 What's up everybody? Welcome to the edge of tech. I have not done a live stream in a long time that wasn't hot makes. So let me know if you can hear me, if you can see me, all the good things real quick. And then we'll keep, we'll get rocking, rocking. I see you, the gaming ham, a kuma, a kuma mod. You got one coming tomorrow or you got unboxing tomorrow nice. 3d p UK. Thank you so much for becoming a new channel member. Boom. Thank you so much. You rock. Good evening slash afternoon. Hope you're doing well. Thank you. I am a kuma mod says you're going to be doing yours tomorrow. Awesome, man. Hopefully all good. Okay, kuma mods is all good. I can, I haven't done a live stream in a long time like this. So it's time to get back on that horse. I got a lot of stuff I need to get unboxed and I thought live streams are fun. So I thought I would just pop in and do one on this bad boy. This is the flash forge m five pro. And I don't know a lot about this thing except for it's like I think it's 220 cubed. So 220 build area around and it is like 599. Other than that, it's supposed to be like the competitor to the bamboo lab printers from flash forge a little bit smaller obviously on the build plate. And I saw Joel did a video yesterday, I believe on Halloween prints using this machine. I saw about half of it, but I didn't see the whole thing yet. So as long as you can hear me as long as you can see me, we're good. The gaming hub. What's your resin budget? Nice. A kuma mods. Did you, did you get the big boy yet? I think you said you were getting one or potentially getting one, right? I think the star, the star field printer, that thing is a beast. I am going to attempt after this stream to go back over home to my house, clean an area in the garage. I think that that thing can live in because there's no way I'm getting it down here. It is like 130 pounds or something like that. And there's no way I'm not getting one here. You didn't get one. You might have to come up here. You could come up here and do a video if you want. We could figure that out. But that thing is a beast. I took some pictures. I threw them out there on the group and I think the shipping weights 200 pounds on the palette. It's, it's, yeah. It's, it's, it's, it's huge. We'll put it that way. Okay. It looks like we're doing good. I got, I'm going to do my best to watch chats. So today it's a little bit different because I only am running one screen. I took my second screen from this setup recently and I moved it to, well, this isn't going to work. I went full screen and that's not going to work because I can't see your chats. There we go. Jose, how are you? So I took my second screen and I moved it into another room to use temporarily for something and then I got all set up. I'm ready to go live and I realized I don't have my second screen. So I usually throw chats up on one screen. So I'm going to do my best to watch, watch chats. Okay. We're going to rock and roll with this bad boy. This is the Flashforge M5 Pro. It comes in a box like this. We're going to get this bad boy open maybe. Here we go. Here we go. Let me know if you have any questions as we go because honestly, I don't know a ton about this thing yet. Flashforge was generous enough to shoot this over to me and I really appreciate that. I just want to make sure my shipping stuff is not on those areas. There we go. I can give you a quick top down. That's what we look in the top of the box. This thing is tall up against that camera button. So we got the manual. We'll set that aside. It looks like it has an SD card in there as well. We have some foam. Okay. You guys see this. There we go. So we have some foam and these little cardboard edges just fell out all over. So that was cool. We got foam. We'll get that out of here and there's your printer. Just sitting in there chilling. You can see it. So if I do this, you can probably see it better. Boom. Just chilling. So I'm going to set this down. Grab a hold and pray that their plastic is strong enough to lift it out of here. Here we go. And that's it. There's nothing else in the box. Empty box from there. So there you go. Boom. I don't know which way is front yet, but we're going to find out in a second. How's everything look today? I'm using a new camera. So there's that. It's the first time I've streamed with this camera. So I'm hoping everything looks tight. It looks nice. I got my Batman coffee mug. Unfortunately, I just drank all the coffee right before the stream. I think this is $5.99 on Amazon. I did not look yet to see if FlashForge has any sales going on on their site, but I did put a link in the description below. Straight to an affiliate link. Full disclosure to Amazon and it was $5.99. So P1P area. Whoo. No desk wobble. There you go. Screen is crisp, perfect sound. I love it. That's what we like to hear. Color and angle are good. Yeah. I switched from Canon to Sony starting in June and I have loved the transition so far. It was a little hard because of all the lenses and I had three Canon cameras, that kind of thing. But I recently got, I had the A7C. Nice camera. Did really well. All the videos you've seen since June has been on that camera. Very good color. And then I just picked up the A7C2 and I'm digging it so far. I'm digging it. All right, let's do this. So I just got confirmation right now. Right now, 100% official. I have a official measuring specialist surveyor coming next Saturday. Discovery World in Milwaukee, Wisconsin. We are doing the Guinness World Record. Oh, I can't say that. We are doing the World Record 3D, Tallis 3D printed marble tower. And we're doing that officially next Saturday. Discovery World, Milwaukee. Matt, I know you're close. I don't know about anybody else. I know Matt's close. So you could come if you want. It's Milwaukee Maker Faire is what it is. So it's going to be awesome with the Maker Faire. Actually, I met Matt in person. Well, I met him before that. But 2019, we met at the Milwaukee Maker Faire when it was downtown. Now it's at Discovery World. All right. Or Akuma Mods. I keep saying Matt. What's people's opinion of water washable resin? I hate it. I don't know about Matt or Akuma Mods would be the guy to talk to about that. But I don't like it. Next Saturday, November 4th, Discovery World, Milwaukee Maker Faire, World Record, Tallis 3D printed marble tower is going to happen. Okay. Let's get this thing going. We are upright. That's good. Boom, boom, boom, boom. Yeah. Yeah, yeah, yeah. You don't want to. I'm not, I'm, I don't like water washable. I got the same stuff as Akuma Mods. Super brittle, not great stuff. 