 Video Friday with a resin. Hey guys, I've got a couple of tips for you in case your resin gets stuck in your silicone mold. One is to pop the mold out at the 24 hour mark before it fully cures when it's still fairly flexible. That's one tip. Two, try and use a silicone mold that's designed for casting and not one for baking because the casting ones are a lot stronger and they'll last a lot longer. But if you do find that your mold gets stuck, don't pull it because you're going to rip your mold. But here's a tip that Dave taught me. What you want to do is soak it in some hot water. So I've got some water here. It boiled a few minutes ago and I let it sit. I'm just going to pop this in here for 10 minutes or so. What's going to happen is it's going to soften up the mold or the resin and then I can pop it out. So let's let it sit. Okay, we're back 10 minutes later and the resin has softened enough now. That is just popping right out of the mold. There you go. Thanks, Dave. Hey guys, so a couple of our viewers suggested that you can also put your silicone molds in the freezer if they're stuck. So I tried it out. Let's see. Now this was super, super stuck in the mold. I'm going to unmold it and see if it worked. Almost there. I could not pull it out before. So this actually does seem to be working. Here we go. It worked. That's awesome. So you can either use really hot water to soften your resin or stick it in the freezer and freeze it. That's your tip. Video Friday with art resin. Oh, thank god that's over.