 So righty, I finally have a Yukon Striker in Frontier Canada construction update for you guys. With that, we have some awesome testing shots as well thrown in here. There are two trains constantly testing on Yukon Striker in this footage. So that was super exciting to get on camera. On top of that, Yukon Striker started to operate a little slower when they started using the holding break at the top of the drop. I'm happy to report that it is starting to pick up pace. It's not even that warm out yet. So it was only six degrees Celsius outside today. I have a feeling that they've started using the proper wheels. And when they installed those proper wheels, it started to slow down again because they were wearing in. So that is why we're starting to see it pick up speed. And as warmer weather rolls in, it'll only get faster. So that's super exciting. It's definitely going to be a much more intense dive coaster than the other ones out there. I would probably compare it to Valkyria on a much larger scale. So that's super exciting. That's a great dive coaster to compare it to. I'm very happy that it looks like it's turning out to be very similar to that. And I'm glad that they're shaking off this whole kind of figure or idea of the old dive coaster. So I'm super excited for that. It looks like the area is gonna be really well themed too. So the water tower is going in. It looks like you're either gonna walk underneath it to enter the queue line or you are going to walk beside it. But it's definitely at the entrance of Yukon Stryker. And a new shop is going in. So the shop is most likely in my opinion. If you see it right there, it's near the second drop. It's definitely very Yukon themed. So it's definitely a themed building, which I'm super excited about. I have a feeling it's probably gonna either be an ice cream shop or some sort of Canadian food shop, maybe beaver tails, just because it has a bigger restaurant like Muskoka Burgers and the Muskoka Grill just over in front of Timberwolf. And then coasters the restaurant just over by Slingshot. So it'd be very weird to put in another sit-down restaurant. It is a little too small for a sit-down restaurant as well. But nonetheless, super exciting. And the roofing is going on on Yukon Stryker station. So the station's actually starting to look a lot taller than I was originally anticipating. It's looking very like up there. It's definitely got Yukon-theming mining look to it. I'm a little curious as to what the sound effects that they're gonna play leaving the station. I do have a feeling there's gonna be sound effects playing leaving the station. You said on steel vengeance. I now know that Copperhead Strike has it as well. I'm assuming Yukon Stryker is gonna have it as well. With a coaster that is themed to both the mining and bird, I have no idea what they're gonna do. Are they just gonna play mining sounds? Are they gonna play the bird? The top of the lift hill, I have a feeling it's gonna play a sound effect as well. We have not seen speakers going up the lift. We've only seen speakers at the holding break. So it's a very weird spot. They're pointed outwards. I still am holding hope that it's gonna be theming and not just in case you're stuck there. So we'll see what that ends up being. So fingers crossed it's some sort of theming soundtrack. But other than that, the queue line is moving along. I can see cement padding underneath the brake runs. That's super exciting. They are again only testing two out of three of the trains. The top of the second tunnel is not covered. So I have a feeling it will not be enclosed at any point. I think that it's just meant to look like an old rustic mining kind of shaft or something. And yeah, so one thing I wanna discuss is Mindbuster versus Wild Beast. So when the park opens for the 2019 season, the first thing I'm gonna look for is if Wild Beast has been retracted. There's a reason for that. So I wanna keep an eye on Mindbuster because I think that it takes up valuable land that Splashworks is going to need for an expansion down the road. If Wild Beast is receiving even more retracting, we know that they've been retracting this coaster every year. And Mindbuster is still receiving next to no retracting. They did the turn about three to four years ago, maybe even a little longer. You can correct me down below in the comment section below. But ever since then they had hardly touched it. And this in my opinion is an unrightable experience. I am six foot three. So my knees touch the train, the end of the train, the front of the cart that I'm sitting in. And after the turnaround down into that drop, it really hurts my back. I've never experienced such pain on a coaster that I've experienced on Mindbuster. So I will not be riding this in 2019. Unfortunately, it is unrightable for me. And I'm gonna be paying attention to Wild Beast versus Mindbuster. So that'll be one of the first things I check out other than Yukon Striker for the 2019 season. As you can see, a permanent structure is being built in Kingswood. It looks like it's located in the exact same place that the temporary structure before was located that the ice storm damaged. So they're probably just building a permanent structure for the school events and a Halloween Haunt building. So they can put in back in there the Halloween Haunt maze, whatever they choose to go there. So it won't ever break like the tent did before. No other sign of anything else occurring in there. That's rising pretty quickly. I know that testing rides have started. I do wanna update you. I have noticed other people taking drones up into the sky. I want you guys to know that we've seen some of the footage and it is illegal. You are taking off from a place that you shouldn't be taking off from. You're flying over behemoth helix. You're getting too close to the park. The park is gonna start testing rides now and it's a very dangerous thing to do. So my best advice to you is if you're going to fly the drone, you wanna fly 100 feet minimum back from any structure or property that Wonderland owns like we do. And you wanna make sure you're flying at the proper altitude. And you wanna make sure that you're taking off from 100 feet within people and cars and not flying over again any building. So just wanted to update you on that. You're not allowed on Wonderland's property. If you have any questions about that, you can reach out to Grace Peacock at Canada's Wonderland. But I just wanted to include that in here just because I feel quite responsible for other people flying drones. And I just want you to know there are drone laws and park policies you need to abide by. So just make sure you look up those if you're gonna fly a drone. If you have any questions, feel free to reach out and ask me. But nonetheless, we are wrapping up our drone footage on Yukon Striker and Frontier Canada probably within three and a half weeks. You'll see the drone footage come to an end as the park opens up. And we will not be flying on weekends anymore. Every year, Wonderland starts training around here and we will not be interfering with any of their operations. Again, if they see a drone in the sky, they call the rides down. That is why you should not fly a drone anywhere near the park or an operating ride. So if you remember last year when Behemoth was testing, I actually moved the drone back, I think about 400 feet away from the park. You don't want the drone to be visible to operations or the team. And you don't wanna have it anywhere close to the park. So that's just a personal promise that I've made to the park. And my team that we will not be interfering with anything like that. Just wanted to explain that to you guys. So hopefully you enjoyed this quick update on Frontier Canada and Yukon Striker. I know it's been a while. I've been traveling finally and getting some videos out for Dollywood and carolins. So you guys will see that very shortly. And hopefully you enjoyed this one. Don't forget to hit that like button, subscribe if you haven't and share this video for others to enjoy. Thanks so much for watching guys. And hopefully you enjoy the rest of the testing footage. Have a good one. Bye.