3DPUK says it's a good product, but very misleading. She shouldn't rinse it down your sink. Probably not. Probably not. So it comes like this. It is smaller than I thought it was going to be right away. I could, I could say that it's, it's similar to a P1P. But that probably has to do with the smaller build size. Oh, you want this? Hang on, hang on. I got something for you. This is for, for you guys. Ready? Oh, there's, there's more. Wait, but wait, there's more. All right, let me flip you back to here. We'll do this. Ready? Boom. So I can tell you right away this is acrylic, I believe, not glass. So there's that. The front one. Let's see if I can, let's see if I can give you some peel action there too. I'm pumped to get this thing unboxed though. Pat it for a little bit. I've had a lot of printers for a little bit. I will be getting to those now, like very quick. Screened? Yeah. So it does have a touch screen up here, it looks like. Pull that off. Sounds, sounds like my burn on, my bum on a leather sofa. That's a good one. All right, here we go. Let's see if I can get this one off. Oh, the door opens. I'm going on the other side. Ready? Ooh, there's so much static coming out of the top. When I do that, that's crazy. Another acrylic or, or probably acrylic door there on the front. Again, not glass but acrylic, which is not, not a good or bad thing. It's okay. Right away we have that in the top. And there you go. So you can kind of see what's up here. I don't know if I can just pull this all out. Maybe. Oh, yeah. So you can see they're hiding stuff in the foam there. This is one giant piece of foam. Look at this. That's a big piece of foam. All right, what do we got? We got some filament, which is high speed PLA, burnt titanium. Ooh, I'm digging that color. We got a power cord. Giant box. Hey, Matt, let me know if you're going to come next week. I have an idea. Chat me behind the scenes. I might need a witness or two. So I might be able to use you for a witness. I got to look up my rules. There's a lot of rules. So inset box. We can flip it over. And we got this stuff. Let's see if I can focus on that. Here we go. So it looks like we have adhesive, kind of like a glue or something, magic glue, something like that. We have a spool holder here, some tools here, and that's it. So oh, an extra hot end right here. So yeah, there's some stuff in there. So we'll get the instructions flying because if I was a brand new user, I would use them. I'm going to use them anyway, but SD card. It's a SanDisk 16 gig SD card that comes with it. Check my schedule and see. Sounds good. Don't pull on Uncle Jesse. Yeah, I'm not going to do that. I actually almost did the K1 Max today. It's sitting in a box over here. I need to get that done. But this one is, there's less on this one right now. So I wanted to get this out first. Okay, it says unbox it. Great. Take the foam out. We got it. There's a packing list. Okay. Install the spool holder. I'm not going to say this looks very familiar. The spool holder. You can tell me what you think this looks like if you've seen one before. I'm not going to say it looks very familiar. I'm not going to say it attaches identically, but it's very close. Very close. So I want me to do the spool holder first. Oh, fail. My T handles are at home. But they gave me some long Allen wrenches. Can you see those long ones? So that's better. And a nozzle unclogger. There's a nozzle unclogger in here. I like that. Okay. So first thing they want me to do is attach my spool holder. It goes right where these arrows are. I'm looking at laser engraving so I can engrave amateur radio call signs. Nice. That's cool. I have a video that's about to go out. Very quick here. It's a new product out there. I think the We Create Vision is what it's called. We Create C-R-E-A-T Vision. That thing is a solid diode laser. Pretty fast if you're looking for a diode. And it's fully enclosed, has laser glass on the top. Well, acrylic, but don't have to wear glasses. If you pop the top open, it stops engraving, which is a huge plus. So you're not going to go blind, hopefully, and your family, friends, whoever comes in are not going to go blind if they pop that bad boy open. All right. So here's the deal. This spool holder is... It's the spool holder. Oh, boy. I'm shaking like a crazy person today. Oh, come on. So there's a challenge here that's a little bit different than the other one I mentioned. They don't give you a... This is so weird. I wish I had my tea handles. I brought my tea handles home and used them for something and then I didn't bring them back today. Now I got to spend 10 minutes and get these in because this is kind of a weird, weird way to do this. Surprise. I wish I was at LBX. I couldn't get there. I have a lot going on and I couldn't make LBX work. I really wanted to be there though. Congratulations on everyone who worked hard on that event. I hope it's going to be awesome. I know it's going to be awesome. I wish I could be there. So I have this weekend to get ready for the record next weekend. I have... Next weekend is the record. Oh, my gosh. This is a little bit crazy here. I'm like, is there a smaller size in here? That is the smallest size they gave us. It just doesn't fit great inside the head of the screw and that's not making anything easier. Okay. So anyways, yeah, LBX Lightburn is putting that on this weekend. Super cool thing. But I have this. I have to get ready, make sure I'm 100% ready. Jesus Christ, I'm ready to go. And then I do... All next weekend I have... Wow. This might take me the whole stream. All next weekend I have Maker Faire Milwaukee and that's where I'm doing the record. So we're going to set up Friday. I'm going to do a whole bunch of filming and all the things on Friday and maybe she's... This does not want to go into that whole... Don't you know this is your home? So yeah, I have that all next week. I'm sorry, next weekend. And then there we go. Got it. And then the... Let me think. That's Friday, Saturday, Sunday because we set up Friday and Maker Faire Milwaukee is Saturday, Sunday. Then Monday I go back to work. Then Tuesday morning, super early, I fly out to New York for an event that's out in New York. So that's going to be a lot of fun. I got invited to an event out there. I don't know if they made it public yet. It will be public soon. So I don't know if I can say what it is yet, but it's a pop-up event. We'll call it that. It is warm in here. Okay. After much fiddling, the rear spool holder is on. You can see here. Let me know in the comment what you think that looks like. What else we got? Unlock the build plate. So the build plate much like the other machines is locked in there. Let's see if I can show that. I'm not sure how much you're going to be able to see it, but I'm going to attempt to do it so you can. Hey, it's another piece of foam. Let's see. So I'm going to do that. Actually, since we're looking down like that, I might as well make it easier on myself. There we go. See if