 you. Everybody clap your hands. Now this means, okay. So it is 24, nope, 24 hours minus however many hours it is from when we did this yesterday to today. And so it's time to see what they look like as soon as I find all of your beautiful faces on my this. For some reason I have to search my name now to find my live feeds, but it's whatever. It's okay. What's up Josh? How are you doing today? I'm really excited about how these turned out. We did these yesterday so if you want to see the video of how these were born then please check out yesterday's video. I'm going to reveal how these turned out, but before I do that I want to make a few more and I need to just prep my adhesive before we move on to that part. So these are our clear ornament shaped pieces and they come in a pack of 10 and you can get them from our website, artistildet.com. You peel one side of the brown paper, you leave the backside on so that if you do acrylics on it or resin then it won't give you a whole bunch of nasty time-consuming cleanup. So this is very hard for my brain to understand. What I'm going to do on this one is the decorating that I do I want to be seen from the backside so I have to kind of like layer things down inverted. If that makes sense. Oh you've been doing a lot of ornaments lately. That's awesome. Hi Clara, what's up? So I'm going to zoom you guys in just a little bit more so you can see what I'm doing and so let me see if I can do this without it being absolutely ridiculous. So I just want to kind of eye cat this sticky pin on here. Now this sticky pin is from Deco Foil. You can't really see what I'm doing right now because everything is clear but essentially I'm just kind of slash mark applying some dried up sticky pin apparently. And I'm just doing a North-South Esk kind of application. Yeah when you do stuff that's kind of hard to see you have to do it with like light in a certain angle so you can see what you're doing. Luckily we have light everywhere because windows. So I don't know if you guys can see what I have applied to this but I hope so. The sticky pin doesn't take that long. Oh you can see it. I'm just now seeing the replay that you guys are seeing. So I'm going to take some of my this. This is loose gold leaf or metal leaf that when I have big pieces I'll save it in this jar because it's ASMR-y. I never watch those. Pardon my frog voice. I'm still slightly under the weather and so I save these big pieces so that I can kind of use them later because waste not want not. So I'm just going to put some of these copper because they were on top bits down. If you've never used loose metal leaf or gold leaf it is very light. It sticks to almost everything. Sometimes it sticks to things that you don't want it to stick to and doesn't stick to things that you do want it to stick to very much like a cling wrap saran wrap. Not hating on saran wrap if you're watching. I'm just using this stiffer bristle yet fluffy brush to apply this. It's synthetic. It's from Artist Loft so this brush probably came in a pack of $9,000 for $7. It's not an exact quote but you know what I mean. I'm just trying to cover all of where the sticky is and if you don't cover everything it's fine because when you start to dust it around like right here I didn't have any gold on it but the sticky is working. So all of the kind of overflow that I'm brushing off will stick to that. The only downside about that is the leaf that gets dusted around ends up with a texture that sometimes isn't the most beautiful but is what it is. I like it on some applications and not so much on others. So once you have all of your leaf down you can dust it off. When you're using a sticky pen like I'm using if you're using like the APS foil adhesive I would recommend waiting. I think the bottle says an hour before applying any foil or anything to it and I just I didn't have the time to do that before we went live. So this is what we're doing. Ding dang boom. And so this is still gonna in my head be the backside but we'll see. We will see. All right so I'm gonna set this one aside. I also wanted to what's up Susan. Hi Angie. Tim. Two. An Italian drip. I didn't prep any resin but you're welcome to come over and art with me too. You put some in your alcohol spray. You put wait. Josh you put the leaf in your alcohol spray. Thank you Tim for your thumbs. Okay on this one I'm gonna do a foil application and this foil is from APS. I have links down in the description box. Initially I was gonna do full coverage but my sticky pen's being kind of sketchy so I'm gonna just kind of sketchy apply my sticky. Now when your sticky pen kind of dries up a little bit the nib will get kind of rough and dry. It's gonna leave kind of a texture or a look to what you're putting out because it's kind of getting scratchy. I even switched the nibs out. Most sticky pens will come with spare nibs because this is a recurring problem. I mean it's