 Ευχαριστούμε και ευχαριστούμε! Είναι Vicky εδώ με την νέα καρδιά! Θα εγγραφήσω με αυτήν την C-Six. Αυτή είναι η Ραστική Μπούκη και θα δημιουργήσω ένα πολύ ρεαλιστικό σχολείο. Για να κάνω αυτό θα χρησιμοποιήσω ένα νέο τούλκητο με C-Six. Θα ανοίγω να ανοίγω για εσάς, ώστε να μπορείτε να δείξετε τι βλέπετε. Έτσι θα δείξετε τρεις στυλούσεις. Έχουν ένα δύο νείμ. Είναι also a pair of scissors, as well as some tweezers and I will be using this kit in this video so you can see how everything works. Now there are also two different mats. One very squishy one and the t-l one which is quite thin. So I will be using this later on this video. Now I'm going to grab some paper so that I can cut out my flower and for that I will be using this paper by Ranger. This is distress mixed media paper. It's quite thick so it is going to hold the shape of my flower and at the same time it takes distress oxide inks beautifully. And that's what I'm going for. I will be using my distress oxide inks to color every part of my flower. So I'm going to cut out two pieces there so that I can cover up the die and remember this is a big die which means that it cuts out lots of thick materials so I can easily cut two layers of this cardstock. I'm going to run it through my die cutting machine and by the way this is my Cizix big shot machine. This is a limited edition. It has a gorgeous design and it is available. It is a UK version and I think it is available everywhere else but the US and Canada. So anyway you will find links down below in case you want to check it out and I also did a video review on that as well. So this die once you cut it once it is going to give you one bigger flower and a smaller one but I wanted to have lots of layers on my flower that's why I cut out everything twice so I end up having two leaves and four different flowers as well as two centers which of course I'm going to use only one. Now to color everything I'm going to use my distress oxide inks so first of all I'm going to apply some ink directly on top of my craft mat by the way this is a glass mat by Tonic that I'm working on. I'm going to spray with water and you can find the names of all the inks that I'm using every time on your screen as well as in the links down below. Now I'm going to use the center and just dip it in my ink there and since I had two centers cut out I decided to go for the second one as well. You never know maybe I will mess up but first when the second one will come in handy. I'm leaving these centers to dry and I will move on a clean area of my glass mat and this time I'm going to use these three colors and then again I'm going to spray water on top of them and these are the colors that I will be using to color all the flowers, small and bigger ones. Now notice that as I'm working on my flowers I haven't cleaned the area with the yellow and orange ink and that's because I want to dip those centers one more time when everything is dry and that's exactly what I will be doing with those flowers as well. So just dip it once, let everything dry and then dip again. If I keep dipping again and again before the first layer dries then all I'm going to do is to just mix the colors and I will not end up with that beautiful variation and depth that I'm going for. So now I'm going to apply some green colors on a clean area of my glass mat. I have first applied the two darkest colors that spilled paint and forest most, sprayed with water I'm going to dip my leaves there and then I will end up on the second layer you will see later on and that I added a lighter color which is twisted citron just to lighten it up a little bit. So now I'm just using my heat gun to speed up the drying process and once everything is nice and dry I'm going to dip them one more time on the inks that I have already on my glass mat. This way I will end up with more texture and more depth on my flowers as well as on my leaves. So I'm just going to clean my area there with the cloth and you can see how easy it is to clean and I'm going to apply a little bit of that lighter color that's twisted citron to finish off my leaves. With my blending tool I will go around my cutouts and I'm going to add just a touch of gathered twigs and this is going to get rid of that different colored edge and at the same time it's going to give a more realistic look on my flowers and my leaves. Now on the leaves you can add even more of that brown color it's going to make them look imperfect and it's going to add into that realistic look that we are going for. Now I grabbed my paper sculpting tool and I'm going to show you how I did one of those flowers and one of the leaves and this is the exact same process that I followed for the rest of my cutouts. So first I'm going to work on the black mat. This is the squishy one. I'm going to use one of my stylus this is the one with the medium bowl and I'm going to go around my petals this technique smoothly breaks the fiber of the paper and it allows the flower