I can get any more light here. I don't know if this is charged. It is. Let's see if this helps. That'll help a little bit. Okay. So it looks like there's one, two, three, four that I need to get out. That's crazy. I just saw Matt's comment there. Yeah. So yeah, New York is going to be fun. I'll be there. I'm flying in Tuesday, flying back Thursday morning. Dude. Hang on. Maybe I've got to get the right size down wrench here. There we go. So here's one over here. What is up? Tunkany? Sorry if I killed your name there, but what's going on? All right. So one shipping lock out. Going for number two over here. Let me know if you have any questions in the chat. Two shipping locks. These are tougher because I can't see them. That's the first 3D printer I've seen that's secured like that. I'm not sure if you're making a joke or being serious. You're talking about with the shipping locks on the plate down here? Gaming ham. That is a new pronunciation. Uh-oh. How do you say it? Can you type it phonetically? Sorry if I killed you. Serious about the shipping locks. This is how all the bamboo lab printers ship. They're all locked down like this with screws that go down into the back and the sides of the build plate so it doesn't move. The problem is with these, they're not coming out. Okay. Got one. Okay. There's number four. It's gone. It's gone forever. It fell down there somewhere, but I got it out. So once we lift the plate, we'll find it. So shipping locks are now removed. Spin this bad boy around. Get my light out of there. Go back here. Shut this little light off. Okay. So shipping locks removed. I need some water. Water. Let me know what you're drinking if you're drinking anything special. All the shipping locks are done. Now it says we're going to pop the power in this bad boy. So I'm going to come over here with that and put the goodies right here. Instructions over here. I'm doing that because my power's on this side. And we got their filament. We're going to try a high speed filament. So we'll go like about right there. And let's see. We're going to plug this bad boy in. I wonder if I need to make sure this is, so it does not tell me I need to make sure that I'm on the correct voltage. So we'll see what happens here. So I plugged it in. Oh Jesus. Thank you. We are starting soon, 30 minutes ago or whatever it's been. I appreciate that. Sorry about that. Boom. Boom. Mauser, you win. Okay. We're going to fire this bad boy up for the first time. That's what it says. Now it says there might be an upgrade in the firmware. Turn the power switch on. Follow the instructions. So power switch is going on. Hopefully we'll push that one. We'll have power. Maybe. Oh, it's doing something. I see it. Okay. Well, thank you for correcting me. Something like, am I saying tune G or tune Jai? Am I close? I have terrible names. I'm going to throw it out there. Tune Jai or G? Nice. All right. Nailed it. All right. I'm going to spin this just for a second so we can walk through the thing. So it says English. Next. Please confirm on the packing materials we're taking out and the printer needs to do a calibration. Next. And now we have some time to talk about it because it's going to do a calibration. There is a timer counting down right now. I could probably get you, how far is this going to go? I might be able to get you a second view if you guys want to see it when it's rocking. But we'll get there. So it's doing its thing now. It's doing its thing. I'm going to get this unboxed and started. This is the filament that came with it. No, not Jai. The second one. Tune, not G tune. Tune G or tune Jai? Well, thank you. I tried. You said it almost correct. Never heard someone say it. Thank you. I attempt. I am, I'm admittedly terrible, literally terrible with pronouncing names. So got it. J tune J. J. I love it. We should just turn this into Jim tries to pronounce names because it would be pretty, pretty entertaining. That's going through the calibration there. It's doing its thing. I'm just moving some stuff around because it's in the way. Okay. So currently, I can't move this thing, but it's doing things in there. Let's see if you can see this. Does that help? There you go. Oh, stay open. Good. Yeah, let's not have Uncle Jesse Mom. Oh, it's acrylic. That won't happen. Man, this color is incredible. I think I want this to be my, this needs to be my like official edge of tech color because now back to the printer. That's funny. Well, I tried. I definitely, you know, it was worth it worth a shot. So it's running up the vibration stuff now it looks like. Now back to the printer. Mine is so bag standard. Nobody believes it. That's funny. Check this out. See if I can get you a good view of this of this printer of this color. Oh, I can't. Oh, you can kind of see it now in the reflection up there. My, this is gorgeous. Like, I don't even know. I don't even know how I can show you how nice this is. I am in love with this color. I think I want to see it print, but this stuff is sick. Josh Smith or John Smith. Sorry, I read that wrong. John Smith. That's perfect. I mean, it's like Jim, right? Man, my glasses are, I must be warm because I'm like fogging up my glasses here. What do we got? Never believe what temperature is in here and I'm over here sweating. So I just realized something. We'll have to fix it. I can't show you because of I don't want to move the printer while it's doing this, but the, but the PTFE tube is not down in to the hot end like it should be. It's just hanging there. So I'll have to fix that. If there is a backlight or UV resin, blacklight or UV resin, there is and there's additives that you could probably add to your resin to make them like that too. That's their new filament. Looks so cool. Yes. I'm going to have to check this out. Burnt titanium is the color here and it is on the spool. Gorgeous. I can't even, I wish I could like actually show you how cool that looks. Is that what a scammer would say his name is? My name is John Johnson. That's funny. John Johnson. Hello, my name is Alex Smith or my name is Bob. I don't know if you guys watch scammer payback or Kiboga or any of those channels, but they're hilarious. If you ever want to play, if you ever want to watch someone messing with scammers, check out any of those. There's a bunch of them out there. A scammer payback is a big one. Kiboga is another one. So currently we're just waiting. There's a countdown on the front, but I can't see what it says because I'm not in the front. Four minutes it says. Four minutes. So the interface looks pretty decent so far. We're going to have to see if there is a firmware upgrade. We'll check that quick. I'm not sure if they're OTA or not. So we'll find out. We shall find out. But it is bothering me that the PTFE tube is not in here and I can't, I don't