glue. It's gonna kind of mess with everything else. All right well it's still sticky so the point I was going to make is that you're going to be able to see all of those little lines that are from the nib kind of scratching back over itself. If you wanted a super smooth application I would go with the APS foil adhesive and use a very tight bristle brush so that you don't have any kind of texture but I like the texture. I feel like it's kind of just something different and in my world something different is always something welcome because if everything is the same it's going to be quite boring. I'm just okay I was going to say I just hope this is sticky enough to pull the foil off but I do believe it will be. Okay usually it said that you should use a scrubber brush to make sure that there's full contact. I think that that's probably the best way to make sure just use a scrubby brush like this. There is going to be a little bit of difference in look right here because I let a fold go in. Oh my goodness I just I thought I did this backwards so there's going to be a little bit of texture left that is okay. Now I'm going to let that kind of do its thing till the end of the video and in a moment I'm going to peel these guys. I just want to set all the things that we're going to need to be sticky. I don't want to break. I don't know. I bet you could put it in like a little food processor or chopper and not have to shake shake shake so much. That is an assumption I have no idea. Okay so this is the next one that we're going to use and actually I'm not even sure surely this is the top side right. We'll find out. I think I'm just going to go artsy on this one and do little dots. Oh my goodness I hope I don't make this look like an Easter egg. But if I do that's okay. I haven't decorated an Easter egg in so long. Nope. An Easter egg flavored ornament. Trying to make this quick and random and cute. We'll see if it works. If you guys made your own ornaments I know a couple of you have said that you have made your own ornaments. Boom. So riveting to see it go down clear like that. I know I know I know. Hello Kathy these are the clear ornament blanks that we have on our website. Hopefully you can kind of see a little bit of that design we put down. Okay. Okay. No this way. I have put an entire one of these down before and it was upside down. Don't make my mistake. I hope I'm not making my mistake on this one but honestly it could be. So that one aside as well and we'll start healing these guys. So these are the ones that we made yesterday with our transparent colors that we mixed up. Where's mine? Can I see the back of that foil coating? It can be wiped off with a little acetone. It goes on a lot better and more vibrant. What? Okay. Which foil did you want to see the back of? So as you can see on the back of this, I hope you can. There's a whole bunch of resin from where we were manipulating it and moving it around and handling it with sticky fingers. And that is not fun to kind of address after your piece is cured. But with our clear shapes and it comes in a whole bunch of different shapes and sizes, you just peel off one side, art on that side, and then after it's cured or dry, you peel off the other side and you have a beautiful, clear something. And I think this is super cute. It actually, I wish I had a, nope, I was going to find my phone but whatever. I wish you guys could see. I hope you can see. It'll project color out. Maybe not. Hopefully you can see it kind of a little bit under here but I'll try to get you guys a close up of that in a bit but love it. Oh, this is the first one Jeff did. It kind of traveled some so it looks more like a v-neck. The one I just did. Yes. So, okay. Okay. I can't pick it up. Yes, I can. No, I can't. So this is what the back of it looks like. Reminiscent to the front. This is what the back of the other one looks like. Some of the APS foils come off super easy and some of them not so much. And so I think they're made a little bit differently but I have been told recently that she's gone fully to the easy to take apart. What? Oh yeah. She's gone all the way with the those, the easy peel ones. What's up Julie? Just rub it in, Tudor. So I didn't undo all of them. I just want to let everybody know that there's some of those in. We are in stock. This looks like, this looks like an old hippie poncho. I was going to say it looks like, I said before you walked in that it was like a little shirt. So let me show you guys the back of this because this is kind of something that I love about translucent and heavy whites. It kind of gives this feathery, drippy look where the white sinks through. People think you have to fill a petri dish with resin and drop alcohol inks in it to get that look. You just, you can do it this way. I think it looks super cute. The cells are so dynamic. It almost looks like, oh never mind my dirty fingers. I've been playing