to become dimensional. I'm also going to use the smaller tip of my stylus there and I'm going to press at the center do that with all your flowers and leave them to side for when it's time to assemble them. Now I'm also going to use my tweezers and I'm going to turn some of the petals only the edges and in some areas just to add that realistic look. Now I'm going to move on to the leaves this time I'm working with the stylus that has that pointy tip and notice that I'm not working on the very squishy mat this time and all I'm doing is just using that stylus as if it is a pen and drawing let's say the vines on the leaves and I'm going to zoom in for you so hopefully you can see the result then I'm going to take these leaves and put them on top of the squishy mat and then do again the same technique where I'm using one of the styluses with the ball on one end and just adding dimension at the back of the leaves this time breaking the fibers then and adding lots of dimension and now I'm going to use my tweezers pinch at the center of the leaves and fold so this is a lovely touch at the end that is going to give lots of dimension and texture on your leaves I'm just doing the technique where I'm turning some of the ends just to give those imperfections and it's the same technique for pretty much every part of my flower so this is where I'm shaping the center of my flower and now it's just a matter of putting everything together so at the back of my center I'm going to add a foam square actually I did add a couple of them since it was quite dimensional I'm going to stick that at the center of the smaller flower and then I'm going to add one inside the other as I'm sticking them down I'm making sure that the petals do not overlap so one petal falls in between the petals of the previous layer hope you can understand what I'm trying to explain here this is going to give more dimension and more fluff on your flower this is assembled and ready to go now from this pad by Tim Holtz I'm going to use one of his metallic golden papers and I'm going to use that to cut out a lovely background for my card now these dies are designed by Cisix UK which means that most of the days that I'm working with today are not available in the US and Canada however don't despair there are two similar dies over your part of the world by Cisix which I am going to make sure to link them down below as my suggestions if you want to go with this look on your card so make sure to check out my supply list you will find there both links to European and US online stores with my suggestions now my card base is going to be a craft colored cardstock that's 4.25x5.5 and I have also cut out one of white cardstock that's slightly smaller than the standard card I used my Tim Holtz Distressor to distress the edges as you can see a lovely technique that I haven't done for so long I remember back in the days I used to do that a lot now I'm going to add a little bit of gathered twigs on my craft mat and with a brush I'm going to add some splashes on my panel just to distress it a little bit more and so that it's not as white I think that it adds a lot to the look that I'm going for now it's time to assemble my card I'm using my Nouveau Deluxe white glue at the back of my elements to stick everything down I love this glue just because it's not very wet which means that it's not going to buckle your paper when you apply it on top of it it dries really quickly and at the same time you do have a few seconds to move your elements around if you're not happy with how they are stuck on top so now I have glued down my flower now I'm going to decide where all those leaves are going to go it's a very versatile design it can be used for pretty much any occasion depending on the sentiment that you decide to go with now there is enough Naferia at the bottom right corner where you can stop your sentiment instead I decided for this card not to stamp anything in front I think that it's lovely as it looks so on the inside I'm going to turn it into a birthday card I'm going to cut out the word Smile and this comes from a Scissixta that's called Sentiments and it gives you 3 different words Smile, Dream and Hello so I am going to stick that on the inside of my card then I have cut it out from that gold metallic card stock so it matches perfectly the outside of my card and I'm going to stamp underneath with black ink the phrase it's your birthday don't be afraid to add dimension to your cards for that extra wow factor this is quite dimensional but it's not a card I'm going to send by mail I made this card especially for a dear friend of mine I'm going to hand it out to her along with her birthday gift but tell for sure that this would be a lovely Mother's Day card so that was the card for today I hope you had fun, you got inspired make sure to leave me a comment and if you haven't subscribed to my videos already make sure to do so thank you all for watching and I'll see you next time