want to touch it. I want to touch it, but I don't want to touch it. There's an LED light in the top. It is right here facing back towards the print, which is nice. It's actually angled down a little bit. So that's nice. Peroghi is awesome. Yes. Peroghi is a blast. Yes. Brasco. Nice. Yeah. Trilogy media. Okay. I'll check that one out. Let's see. All the good stuff here. There we go. This thing is just counting down. It's doing its thing. It really vibrated the table real good. I'm trying to get over here. Two minutes 44 seconds currently. I'll tell you. I just want to check this out. So it's doing vibration right now, it says. Next we have completed. So it looks like two minutes and 28 seconds of vibration. To be honest, that's all I need. Oh, the printer is what I'm at, the printer. You guys are terrible. Terrible. I'm going to see if this GoPro has any battery. Yeah. Cyber security guy. This is my event on the fourth or the fifth. It's all weekend, but the actual, the official, what is it called? The official record will be on the fourth. Otherwise I'll be there all weekend. There's no battery in this one. Let me see if I can, let me see if I can get battery going here. Otherwise, I'm not sure it'll matter much right now, but let me see. 83. Trying to remember where I put all my GoPro stuff. It's been a minute. Yes, I will find and retrieve. Thank you for that. I will find and retrieve that last screw. Absolutely. It's down there somewhere. Currently I was like, oh, you know what? I should probably set up my GoPro so you guys can have like a second or a third shot of when it's actually rolling, but unfortunately I didn't put any battery in it because I wasn't going to use it today, but I'm gonna. So let's see if this battery is any good. It's a big fat no. Take that one out. I'm just going to go through them all, check them all. I haven't used my GoPro in a while, so I probably should have charged all these up. If not, we don't necessarily have to have it, but it's always nice, you know. Nope. We got battery on one of them. I'm going to shut it off for current time. Boom. Just followed you. Nice. Come on, turn off. There we go. Let me grab this here HDMI cable. I'm going to plug you in. Boom. Now we have another camera if we need it. So let's see what this thing is saying. I don't want to move it too much, but I'm going to slide it underneath the here screw screw screw. I know you're in here somewhere. Oh, I see it. That's an odd place for it to roll. It is somewhere where that's that's silly. So it dropped down and rolled underneath the back of this bed. I have an idea to get it. Let's see if I can. I got to push it out of there. So that'll be interesting. Right, right. After I said I want to not move this thing too much, because I just did the calibrations, right? So the screen is saying, please load filament now. We are going to do that. But first, first I want to push this screw out of there. There we go. Elusive. They got some places for these screws to hide, I tell you. I can see it now at least. I wonder if I can, it rolled back under. That is silly. So there's like just a big enough gap where the screw can, it fell in sideways, believe it or not. And then it goes underneath the bed and it gets stuck. There we go. Nailed it. I'm sure it's fine. Calibration is still good, as I'm manhandling this thing. Okay, it is out. Found it. That's my special sound, you know, ninja sounds and stuff. Let's see. I'm going to move this so you guys can see when we're rolling here. Close. Okay. So right now it wants me to load some filament. So I'm going to do that. But first I need to drop the PTFE tube. See? This was just hanging, hanging around. It should go right there. Maybe not. I mean, it should go in there, but it's the coupler's not coupling it. Or maybe there's no coupler. Let's go look. Let's go look real quick. Just a little manhandling. It's how we roll, right? Here we go. It's in there. It looks like it just floats, by the way. So it wants me to load filament now. That's what we're going to do. This is gorgeous. I love it. It's supposed to be high-speed filament. It does come with a SNP, so I am going to SNP the end like I always would at a 45 or a very sharp angle. No magic chain, or magic chain. No magic chain. No magic smoke yet, Shane. Okay. Whoa, whoa, whoa. So Shane, next Saturday, Maker Faire Milwaukee next Saturday. We're doing this. Doing the record. Okay. So it says insert the filament. We're going to go to load. Now it says, right here, oh, you can't see me. Now it says it's preheating the filament. This is your interface currently. So it has nice pictures. It says preheating. It's going to go to 145 degrees. And then it wants us to stick. I mean, it pretty much gives you step by step. Let's see if I can get it focused, though. Step by step instructions there. This is the interior. There you go. You want to see the hot end? Let's get up in there. There you go. There's your hot end. So it says, heating completed. We're loading. And it's now dropping some filament. So there you go. It's me-proof. That is funny. So it's still loading. Looks like it's really loading. I mean, it's dumped a lot down there. Okay, it stopped. Now it says print. So we're going to hit okay. And what I'm going to do real quick is go back to here. Okay. Oh, so it went to print right away. It's not even giving me an option to do anything else here. Like I was going to check the firmware and stuff, but it did not give me the option. It's jumping right into your first print. There we go. I'm not sure what view is going to be the best. This one is going to be a good front. But yeah, so it's jumping like literally it just jumped in. It did not give me the opportunity to stop. It also says use the stuff on the platform. Users must apply glue to the platform to improve adhesion for their first print. Oh, you didn't give me time. There's no time. It literally looks like a glue stick kind of thing. I don't know if anything's coming out, but we're doing it. Is anything coming out? Kind of. This is odd. It's kind of like an applicator, a glue applicator. Where are you? Sorry about the crappy angle. Where you push down the top, and it's supposed to let some out, I think. Here we go. All great. It's kicking up. It's going to take my hand with it. Hopefully, hopefully that's good enough. It didn't give me any time. Whoa, it didn't. Watch out for that. And Jim falls down. It literally didn't mess around. There. That's not going to be good. It is doing a cube currently. And here we go. Not really going to be able to see the cube. It does have cancel print options, but if I was a brand new user, it just went straight to the first print. It didn't give me, like it didn't tell me what to do. So I'm looking at, yeah, I'm looking at the instructions and that is