in play the last few days. It looks like if you cut an orange, how those little membranes look. Super cute. I do have a swipe one here. I was going to wait to peel it, but you guys let me know if I should wait or not. This is the one that we didn't have a back on when we did it. So it's gross on the back. And so the only way you can, I could heat it up intensely and peel this off, but then you'd risk messing up your front side. You can sand it down, but best practice is just to keep the backing on until it's cured and then peel it off. Okay, moving on. B, do you want to peel some of these? Well, better get to getting, exaggerating our tree. What's up, Sam? Hopefully it kind of should be a little bit. I was hoping you were going to make some and be like, but wait, we have some already. Well, I have these in the works. Oh, look at that. I love that little bit where it kind of sunk through. I like how you have that like deep mulberry color. Okay. Let me get out of your way so you can peel your these and these. I didn't peel that one. It's up there. No, not in there. It's up here. I think it needs to cure more. I prepped all of these for you to peel before we start losing people. Well, nails. You should have done this one. This is your mud one. Look, the back looks fun. How fun is that? This is so fun. If you get like, look at that. That would look good on our tree this year. Yeah, I think we need to let these dry. Well, we did use art code on these. Yeah, we did them later, so it hasn't been 12 hours. It has not even been 24 hours. Done, done, done, done, done, done, done, done, done. I feel, I started peeling them from the top. I think I need a little heat with this one. Thanks, you guys. Josh says, I like that they aren't, quote, traditional Christmas colors. Yeah, it's difficult to do that with these because traditional Christmas colors, what, red and green, they just, they don't make, can we show them those then? That makes sense. No, no. I feel so easily. What am I showing? The green and red. God, that looks so fun. In the middle, this peels right off. So these are not clear ones that we did the other day when we were doing the bottom of our wine glasses. That video was awesome. And these don't look horrible, but definitely got it. Oh, that looks fun. Look how good they look down here. Yeah, a little heat on these. I had them in the sunlight today, so I think that helped a little bit. There's that copper sticking to everything. That just comes right off with a little heat on there. I think I showed everybody the back of the rest of them. That looks like just a little school of fish to me. And these looks, I have videos from years ago where I did large pieces with this feathering technique. It's there on my channel, which, so are you right now? So after this video, you could find them. Agreed, Josh. Love how the white drops and creates that technique. Same. Yeah, you add just those lines of that mulberry. So fun. You're going to have to heat this one. Look at that. I forgot about that. You want to do that one? No, I've been peeling all the other ones. If you lay it in the copper leaf, it's going to stick. So the art coat is a softer epoxy. It takes a little bit. Weird to use into it. Yeah, we just didn't use a quick hearing resin. Because we wouldn't have had that much time to play with it. Essentially, the longer the working time, the longer the cure time. Look at that. Look how easy that is when you put a little heat on there. Hey, Janine, how have you been? We missed you. We're coming to Australia this coming year, probably in April, March. I'll see how the weather is. Janine, how's the weather in May? It's gonna be May. Mm-hmm, mm-hmm, mm-hmm. Ew. It's a nail, so it's difficult for me to get these edges. You have this pop. Most times, I like the backside more than the front side. Is that weird? I don't know if those are going to pop off right now. Oh, they did. If you wait, the buddies are cleaning up the edge. If you wait until it's at least 24 hours cure, it just comes right off. That's so fun. All right, you guys, so this is the front side. Booze and Oz. Little swipe actions in the back. I'm not sure what that would have been. Should have put more white in there. Ooh, that one looks good. How fun is that? Do you see a crane right here? Anyone? The pink and blue crane. Love it. All right, let's finish these other bad boys. I'm just dropping everything over here. That might be. Where's mine? I don't have my vivid enamel gel gloss medium, but assuming that this will work, both my brain and the inflection in my voice are not sure if it will work. May is chilly. I really love how this turned out and all of the pieces. Is it hoodie weather? Let's see how these turned out. Let's brush it one more time. Make sure we got it all. That looks cute. That looks cute. So I'm just going to resin over this in a color that's translucent. And all of this action will show