 In this video, we will demonstrate how to assemble the Vong Eye. The Vong Eye consists of the Cap Dip Cap, the Vong Tip, the Crown, the Liner, the Sleeve, the Mouthpiece, the Standard Condenser, and six O-Rings. Two O-Rings on the tip, one O-Ring each on the Crown and the Mouthpiece, and two O-Rings on the Condenser. Please note that one Condenser O-Ring is slightly larger than the other. Place a small O-Ring on the inside double groove of the Condenser. Place a larger O-Ring on the end of the Condenser. To assemble the Vong Eye stem, insert the Liner into the Mouthpiece using the arrow on the Liner and a notch on the Mouthpiece as guides. To connect the Sleeve to the Mouthpiece, gently push and twist. The Sleeve will click into place. Insert the Crown on the top of the Vong Eye. The Crown will click into place. Insert the Condenser into the Mouthpiece end of the Vong Eye stem. Seat the larger O-Ring until it's flush. We recommend using DynaWax to lubricate the tip O-Rings during assembly. Now that your stem and condenser is together, insert the tip into the Crown end of the stem by twisting the tip. Finally, place the cap on the tip. Now your DynaVap Vong Eye is ready to be used. Thanks for watching this quick video on the Vong Eye assembly. Check out our other videos for more information.