what it is. All right, I'm going to move this box out of the way. We're cruising. It looks like five minutes in here. Let me show you what I'm seeing. So this is the screen here. So color, full color. Four minutes. This is a cube we're printing. It's 25, 26% done already. You can see your options over here for heating. There's a light option, a fan option, more stuff over here. But I want to point out, I didn't even put the SD card in yet. So this was right on the front. Oh no, the gaming ham, I hope you're okay. Flood and evacuation orders. Hopefully you're okay. And Mauser, maybe. All right. Here, that is the cube being laid down. We are 40% done. Stay high and dry. Yeah. Whoa, whoa. What do you think? Is that a good view or would you rather have top down? Not bad. I can fix that a little, but I'm like, oh, cattywampus here. There is a power button on the front, by the way, right here. And it does turn the power on and off. I touched it on accident and it said, do you want to power your printer off? And I was like, no, I don't. How noisy is it? Good question. Is there a camera in there as well? That is another great question. Don't know. I have to go look. There is options for one. So let me go play with that. I'll look inside of there in a second. Maybe we'll jump on. Maybe we'll jump in left here. Yeah, there is. Right up there. Let's see if I can get you in there. Right there. There is a camera. So it looks to be that you can see a camera here. I'm going to change views to this one and swap this over here. So someone asked me how noisy is it? I'm going to stick my microphone inside of here and let you hear it. If I shut all these, it's not at all. I mean, it's not bad at all. So listen, if I open this just a click, hopefully you guys can hear that. If I open the top, so hopefully that helped, hopefully that helped with sound-wise. Stephen Poole, what's up man? So this has got less than a minute and it's just about done. I was showing it here. Yeah, it's mostly all just, for me, it was all just a fan, mostly fan stuff. So I'm going to hit okay. See if I can get this off right away. I can. And we'll go take a look at it quick. Now, I might need to set this thing up to my Wi-Fi. What camera are you seeing? All right. You're going to see my back just for a second because I don't necessarily want you to see my Wi-Fi info. There's that. Matter of fact, here you go. I'll show you this while we're here. Oh, I need more light. It looks like. All right, I'll have to get a better camera for that. I can, I can fix that. Just setting it on Wi-Fi right now. Yes, it's I Love Printing 97. No. All right, here we go. So that was the bottom first layers. I'll have to go check out, scan or paybacks any video for sure. That's the top. Pretty solid there. Very nice top. It's kind of hard to see this filament, but I can tell you it is freaking nice. The color wise, it's so nice. So it's not a bad cube. So I am now connected to my, my microphone is all jacked here. I'm now connected to my Wi-Fi and I'm going to go to like settings and see if there's a firmware update here just to make sure because there probably is. This thing's been in a box for a minute. So we did, we set it up. We did the first print got that done. I can come over here. That's fine. We got it. We got the first print done and like literally as soon as I turned it on and had me load filament and then shot into a print. So they want you to use this and I can show you what it is closer up. It says 3D printing adhesive. I believe it's like a liquid glue stick. 50 milliliters PLA, ABS, ASA and PETG. It says the latest version. All right, we'll go for it. Let's see. We got, we have, let's see what we got on the card. Let's go print something else now. Maybe I got to find where I can actually print something from. I have info, the spools. Oh, there we go. The models. There we go. On the SD card. Is there anything? Test files. There's cookie cutters. A scraper. A starfish mold. I was thinking we were going to get a benchy. There we go. There is a benchy. Let's do it. It says it's 14 minutes. So this is going to be interesting. Let me check the camera here real quick. All right. What I might do for the benchy is set up both cameras or maybe just set up the one from the front so you guys can see it better. Any questions? I'm going to pull up the specs here in a second. Looks like it's like curled on one corner. I don't see that. I can show you again. Give me one second here. Just trying to see how fast this thing is going to start. All right. Let's go look. Let's go look. Uh-oh. The boss is checking. Okay. Good. Great. I just saw the scanner payback notification literally right now. It must be listening to us, right? All right. Someone said something about curling. It's kind of a weird way to show it, but I didn't see any. I'll show you both sides. I don't think so. I mean, and this stuff is really nice. I love that color, by the way. Kind of a weird way to show that, but GoPro's got to love them. So this supposedly is a 14-minute benchy. That's going to be cooking if it is. Yeah, glue stick residual. There is that just a little bit in this region. Definitely glue stick residual. So in the box it comes with, like I said, a few things, a cutter, your Allen wrenches, and Allen, a filament unquagger. You got a little white lithium grease or white grease in there for your lead screws. Had a piece of filament stuck on there. It is now doing some leveling it looks like. Looks like four points across. Kind of fast, right? Kind of fast. I need to grab my, I'm going to grab my keyboard. Actually, let's see if the stats are in here real quick. A lot of times they'll put them in here for us. All right, here we go. We have precision says 0.2 millimeters. Test on 100 millimeter cube. Layer thickness 0.1 to 0.4 millimeters. Build volumes 220 squared. The 220, 220 by 220. The nozzle is 0.4 standard. You can get a 0.6.8 or 0.25 optional. Printing speed says 10 to 300 millimeters a second with a 20,000 millimeter squared or second squared acceleration max. Max travels 600 millimeters a second. Max temp on this nozzle is a 280 or 280 degrees Celsius. Let's see. Has Wi-Fi and USB. Yeah. Slicing software. Flash print five. Orca, Prusa, Arcira. I love that they're putting Orca in here now. I'm going to definitely use Orca for this. One click auto leveling, filament run out reminder, power loss recovery, 4.3 inch touch screen, video remote monitoring. So there is that time lapse video. There is that air filtration. If you have it stuffed down, I bet automatic shutdown. So yeah, there's a lot of good stuff here. A lot of good stuff. All right, we're off. Let me get this other camera set up. I'll give you the top down view and you can see how fast the head is moving. I'll get this camera set up. If I can, if