 We got the apprentice with us again. We've got a prep table. It's leaking water and one that's freezing up, I guess The refrigerator or something cooler. I'll let you change that all by yourself, huh? Yep, whole condensers. So you had to chop it out and replace the whole thing, huh? Yep, they never give me the whole condenser. What the heck? Oh, the only reason they did the whole condensers is the fan quit working Because of the grease in it. Mm-hmm. And then look at this condenser. Look at that thing. Oh, it looks great. That's normal. You just got to put some yellow cleaner in it Break it loose You'd be good. Just like new again When in doubt rip it out. Let's go inside and see what's going on Basically, I'm just gonna be technical assistance if you need it I have to wait on hold for six hours for them to call you back and eventually after you're already home Yeah, this is you called seven eight hours ago. What's going on? Well now I'm at home So that one is that's the one I fixed that the wire fell off so now it's holding water Yes, sir that thought this one was just We noticed it was leaking behind here and at first he's like, ah, the hose isn't even in the pan but Well, the hose is in the pan now and it's still Doing it sitting down there too. Are they both cool and okay? Yes. All right Good and nice and cool. Good. They also want me to show you guys what you were here I don't know if this is anything to be concerned about I Little infiltration I've replaced some of this not too long ago This one here. We had a drain line issue and I already fixed it. I don't know how the heck it's getting all that freaking Infiltration around it We've got it sealed up pretty good. I mean good grief And it's nice and hot so my heater is working good All I can assume is you've got that nice warm heater in there And it's just hot it's warm and it's hitting that zero to negative five ten degrees and doing its thing Yeah, I don't know on that. Let's focus on the ones that are leaking water. That's the big ones So let's go look at that I mean they put water they may put ice in there or something. I don't know could be just condensated to Well, it looks like it's not frozen is it He says it's cool and okay, so I mean we can assume this maybe not a night and a refrigeration issue, but Right now seems like a drain issue Let me see if the pan is filling up a water Do you know what the pan is on this thing? It's around the very bottom there so you've got the Loom them thing there you got some screws on the front you pop that up you can get inside there You can see the pan or you can pull it out And check the back side and see if there's any water in the drain pan. See if the hose is clear may just be plugged up On the suction line And that can happen because I mean it is real thin insulation But I mean in reality if this is a cooler not a freezer it shouldn't be freezing up. I Mean, you know, what's some of the reasons why it would freeze up? Could be correct Or possibly a capillary tube that's getting plugged up Feel your liquid line, which is right there in front. See if that's warm. Don't get your finger chopped off though You're only gonna feel it maybe on the dryer see if the dryer there see how that feels and be careful There's a cover missing there on the compressor. Does it feel warm? I mean it's not cold But I mean is it like above room temperature? Oh, yeah, okay. Yeah, so we're probably feeding okay So I doubt we're low on charge Could have an airflow issue. It could be dirty coils You know sometimes they can get sick oil being dirty will build up artificial head pressure Which brings everything up and make something for it being low on charge. How's that drain line right here on the left? yep Anything coming out of that doesn't look like you're coming out of it. How is there anything in the pan? Yeah, I mean I can see water down in so it's draining. This may not be drained to pass it No, we also got one here too. Yeah, it could be either or So probably should get both of us cleaned out We can do one of two things we can pull the cover off the evaporator and clean it completely out the pan That way if there's any crap in there, it'll plug up again later Or we could just suck it out in the vacuum cleaner You might want to pull the pan cover there get into it that way Get some of that stuff out of the way. We're gonna have to yank this just make it a little bit of a mess Ain't it we could put them on a push part and throw it in the cooler Make a good use of this The way we shove right into your cooler there Keep it nice and cool here for a while. It looks like we got a little something to run down there. The pan is underneath This right here and rate But this does it falls down into this tray and then it comes down to a Little drain hole right down there. So you're gonna need to yank that motor out of there There's a hole open Actually don't look too horribly bad. Well, we definitely want to blow that out Ready yep seems open to me Yeah, I don't usually get too much crap on it See when it comes down to but sometimes we're just a bunch of uh, lonely cooks cleaning up the prep line And the most important part is going to be inside the actual Pan area which we could have some you know some Seals on there leaking through do you feel any water on the back side of this? I mean, it's kind of damp. You could be leaking this whole piece right here comes off and there's silicone squeezed in back behind it It could be leaking down to a silicone going around it and falling down Um, yeah, that's very possible. What's going on? And we've got a little bit of a gap down here So I don't know if that possibly is it what we can do is get our pump sprayer out spring some water on it And see if we've got any leakage coming out along the side over here Or possibly over here. I notice that insulation crap right here looks I don't know. It's really hard. I don't know if that's factory or what but That right there could be possibly somebody jerry-ring something up to try to keep it from doing it before So you kind of just look for the clues And also i'm kind of wondering is this thermostat all the way into See that's kind