I don't think the gorilla's gonna let it go. Let it go, see? Oh yeah, it just takes off a little bit. That's what I said. Yeah, I'm confirming what you guys said. What had been said was, yeah, we just gotta make it go this way. Well, now we have to splice. You could create another frame around light. Yeah. Well, what we could do, what we could have done is just left this white. That's what I said. And then put the blue on that side. How would you splice that though? Would you just add it to the tip of this one? No, but then you couldn't, because then it would not be blue and white, right? You could put, no, you couldn't, you know. Because it would be controlled by the same one. Right, that's true. Okay, so is it long enough? Can I help me? I only have one hand. So I don't understand how I, oh, because it goes over this. I see. So I need to go this way. But I don't think it will be, because that only went this far. This has to go down and travel up and around. Splice near the box and re-measure. Well, then he's gonna have to solder and that's gonna be a long, fair video. Well, we have another one. But now, see? Can we just plug, wait a minute. I'm gonna take this off. Can we just plug that in here? No. So. We'll put this one on a smaller one and let's put a new one of these on here. I really want, I really want to use that, the rope. I'm just torn. So if you want to use the rope, we can just post this video as that's how you apply this time. On the wrong side. Well, I mean, the application is the same. This is the thing. We could. Hey, Desmond. We could just do this. And I mean, when it's hanging, God, that's not gonna, I'll have to route that. Oh no, I won't. I can just cut it there. So what's gonna happen is this is just gonna be a little bit higher and then we can just put the cord down there. Yeah. Carrie, essentially you didn't miss anything because we just started over. All right, let's go with it. Now we're gonna show you how to use this. Wait till, I'm not even gonna plug this in, y'all. Wait till y'all see this. I'm sure if you ran here earlier, you would've seen it, but. So what I'm gonna do is I'm gonna, I'm just gonna start this right here. Just like I like the glow of this better. Everybody is gonna like the glow of this better. This is the real deal right here. Those lights are like basically child lights, lights. But you definitely wanna hold this. Yes, yes. We're going up inside. And that's what I got a couple of these so that if you have some of these, I would definitely use these, y'all. Because what this does is it'll hold your. I don't have enough wine to hear all y'all tell me to put it on the right side. Hi, Emma. We see the side. It's jokes because we messed up last time. It's harder to bend this one around. It is. These lights are stiffer, so it's harder to turn a corner. No worries, you guys didn't miss a thing in the first 30 minutes, except for that we did it wrong. Do you mean hold something? No, this is probably already done anyways. Those little things are lifesavers. Susan said, I'm just glad that I'm not alone in a mistake struggle. Listen, we are absolutely human and we make mistakes all of the time, Ash. Ash. I guess I didn't put any glue right there. So you're gonna put the other cord over this. I didn't put any right here, so. We're gonna try to put it under. It's gonna have to, let me think here. What is that color? White. Let's just put that underneath there right now. I think that's, mm-mm, mm-mm. What? Put it coming in, right? What would I do without you, babe? Probably do not resin. Would not be doing resin, that's for sure. So if people are watching this that do this, this is not how to do it, this is just how we do it. This is how we do it. Dun, dun, dun, dun, dun, dun, dun. Your other, um, are right there. The light's back on. No, I don't, I can't see anything. Better than crazy glue. I, I would say yes. Because I think that glue foams, I love it. So this glue doesn't, I don't know if it foams, I don't think it foams. I think it's just on. No. Foams, I don't know about that. Y'all, this is gonna be so much better. I keep seeing these spots and I keep thinking it's glue. I'm getting this dirty. We can come off with alcohol, I'm sure. Can you cut the rope lights just like the other? You can cut these, like, I've never cut these, like, um, randomly, but you can cut these randomly, like, at an angle, you know, but you have to, if you're making a sign, you have to cut it just right so that it looks like it's continuing onto the other letter. But you really wanna have enough to where when you put it in, when you're putting it next to it, you're splicing it and you're soldering it, you want a light and a light. You don't want a light and then a gap and then a light, you know, so. Terry says this is such an awesome and cool addition to your already amazing work. We are really stepping outside the creative box. Like, I'm doing stuff that I've thought about doing, but just never had either the time or the drive or, just, it's just stuff that you don't have the tools. And now that I have the tools and I know how to kind of use them, like a router and a sander and a, almost, just a little bit. Is that the bottom? Oh, you're that, you're that. Judy, I just saw your text, Judy, I was gonna respond as soon as the live was over. Load the lights, I keep sending out two videos to my husband that he doesn't watch. I'm trying to subconsciously prepare him for when I want some of these done. I mean, that's the way to do it, just trickle the information in. And with these lights, you can see, God, look at that, that is like perfect to where it's cut, because there is a line, but that's where they, that's where you connect them. So if I were to cut that, then you can solder something and then add another color. So essentially we could put white on the bottom up and it would just be, I mean, you could, but also where it works now. You actually could. Do I need to hold something? No, I think I