through it. Look pretty cute, I think. I actually want to do a little something up here. Have a great day, Josh. Let's just get that. And I think I want just these to be a little bit more filled in. But if they're not, I kind of like it. The scratchy look anyways. Canvas says let me try. Definitely hoodie weather. Let's do this little top doodad. So essentially picture this. Maybe not with all the colors, but that's essentially what I'm going to do with this. I would resin it with you guys right now, but I want to let the glue kind of settle before I do anything that will seal it in like with resin. But this is essentially going to be the look with probably just one color. You can still see the interference, the holographic through there. Or you could just leave it plain because let's see if I can peel back this off without compromising it so I can push back on. Oh my goodness, I'm scared. Okay. What do you want to keep? I just want you guys to see what it looks like clear. Meh. I'll just tape the whole back of it if I need to. Okay. So that's what it would look like clear. That would be cute just hanging on a tree just like that. In fact, let's just make it clear. How cute would a whole tree of these bad boys be? Super cute. Agreed. But if you wanted to make them a color, then you could. And then they would look like that. Love it. Okay. Next. I was debating on what to do with this one, but I'm thinking let's not do that one yet. Kathy, what shape are you looking for on the big blanks? I miss some, but that's okay. A little bit of weak glue there. It would be almost impossible to patch this one because then I would have to line up these little chevrons and I don't think that that's going to happen. So let's just see what it looks like without the backing on it. I'm just going to heat it up slightly just like I did this one. Kathy, also you use my search feature on the website. Then in search just clear. It should bring up all the clear items. So that's what it looks like without the backing on it. That's different. I think I'm going to just spray paint the back of this one. This one I'm going to let live. I'm going to spray paint back that one. Maybe I can get Jeff to just do it when he's done working on the tree. Okay, so we're going to paint this one. That's done. It's weird. You can still see through it. Okay, and this one. I think I might just spray paint the back of this one too. Or we will put a foil on the backside. Which do you guys think? Yes, this looks cute just like this, but I think we're going to do something to the back of it. As soon as I get this little ring off. Okay, I'm just going to spray paint the back of this. So this is the side with all the foil on it. And effectively probably should have just resin this, then peel the back and then spray painted it. But I'm impatient and I wanted to show you guys. So I'll just mod podge the front of it. You could cut us a star. Okay, there just spray painted the back of this. And it looks like this. I need to dust some more, but I don't want to do too much. That's cute. Okay, I'm going to paint the back of this other one that I've lost. Here it is. And then we're going to dismiss class, unless you guys have questions. In which case, I'm always of the level. I just need to find, well, we usually have 900 cans of black spray paint. I don't know why I can't find. I don't know why I can't find any of them. But I found a purple. We're going to do purple. Sorry, I'm not with you guys, but I don't want to get spray paint on everything else. So here's the back of it. And there's the front of it. Makes that sketchy look make more sense. And then the folds, just watch out on folds when you do yours. Cute. So I hope you guys liked all these different ways to make ornaments. I hope you give it a try. Hope you give it a try when you get some clear stuff to play with. Let me move this stuff around and I'll show you a flyover of all of them. But I'm going to show you a flyover at the back of that because I like it. All wrong. I would love to know which one is your fave if you have one. My driver's license came certified. They paid extra to mail it. So let me know what you think. I didn't see search on your page. I was just looking to see what size I could order. I can't find. That's so fun. Well, I found the round acrylic. The three lines, click the three lines. And then scroll down a little bit. And you'll see it on the sidebar. It'll be search under a bunch of different options and I'll have search. If you would like, Kathy, you can send me a message through. There's a 469 number on our website. You should me a message and I can send you a link. All right, you guys, I hope you have an awesome day and we'll see you guys tomorrow at 6 p.m. Central. Till then be kind to one another because you never know what someone's going through. So you don't have to. Our Christmas tree is here. We'll see you guys next time. Bye.