 My name is Raleigh Miklasky and I'm explaining to plaque my jerk design to your camera. Let's go over to the camera. A note is a play base here on the bottom of the camera. We hook the plate to the camera. And make sure to tighten the plate under it to make sure the camera doesn't fall or break. That would be good. Second, again for painting, we want to paint something over for a video or a video film. And you can do it with this handle both ways. Or you can do it with these. Rehearing. When you see this set up, you are on air for bed. It's green, so it's in preview, right? Now this is a cover for the screen. It flips out like this if you want blinders. If that's good for you. If you don't want the cover. There's a button on here to remove this. This is a screen to turn it on. It's on the bottom left. It's on and off switch. I'm going to turn it on. It's on to the right side. This is brightness, contrast and peaking. Focus peaking is a real time focus mode. It uses the camera's live view focusing to highlight peak contrast areas. On the other side, you can see the reflection. Other thing is the name. This is cool because it's a touch screen. You can adjust the settings. There's two modes. The film and video modes on the camera are in the recording settings screen. For shutter speed, the fastest shutter speed and nearest angle on the black magic camera is 45 degrees. On the camera. If you want the blender, you can just put it on. If you don't want this, you can... This is the Alice, that's the main part of the camera. There's another one. There's two spots you can focus. The peaking mode is opening focus. Seeing up here, this is the manual focus of the camera. On the right side of me, there are different outputs or inputs of cables. This one we know is HDMI, which I'm going to unplug. On the left side, there's an internet, I think. There's a quick one to feature it. On the right side, there's more outputs. On the other side, there's a USB. These are actual cables. I'm showing how they push them in and out. Every year, I use a headset. Here's a switch thing. Here's the headset. You probably will see a double thing right here. I'm going to make sure the camera is level, which is not right now. Now it's level. You can see from over here. For turning down lenses, first, have to turn off the camera. Make sure this comes in. So you have that cap for this, so you won't break it. Breaking it all over down, which I'm not interested in, just explaining. You have to have the camera securely. You can put it down on your table to unlock the plate. On the left side, and the right side too. And the side backwards. Thanks for listening and watching.