it doesn't bounce around too much. So it is cruising. There is a little, there must have been a little bit of something on the nozzle there. I can see it in the back corner of the print. I'm trying to get you in there deeper here. This is dicey. We're going dicey, but it's for you. There we go. Mouser no worries. Yeah, yeah. The gaming ham. I love this color. Yeah. So this supposedly is a 14 minute benchy. We're going to find out. Let me know if you have any questions. This is the Flash Forge M5 Pro. And I have to say so far, this is the second print, but I mean, it's solid so far. Jake from State Farm. What? Here, I'm going to shut that down. Welcome. Let me guess. You're wearing khakis. So let's see. I don't have my keyboard over here. So I'm going to get, I'm probably going to get this set up on an Orca Slicer because I really like Orca Slicer a lot. And I'm probably not going to use Flash 5, whatever, Flash Print 5 or whatever they call their software because I like Orca Slicer a lot. So that's what I'm going to do. Let me see. There is another nozzle. Let's see what it is. It might have just been an extra though. And I can give you a shot of the nozzle as well. It does not tell me what it is. I don't think so. It says it says Max Printing on this is 280. Oh, they gave us a .6 nozzle. That's what this is. And I can show you. It looks like a quick release nozzle. And if you want to see what that looks like, this is what our nozzle looks like. Let's see if it focuses. Come on, focus to you dummy. Maybe it does not want to focus, but that's what it looks like. It looks like it has a plug in the back here. I'll do that. There we go, .6. There you go. It has a plug in the back. So that's what we look like. Boom. It is rocking the table here, but it is a .6, which is nice. Yeah. You're right about that, Matt. I am not sure that this is that. It does say in the quick start guide here that the Max is 280. So if you're doing like PETG and that kind of thing, you're probably not. I'm not going to have an issue. So it says it can run just so you know. This is what it says. PLA, PETG and TPU on the .4 nozzle. ABS, ASA, PLA carbon fiber, PETG carbon fiber on the .6 and .8 nozzles. So there you go. Now does it, the Max platform temp is 110. Max extruder temp 280 is what it says. So I'm not sure if the .6 or .8 have a higher nozzle temp or something, but it looks like it says Max nozzle temp is 280. This thing is cruising. I mean, I don't think it looks terrible yet or bad at all and can't see it from my angle too good. But I mean, if I show you this view, you can see that head is moving. Boom shaka laka. Let me see. How long do we got here? So we're 20% in or at six minutes of 14. Six minutes of 14 minutes. Any questions? Again, this is the Flash Forge M5 Pro 220 by 220 by 220 build area and it's fully enclosed with acrylic panels. Looks nice. Let's not shut that. We'll see how this Benchy turns out. It's a 14 minute Benchy is what it says it's six minutes in currently. We'll get the time off the front of the officially of what it says it prints. They did away with different temp nozzles and made it high temp across the board. Kind of cool. It comes with a .6. Yes, I like that it comes with the .6 as well because when you're printing fast, you know, that might help or if you want to print bigger. But as we've seen with like the bamboo printers, your prints really don't get any faster on those printers with the six or the eight nozzle because you're already you only can push the plastic so fast, right? On the slower printers, it was you get much faster speeds because you got much bigger bead. It is going to be faster because of thicker layer heights. But yeah, I managed to annoy my bin men and I had a half filled my recycling really full of failed prints. I love it. I'm glad I've seen you were live with this looking at picking up another printer. And even though bamboo lab is popular, not sure I agree with the cloud junk. Totally, you know, totally up to you on that stuff. There is a camera. There's a light. I haven't tested said things yet on this live stream. But there is a camera. There is a light. It does work in orca slicer. It says in that I love that we will be using orca slicer with this. You can print to it over the Wi Fi. You can print to it with an SD card. Both of those are true on the bamboo lab printers as well. So it's so far it's solid. I love it. The size is nice. It's not giant. So if you're if you don't need a bigger build area, because this is only 220 by 220 by 220, you don't need a bigger build area. This thing is, you know, first impressions are very good. I over the long run, I can't tell you, you know, what it's going to do. But first impressions are pretty solid. The interior looks very similar to other printers out there. The bamboo printers are wasteful with you're talking about the purge and stuff. They do cut and purge. Yes. Obviously, you don't get multicolor options with this unless you go to a different solution. So there's that. But honestly, if you're just looking for something to rock and roll on PLA, I mean, this thing will do 280. So it'll do a lot of the filaments. But if you're just looking for something to rock and roll, this thing will do it so far at least. I love it. That would be awesome, Mauser. You imagine a fast printer that's like Ivan Miranda's size, though. That would be sick. You'd have to use like a 1.1 or actually probably a 1 millimeter nozzle and like 2.8 or whatever. And that would be awesome. Or just pellets, straight pellets right into a feeder. I love that idea. This thing's cruising. It's almost done. What do we got? We're 11 minutes into 14. It's 45 percent done is what it's saying. It's finishing up the hole there, the front there. And I love this color. It is sick. What do you think, Chat? You digging it? Not so much? You like it? You don't? What are your thoughts? Do you have any questions as I walked away from you? Looks good. Don't mind me as I check prints in another room. Good, looking good, looking good. Everybody's looking good. Okay, good. I'm working on some last minute stuff to bring to my table next weekend. Pellet fit nozzle. Yes, I love that. Big nozzle and print chairs. Yes, 800 by 800 with that new Elegoo printer. To me, I have a 500 rat rig over here that I'm working on and still and it's big. I'm digging that new 3Di industries. What is it? 1,000 by 1,000 by 1,000? I think it would be ridiculous. I'm liking it and my only question can be answered by checking to order. I'm not sure what that means. Better option than K1. I don't have a regular K1. I think a lot of people do and I think it has issues out of the box. I have a K1 Max, I haven't opened yet, but I don't have a regular K1. This is $5.99, so you're getting the same price as a P1P, I believe. It's