 sure fits nice. That's probably a little overkill for what I'm doing. Four solar panels long. Look at that fit. So nice. So nice having a metal lathe. Yesterday I screwed up on this. I forgot to put the hardener in the resin and I got a significant portion of this done before I realized it. So ended up mixing up a little bit more resin with enough hardener to like do the whole thing and then I just rolled it in there like I tried to get it all mixed in. I think it may have worked. Yeah. Looks like it's hard right down to the bottom. Oh so nice. This roof mount is taking a long time. As every time the last few days I get the fiberglass out to make another piece of it. It starts raining. Right now it's just sprinkling but that's enough to make it so fiberglass is no good. So I'll keep working on this motor mount which is going pretty well. I'm gonna get this done before the fiberglass. I found two screws that fit in these holes so I can use them. I'm gonna have to cut this one shorter though. And this I checked fits in the boat tube. Oh speaking of the boat tube so I was concerned about the shaft hitting the edge of the tube if it vibrates you know over time might slowly wear through. I don't think and maybe I could just take this pipe which is about the same size as the boat tube cut a slot out of it squeeze it a little stuff it down into the tube and then you know the shaft can fit through this not touching it but if for some reason it vibrates and hits the edge it'll just hit this and not the plastic it won't wear through the plastic it'll take a long time for the occasional knock to wear through this. Nice and snug. I'm only gonna do two bolts because this fits so well in there it's not gonna jiggle at all there's not gonna be much force pulling on it. So next get that tube mounted on this thing that's bigger than this so I'll have to make a sleeve. Right now though dinner time. Alright got it. I have two whatever these things are called as long as all four solar panels lined up. Washing my hands off with lacquer thinner to get the any resin off them. But I have all these little cuts all over my hands. GARGH! BOO! It stinks! I've been I've been working on a top-secret thing in the mornings for the last two weeks. It's the kind of thing where I'm gonna have to do like a couple months before I have something to show. It looks like there's enough space in there to get a bolt in. There I got a second one of those up there to help make sure it's lined up straight. Don't break, don't break! Don't break on the way out. I miss my good tap handle. Looks like it's spinning nice and straight. See how this thing clears the bolt. Looks like it's good. Oh I think that's it. I can put this in the boat. Oh good stuff! Okay before I put that in I want to put this inside the sleeve that this goes in. That should protect the sleeve from any accidental rattling or bumping against the sides.