 Hey guys, Shaber1000 here. So today I had an issue with this thing We're going down the river and all once it just revved up like a clutch Slipping in a you know in a vehicle that the clutch is going out Things bother me. It's dark. We're gonna do some night fishing, but I don't feel well and But I thought I'd come out and check this out. Now what I did was I looked at this Now If you watch this here's the propeller watch the output the end of the output shaft. I Got it in gear. It's not turning so I do know That there is There's a shear pin in here now. We've never hit anything with it Well, I've never but so what I'm gonna do Is I'm gonna pull this pin out of here We're gonna try to get this this prop off of here and see if that's the issue I May not have to rebuild the slower unit if that's the issue so This is what I pulled out here All right, so Let's see If we can get this off here. Well, that didn't take much It didn't take much at all Sometimes they're these are hard to get off and it's loose. So it's making me think that Okay, well, there's there's the pin So What it does is it goes inside of here see that pin? Right there It goes inside of here So I'm just wondering if the prop is bad because that pin so I thought it might be this pin I'm just wondering if this prop was just not on there tight And that was causing it not to be all the way back in there Because you've seen how loose that nut was See it's spinning. So my prop Right here. Let me get you around here. I still got you zoomed in See this is part of the prop right here. Okay. This is the outer problem This is the inner prop inner part of it. Look at that so I Think I think I can get by Was putting a new prop on this thing because I think I just lost my damn Pin yeah, I did I'm down here looking for guys Pretty good size. I should be able to find it. There it is. Yeah so I Think there's a guy I want you down the road Let me back up a little bit so I don't knock you over Just a few miles up the road for me next to little town over I think it's five miles Where I got the lower unit grease He may have a prop for this thing If I remember right these are these are set up something like Yeah, see that's coming out of there Just for me pulling on it. These are set up kind of like a Harmonic balancer a crank pulley on your vehicle They're set up something like that and they're mounted in rubber. I do believe If not, then it's a press fit which this is real You know what let's let me go get a hammer and a punch. Let's try to tap this out of there See what it looks like Okay, guys, so I got me a Socket that'll fit in here. I Just got this set on a couple blocks Let's try to try to drive that out there. It's coming out. It looks like there it goes. Okay Yes, there is rubber in there Okay, see that's what happened just like a Harmonic balancer or some guys call them crank pulleys. They're mounted in rubber for vibration dampening and stuff and This will happen sometimes so what I'm guessing is It just got too worn or maybe it's been hot or something Maybe it's just got too old. It's 1963 guys. So And then, you know, maybe someone's hit something and it kind of made it loose So I just need to find me a prop so Because If you watch my last video, I said something about Having issues hang on a second. I gotta back you out All right, so I Had mentioned something about issues with this With my lower unit Well, there's the issue the props bad. So I Won't try to get a new prop I might just wait till Monday and run down here and see if this guy's got one Because I started to tell you I'd like to have it running good by next weekend because That place where we was fishing at Well, we got it. They're open again now. So I went ahead and we reserved it So and that that is that's bear territory there No electric no water. It is primitive And it's right there on the dam river. So and it's free totally free So that's awesome. We're going to be going out Friday night We're staying till we'll come back Monday morning. So that should be fun So I'm gonna get this get this ready. I don't see any leaks here Any oil coming out of here, so that's good Everything else has been fine Now I was looking at lower units. I really didn't want to pay it kind of money for a lower unit But I mean I may sometime if I run across another 18 fast twin because they made thousands of these things I Will get get a lower unit either to change it and keep this one on hand as a backup or vice versa, whatever But I'm gonna look for some numbers on this thing I'm not sure what the pitch is there. There's usually numbers printed on these So I got to go look for that and I'm gonna say she bear the myth man legend. Thanks for watching guys I appreciate it and Y'all enjoy the rest of your weekend. Be safe and God bless. Bye. Bye guys. Take care