Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Oct 1, 2012

A tiny A23 or A27 ( 55 mAh) twelve volt battery starts the whole setup.
The huge magnet then drives the large 16 inch diameter iron magnet studded wheel. That heavy wheel acts as a flywheel. It in turn drives the huge magnet as both are magnetically coupled and synchronized together. Hardly any power from the battery is required to keep things going once the above happens.

For every 8 revolutions the magnet makes the large wheel makes 1 revolution. Easy to spin clockwise or counter clockwise as long as magnet or large wheel is turning the opposite direction.

A row of four series connected 120 volt AC lamps are lit.with stored spare power also..

All wiring is on the table top. Nothing is hidden under the table. No parlor tricks.

The battery is housed inside the left hand side bottom of the row of lamps. Look carefully and you can see it. I did a close up on similar battery so you can see its size

Pull the battery out or shut the device down with a switch and the setup takes a long time to stop turning. Please note: This is not overunity or perpetual motion but EXTREMELY EFFICIENT.

I would like to point out that the 4 lighted lamps are burning off the back EMF from the harvested coil voltage. This is a seperate operation that does not spin the magnetic satellite wheel. With the lamps out of the circuit the DC voltage spirals upward way beyond the capacitors 450 volt limit. Then the posibility of power box component damage exists.
Whoever finds a way to use this DC voltage to charge the 12 volt battery while the circuit is in operation will have the answer to a true overunity device. Are you that person?

Check out my newest or next video -- Satellite Generator-Magnetic Power Part 2 - I have taken this outdoors on a glass top table. I show a spinning fan blade in my fingers just by holding a shaft through the blade. Coupled in a VERTICAL position -not horizontal like the spinning magnet is. Used a larger 12 volt battery in event the wind would kick up even though it was a nice day.

Here are recent Watt power specs using a 12 volt regulated power supply plugged into a 2 percent accurate watt meter:

3 watts - power supply demand

3 watts- power supply and power box connected - no 2 inch magnet on coil.

4.3 watts- power supply, power box, 2 inch magnet spinning on coil.

4.3 watts - power supply, power box, 2 inch magnet spinning on coil, AND NOW THE HEAVY ( 3.47 lbs) 16 INCH MAGNET STUDDED IRON WJHEEL SPINNING!!!


Magnet spinning at 1132 RPMs all the time.

NOTICE - TREMENDOUS UPGRADE: Check out my latest video "HONKING ON OUT FANTASTIC SPEED" Posted 11/2/2012

Also check out the below links that cover most everything.




The next link is a spinoff from experimenting with the Sat generator







Any INDUSTRY interested in futher deveopment or manufacturing of this please get back with me through You Tube.

I have a 8 and 6 inch magnet wheel for sale if interested contact me for details. they are listed on E Bay presently 10/27/14 as
Free energy magnetic wheels..

Comments are disabled for this video.
When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...