enclosed, camera, all the things. You can get a P1S, which is bigger build area with no AMS and you're, I think, just over this, but I mean that's 256 cubed. But I think, honestly, looking at this printer, first impressions, it's pretty solid. There is an Ethernet port back here too. I just noticed it. There's an Ethernet port in the back here, so that's cool. Plugged this bad boy in Ethernet. I had that Comgro T500. It was huge. Yes, it is. I missed it. Is the filament holder on the back? Yes, it is. Right back here with this gorgeous filament on it. Price $5.99 on this bad boy in the Amazon link. I did not go to their website yet and look. I need to do that, but I haven't done that yet. We're getting close here. We're getting close. A little bit of stringing. I see just a little bit of stringing between the top here. We'll check that out when we're done. We're talking a 14-minute benchy here. What's crazy is these fast benches are faster than, they're so much faster than the printers we had before Bamboo Lab came out. Not only that, but they are nicer than some of the two and a half hour benches I've seen, which is crazy. You're seeing a benchy in 14-15 minutes. The A1 does them in about 12. After the leveling and stuff, it's about 12 minutes print time. I'm telling you, they are better than the printers we saw by a long shot. Some of them by a long shot. In two and a half hour benchies, it's an experimental and exponential. I can't talk is what it is. Exponential and improving us. That price range, I was figuring. I like what I see, but I can't afford a proper print farm instead. But until I could afford a proper print farm instead, my Cobra Neo combo is wishful thinking. Nice. Went from 80-20 extruded hobby toys to actual 3D printers. Yeah. I don't disagree there. It's rocking now, so we're getting the top posts here, as you can see. Pretty soon we're going to see that bridging and actually see how the cooling goes. It is, there is a massive side cooler. It is like the whole side up here. I'll give you a close-up when we're done with this print, but you can kind of see it on the screen. If you're looking at the screen to the left side, you can see the duct for it. It is huge. I can hear from my disabled mom that I had to save to get a decent 3D printer or laser engraver. I always say this, start where you can, create a budget, and just work until you get to that budget. If you get what you want first, but it takes you another few months to get there, you're going to be much happier than just settling for something cheaper because you have to, and then doing something, you know, basically not getting what you want, right? Avocado atrocity for helping upset my under 3D, like two years ago, maybe three years ago. I appreciate the info on the content. Thank you so much. I really appreciate that. $4.99. Thank you. The side cooler is a nice surprise, yes. Thank you. Thank you again, avocado atrocity. I'm not so worried about the camera, but everything else, yeah, I'm wishing I had one. Here's my thing. I don't know where's my cursor at. There it is. I might have to open up and connect to this thing and see how the camera is, right? Is it great? Is it bad? I can't, I haven't looked yet. So once I get this thing connected, there we go. We're doing the bridging now. Oh, we already rocked the bridging. I missed it. What do you think of this color? I'm going to give you a close-up of this color, but it's like purple, blue, glitter, like greatness. It is so cool. That must be the most beautiful Benji ever. Hello, everyone. Red Light was a Flash Forge Adventure M5M Pro 3D printer. Is that Canadian? I will say Canada. Canadian, Daniel? 830.94. Bridging went quick. Yes, it did. That was fast. I believe that's 830.94 in Canadian, if I got that right. It is, I believe, 599. Let me grab my keyboard and we'll open their actual website and see if they have a discount or anything going on. But the link in the description is my Amazon link. Feel free to use it if you're going to pick one up. This is not a review. This is a first, unboxing first print setup, that kind of thing. So I cannot like, I have not used this thing long enough to tell you go good at it or anything like that. But I can tell you this, initial, initial impressions. These things, you know, pretty solid. As far as initial impressions go. I did two things, almost. So here we go. I'm going to the website real quick here. By now, it is 599 on their website as well. So in my opinion, you do you. I don't believe I have any affiliate with Flash Forge that I know of. But I do with Amazon and Amazon's great. So yeah, I should, now that I have my mouse, I'm going to jump in and I'll link this up to my orca slicer and we'll check it out. But hopefully it's a decent camera. It does not say, I don't believe it tells us, you know what, we can check the Flash Forge site. Maybe it'll show us there, huh? Boom. But I just closed it. Bye now. Bye now. It's got a quick detached nozzle. Oh, that's sick. We're going to check this out when it's done and it cools down right before we get off the stream here. It looks like you just grab the two prongs and it drops out. Oh, it's done. It's done. Whoo-hoo. Oh, it made a little jingle. Pretty silent. Not too bad. Pro grade, pro grade consistency. I've seen if they say anything about the resolution of the camera here. Remote monitoring camera, that's all it says. I don't see anything about what resolution or anything like that. So let's go around and see real quick how long this thing says. Time used is 21 minutes total. But I believe that is with, I believe that's with the, what am I doing here? Leveling and heating up and all that stuff. So there is the monster and of course I changed, so I can't see what I'm seeing. But there it is now. I'm going to get this thing off. We're going to check it out. It is a flex plate. Came right off with that glue. Yeah, not bad. Let's check this thing out. Get out of this. Yeah, it does not say. There we go. I have to thank you again. I dropped in on a stream seeking help on under three pro. I never got direct help, but I eventually did it. Get down in friction. Talent is nice. Several vids and you and others made a lot of nice. Good, good. I'm glad you found the help you need. And that's awesome. A bit of stringing left. Yeah, that, that, that happens. Revo cool, cool swap. Don't quote me on that. Yeah, we're going to find out in a second. Hot end should have a 300 C limit. I believe 280 limit will be a negative effect on sales. You never know. It really depends what people are going to use this thing for, right? So let me, let me do this. This is our benchy here. I can get it in the GoPro camera here. So it is not bad. Not bad at all. We've got the most of the letters on the bottom there. If I can get it in the