 Hi, I'm Nadia Chau, I'm a technology analyst with IG TechTax. I'm here at Cytosurge, so can you tell me a bit more about your printer? Yeah, basically we have here our Fluid FM Micro 3D printer. This is the printer which can print metal objects out of a solution at room temperature in the size of micro-objects, like one micrometer diameter for example, or even smaller or bigger. Sure, and is this the sample that you have printed? Yeah, for example you see here what you not see it's a triple helix, it's also on the screen, it's actually this one. It's a helix, it's a fairly complex 3D object with a diameter of 20-30 micrometers. It's the proof that we are able to print metal as 3D objects, because triple helix is one of the most complex things you can print. And what are some applications of this? The applications, as it's a brand new technology and it was never available for the industry. Our potential applications in this state, in the terms of biosensors or in the chip industry and for die contacting is a potential to make like micro coils or micro inductives for microelectronics also to print basically a coil direct on the chip. All these are potential applications. Right, and can you tell me a bit more about what you have here? Yeah, basically these are the tips, these are the print heads. It's very consumer friendly, I'm going to show you on this one, take it out, sorry. On this one we have a micro chip on the tip, this is basically an AFM cantilever and the cantilever is hollow, there is a micro channel inside where we can bring femtoliters of liquid to a specific room and so in our printing chamber. And these femtoliters we control and with these femtoliters we are able to print the metal objects out of the metal ions. Great, thank you. And so how has IDHACX helped you? Actually it's great because also from sensor industry people are there, many scientists people are here, from display industry people are here, like they're really a cross of different technologies. It's not only like 3D printing or not only sensors and this helps a lot, we had very good conversations, we had like until now 7 or 8 different application ideas. Which we didn't expect, so let's see what's coming up afterwards, but it was a great start. Right, well thank you for your time, it was nice to meet you. Thank you, bye.