waited too long. I'll jib-jibber him. Mm-hmm. Do we need to cut it before you? Put on it? So you, you're, it's best to cut on the light, on the line. Well, you can if you're gonna splice them. Oh, and then plus, the light's gonna come out the end of that. So what you really wanna do is take one of these little guys. They're little, they're little end caps and you put them on. I saw one of those on the floor. So that, yeah, so that it doesn't just blow out a light right there. Let's, yeah, if that's not all the way glued down, you could just wait and, or go ahead. All of that that you cut off, can you use that for another one? You can. You just have to know how to solder. Or you can use these little things. They're little, Creations? Oh, these are for the four one. Oh no, they're not. So these are, that's what these are for. That just like- Yeah, you have to, you have to splice it. Put that end in there and then put your other wires or another line of this, just this in there and then that connects them. Yeah, extensions. They're little, little difficult, but it'll be all right. Touch-uping? There was no glue right here. I think we just waited too long again. Need your face. If I can't get this gorilla glue to work, I will resonance on there. Yeah. We'll wait till our table. We're gonna do a table. Look at Bowie. Bowie, I need you to just relax. Good job. Good job. Crushed it. All right, let's get this garbage out of here. Garbage. I wave with you. That's garbage? I wave with you. Wait till you see the tables that we have. I'm gonna turn over here so you can. Let me just turn this over so. I can't turn off this side. It's on the wrong side again. I quit. Have you out? I'm here. I mean, you'll be able to definitely see the difference between those lights and these lights. Y'all, that is pretty amazing. Is it not showing up? I don't... It looks like a old retro piece of artwork. Like, you know how they have stuff lit up. I almost broke a sweat doing that. Putting these lights on. And then there's just a little bit of like residual glow, which I don't think you'll really be able to see on a wall, but if you do, that's still. Oh, you might, because remember this sticks. Oh yeah, because it's facing down. Yeah, it wouldn't even, it doesn't matter. But I like this. This is like extra awesome. Let's see if we can move this. Let's move it to the floor. That way it'll be a little more even. Oh my God, that looks so good. It's like the luminescent waves. You know? Yeah, there, now you can see the... Woo! I'd like, I want to repaint that gold. Just very carefully. That looks so good. So what do you guys think? I'm pretty sure we have those linked in our Amazon. If you guys are interested in the multiple types of lights that we just showed you. But B, what do you think if we did, like just thin, routered out, like just lines? Maybe do some clear, and then put lights behind that. Yeah, we could put lights like right here. It wouldn't be, it would just be a hard, it would just be like, it'd be like a line, it would stop. Can you like a feathered line? I mean, if you could do a dovetail cut, why couldn't you just come in from an angle to cut like little... Maybe if you had a CNC that went sideways. I have no idea. I'll ask for it. Or if it was a pointy. JJ says, I think y'all are gonna come home sold out of all your art from your show. That's what I think. Thank you Pam, Tiffany, JJ, thank all of you guys. Without it. All thoughts be. Don't do as I do, do as I say and pay attention to what you're doing. Pay attention. Pay attention. This is just sprite. Love the ocean lips from the other day. Well, this isn't chick talking. This is sprite. You tube just in here. Love the ocean lips you did the other day. I do too, and we're actually gonna be doing this one with an ocean halfway up. Maybe we'll do that one tomorrow. Tudor! Tudu! He's not in here, buddy. I hope you guys try something like this. If you have any questions, feel free to do it. Oh, this one. Tudas. Nice bling wash. I think Tudor gave me his as that part. And listen, y'all, listen. So if you guys, if this is just too bright cause this is just like it, like it, like this is just a. On off. On off. They have, they have these things. So what you can do, plug it in. It's an adapter that, watch. Whoa. So dimmy. But look, this is, this is a hundred percent. Gosh, this is 10% 20, 40, 60, 80. You can do fade. You can do strobe. Warning, warning, warning. Seizure warning. Yeah. And you can dim it yourself. You can bright it yourself. You can dim it. Dim, dim it. There you have it. Final thoughts. You like these better than the other ones? I like these 100% better than the other ones. Which ones are more expensive? They're about the same. This comes in 16 foot. This comes in like, what is this? What does it say on there? Stamp? It is not at 7 p.m. It is that open the doors at five. I just got word while we were live. What? Doors are at five. Ah. Okay. And show goes till nine unless they're busy then they'll stay up until 10. All right, you guys. We gotta go work on a zillion other things, but if you haven't checked your email yet, we finally got Stone Co. Arco back into that. Woo, woo, woo, woo. You all ain't ready for this at all. This is just a piece of a painting. Just a piece. You'll stop peace, ain't boy? Eh? Me? And dad? I, I, I, I, I. All right, you guys. We will be back live, Mianna. Mianna. Ocean lip. But we will see you guys right here tomorrow at 6 p.m. central. See. Which is 44 minutes back from right now. Tomorrow. But tomorrow. Anyway, set your alarm because YouTube does not always like to alert people even if your notifications are on. Please subscribe, leave us your films. Go check out our TikTok channel. Also be kind to one another because you never know something's going through. And also go check out our TikTok channel, Artists Till Death. And always remember that we do the tests. So you don't have to. Ew, okay. Okay. That's enough. You guys are amazing. I said bye.