of loose I wonder if our thermostat's got issues is that why it's freezing up because maybe it's never shutting off It makes me wonder that's one of the things where we may want to note that so that you know, we're covered If uh, it still starts freezing up. I may have to check the pressures if we can check them. I don't know if it's got it There's this plug See how it's all burned up and stuff It's not the greatest shape or stay snare. We at least clean that up wire brush But it about needs a new plug that you gotta have a right angle Which is kind of paying the 90. I think I might have one Pain in the heiny Pain in the mother food. You're gonna have to cut that out. Yeah, so we've already cleaned most of it out We're gonna blow some of this crap out of here Then we're gonna spray some water in this thing and track it down the corners to see if we can I know where it's coming from this also blows some of the water out so that uh, We can tell there's something new coming in You're watering already Well, you're just johnny on the spot, aren't you I don't know What do you see Come up here it's leaking all out through that and then it's leaking out back this way So what do you think it's coming from? Down here really this should all be sealed here and back here This I can there's literally See it. Is it coming right on through? Well, it's not Obviously it must be coming through. Yeah, it's not shooting out of there, but it's coming back through You can see it all right here. We're gonna do about it The silicone it yeah, unfortunately, it's got to be perfectly dry or one stick. Yeah, I know Well, they just got to shoot get take all them screws out of there and then we'll have to remove the old silicone and then uh, re-silicone it Yeah, it's kind of floppy dink. Yeah, I'm just gonna help this up ties That's a plastic wannabe razor blade Just plastic that way it's not destroying the metal Otherwise the razor blade wants to cut into it and we're just heating it up So that we can get a nice little razor thing there works pretty good We'll eat in a little bit in that soft aluminum, but most part of it gets it off there Try eating it up and then peeling it that and work real great. Just went right into straight brand new razor blade Got majority of it off. You gotta get a clean surface and put that silicone on there. We should be good Unfortunately, I'll never get a cure 100% because we're gonna put it right back underneath the colder temperatures, but Gotta do what you gotta do Well, we just discovered But this has been eight through And it's kind of about the vicinity of where it happened at They really need a new outside pan. I'm assuming we probably can still get it. I'm gonna see if it's available But you can see that it's been Sealed before and silicone I'll tell you right now does not hold up against underwater very long That's why you never use it on your penetrations on your roofs stuff like that. It will leak I've had several calls out because of it That's why you gotta use the right clock for the job you're working on but that's basically where I think it's coming out at We're gonna try to silicone it up and we're also going to check to see if we can get a new piece here Silicone and over top of it and look what we found That is loose the goose. We're gonna rip that out as much as I don't want to just see if we can get that new piece Yeah, you got the back well pretty clean too. Good coil looks like crap, but it's kind of generic, but We're gonna do this like I told him I said this don't work and we're going to Order a new one that way we ain't doing it twice for no good reason Yeah, I wish I had somebody to give me a hand when I needed it. I never get that now Now how you gonna still come behind it? I was test fitting test fittings out here doing okay. I got you You have plenty on there to feed the needy There you go. So now you can come over and get this side That new hole or the existing hole? No, that's existing. All right, I don't ever need it that much there Oh, we got it now. Oh, you definitely got enough on there. That's for sure. I wouldn't like Too much on the outside because we can possible to get it off. It's already gonna be a disaster to get off I'm hoping that this is the last time you've ever asked me to go on Yeah, this thing is kind of getting a little Old Gasket seals they're Leaving room for to be desired Sometimes that little tube in there will just slide across and it barely even does anything Just really depends All right, the other one here has got water coming out too. I tried blowing on the hose and nothing came out So I'm going to try to suck it out and see if we can get it I can see the screen here Probably blow off the hose While I'm holding it You know what? Let's go grab something to jam up in there very different story that Yeah, it feels like It probably is a piece of ice up in there, which they give you bad information. That's what happens last time I was here that was told everything works fine And the problem was the thermostat wire fell off Now they're telling me there's times where sometimes it will freeze up which looking at it right here The bottom is froze up Which could be a problem with the thermostat not allowing it to defrost all the way Or it could be the one charge, but we checked the charge and I think it was fine Yeah, it's getting icy in the back. So it's not properly defrosting all the way I'm gonna say we need to get new thermostat for it. And that's the one that like I said that came apart We're just gonna have to get order it and get it come back And we got universal ones. I don't count on them. Unfortunately. We don't stock nothing. We'll have to order it All right, we're gonna order new door seals for this thing because they're tore up. You can see that there And we'll go ahead and get new thermostat for it. Also The other one needs door seals also. So I'm gonna get that okayed But that's froze up. So they're just gonna need to open it up overnight when we come back We'll schedule that up that way. We're not sitting here wasting time trying to fall it out Basically just getting water in the bottom there. It'll be fine until then