 This is a video to show you how to install CAT 6 modules into a Euro-style floor box plate. Take the stripping tool and strip off the outer plastic sleeve. Separate out the inner cable cores. Cutting out the central plastic divider. Take the CAT 6 module and you will notice the cable core and panel colors match. Place the cable into the module slot. Untwist the pair just enough to slot into the termination slots and place securely. Ensure that both colors match the module. Continue and do the same for the three remaining color pairs. Once in place, terminate all cables with a punch-down tool. Ensure you hear a distinct termination click. The tool should automatically cut off the spare cable. Double check the colors. Secure cable to module with a cable tie. Cut off any slack. Place cable and module into floor box faceplate and firmly click into place. Feed back any slack into floor. Secure faceplate and fit with screws. Further assistance or a free survey, please email or call on the details below and click like and subscribe if you have enjoyed this video.