 Hello and welcome to this presentation. My name is Badardine and in this video we will learn how to cache the bitmaps stored in SDcard. In the first part we saw how to set up the SDMMC peripheral and add FatFS file system to the STM32F746.jfx template. In the second part we saw how to cache the bitmaps stored in the SDcard into the SDR. In this part we'll see how to load the binaries and run the demo. Now if I have a look at the map file and the debug and the STM32F746 disco.map if I look at the map file I see that both image background and image 00 are placed under external flash section which starts from address A00000000 Now I will proceed to download the binary to my STM32F746 discovery board. Of course now we will download the binaries to the internal flash and the external quad spy flash. So we see here that we programmed the internal flash and then the external flash memory. QBID didn't download the binary to this flash section, external flash section. Before I proceed to start the execution I will use the TADGFX environment command line to download the binary to the SDcard. I will start TADGFX environment and then change directory to the path of the binary. So the binary or the ELF file is located under TADGFX project STM32F746 SD cache bitmaps STM32QBID and debug. Next I will extract the images from the ELF file. I will use this non-EABI object copy, dump section, external flash section, images.bin that's the name of the target file and then STM32F746 disco.ELF With this command I will dump the external flash section from the ELF file to images.bin Now if I check the files here, if I go STM32QBID, debug, I see here that I have a new binary images.bin and this contains all the bitmaps placed at address 0xA000000 Now I will copy images.bin to my SDcard I will place my SDcard into SDcard reader I will copy images.bin and then paste it in the removal disk and paste it here OK, eject Now I will remove my SDcard and place it in the SDcard slot in the SDM32F746 discovery board So connector 3 Now that I have the binary available on the SDcard, I will start the execution Here I have my texture mapper animation working fine Thank you for joining me in this video and we hope that you enjoyed learning how to cache the bitmaps stored in SDcard