reflection, there we go. A little bit of stringing. I don't, let me know. I can't see it from here, but I have my monitor turned down pretty dim. Let me know if you can see the stringing. There's just a little whispies in there. I don't know if I can show it, but there's just a little bit. I mean, nothing, nothing at all bad. There's one right on the back. I don't know if you can see it there. There we go. Yeah, this color is sick. There's a good transition, like blue, black, kind of a purple. It's sparkly, but you know, this benchy though came out pretty solid, but the smokestack, let's see, smokestack there. See that? Looks good. The holes look pretty holy. Round is what I'm trying to say. The bridging looks good. I mean, I'd say this is a gritty dang solid benchy all the way across the board here. There's only a little bit in this, this bottom one here, and I know there was some stuff on the nozzle. I should have checked that, so that kind of gunked up a little bit, but dude, solid, solid. Let me know what you think. Got a little cube, a little benchy action going. I love this color. I can't tell. It really depends on the light. If it's purple, if it's blue, if you see the sparkles, if you don't, it's just colors. Gorgeous. I like it. Should I got a washing cure station before the resin printer? It's a good idea to have. They make life simple, a lot more simple. I think it's like, I don't know about before, because you could just use the sunlight and a bucket full of IPA if you really want to, but how is the print on the boat's back? Oh, the print, the print, print, print, print. How do I show this? It's there. I can see that it's kind of there, but it's not like, let's see. Can you see that? It's so hard to show. I get it close, maybe. It's there, but not quite legible in my opinion. Oh, there you go. Looks like my dad is calling. So it's not bad. Weather's unpredictable. Yeah, yeah. So that is that. This is the FlashForge M5 Pro. Don't forget to add your liquid glue stuff. You know, not too bad at all. I'm going to get some stuff sliced up in Orca Slicer. We're going to get this thing tested. Oh, I was going to show you the fan real quick. Let me take you for a journey here. Do you see that fan duct there? Right here. So there's a big fan. It looks like it's right there, and then it brings up to a quite large fan duct. Yeah. So, oh, we were going to talk about replacing the nozzle. Let's see if I can show that. I don't know how, let's see how hot this thing is. 56C still on there. So I'm going to raise this thing up. I'm going to bring it closer and see if I can see if I can drive. Can you drive this thing? I've got to be able to drive it. There we go. Try to get a better view. It's really blown out. Sorry about that. Let's see if I can. There we go. That kind of helps. So they say you can just press these two buttons here and it'll fall out. I don't want to burn myself too much here, but let's see what happens. Oh, you pull them towards you with this, and thought maybe it would just come out. Maybe we can't have filament in there. Does it say any instructions? How to change it? Just yeah, I know it doesn't. They say it's quick swap. I have no idea if we can't have filament in there, though. Might need to unload it. Yeah, it's definitely not quick swapping, but it could be because there's filament. See these two handles? You pull them towards you. Yeah, I think you're right. We got to extract the filament. I know with the revos and stuff, can't you just pop them down and not do that? So that's how you would do it. You pull it towards you on both sides and then pull this down. Camera's hiding up in that corner. You can see the camera. So we'll check out the quality of that. Not too bad. You know what? Solid first impressions. First impressions are always important until I get a lot more prints under my belt. I can't, you know, it's not a review, but solid first impressions. Very similar to some of the other printers on the market. The only difference with this one is it's a little bit smaller at 220 squared and pretty nice. So I'm going to get going pretty quick here. I just got a text saying that lunch was about ready. So I'm going to go do that. But any last questions before I go? I don't want to make this too long here. About an hour and a half is good. Boom. Flash forage M5 Pro so far. So good. I'm going to get this in Orca. I'm going to get some prints going here. We're going to see how it goes. Yeah. Cool. Well, I appreciate everybody being here. I'm going to give you just a minute here if you have last questions. Enjoy the footage. Thank you so much. Color looks like chips from CNC machine that used titanium. Yes, it kind of does look like that. That's a good reference. I love it. This color is, I might have to find, I might have to order some of this. I don't usually do that. But I'm going to do it, I think. I don't usually. So you have right side of the hot end and it slides down to swap the nozzle. Yeah, I'm assuming I need to remove the filament first because if it's down in there, it could be an issue. Burnt titanium. There you go. There you go. Thanks for the help. Matt, if you're doing this tomorrow, I will try to jump in the comments if I can. What is tomorrow? It's Sunday. I don't know. It's my niece's birthday Monday, so I know we're hanging out with her. Well, I'll try, depending on what time. Everybody else, thank you guys for being here. I really appreciate it. Burnt titanium, kind of. Yes, it is called Burnt titanium. Absolutely. High-speed PLA is what they're calling us. High-speed PLA filament. And they gave me a 0.25 kilogram roll and it is Burnt titanium. So I'm going to have to get some of that. But thank you guys for being here. I really appreciate it. Thanks for hanging out with me for an hour and a half. Checking out an unboxing. I may or may not do another one tomorrow. Probably not tomorrow, but we'll go from there. But yeah, thank you. You guys rock. Everybody who donated, thank you guys so much. I really appreciate it. New member, thank you so much for that. It is called Burnt titanium. Yeah, chat me behind the scenes if you can come next week too. Yeah, thank you, Scott. Thank you, everybody else. I do appreciate it. Man, we'll be back with some more. I got a bunch of printers that I would like to do this with and check out. I have that giant Elgu Max. It's not quite as big as the M500, but it's a big printer. I think it's 440 or something like that. So that one I want to play. That one I got to get out. I got the Creality K1 Max. I have a bunch of other ones. So we'll get them rocking and rolling. You guys are awesome. Thank you so much. Have a great weekend. Again, thank you guys for hanging out with me and we will see you in the next one. You guys are awesome. Keep printing. See you guys. Bye.