 Hello, this is Nick from Laptop Media and today we will show you how to open the HP Pavilion 15. 15EH 3000. To get inside this notebook you need to undo six Phillips head screws. Two of them are visible while the other four are hidden. You have to unglu the two rubber feet to gain access to the other four screws. After that, pry the bottom panel, starting from the back. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. The battery is a 41 watt hour model. The connector is built into the unit so if you want to remove it you have to wear gloves to avoid short circuits. The next step, is to undo the six Phillips head screws that are keeping the unit fixed, to the chassis. The battery lasts for 8 hours and 20 minutes of web browsing or 6 hours and 40 minutes of video playback. Given the small capacity, the result is good. The two Sodims can handle up to 16GB of DDR4, 3200 MHz RAM in dual channel mode. As for storage, there is just one M.2 slot that supports Gen4 SSDs. The speed of the SSD is limited to Gen3 values. There is a thin thermal pad below the pre-installed NVMe. The cooling system comprises one fan, two long heat pipes, one large heat sink, and a heat spreader.